[Fri Nov 25 21:53:35 2011] Detection parameters:
  Position = (332.0, 345.0) = 15 22 56.93 8 38 12.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 94.6 +/- 20.6
  Background counts = 147.6
  Rate = 0.004 +/- 0.0008

[Fri Nov 25 21:53:35 2011] Off-axis axis estimate = 4.16'
[Sat Nov 26 01:15:51 2011] Using EEF radius (= 8.51 ")to estimate initial spatial extent for simple fitting
[Sat Nov 26 01:15:51 2011] Initial guess for spatial extent in simple fitting = 8.51"
[Sat Nov 26 01:15:51 2011] source mask rpix=2.0, npix_max = 24, mask sum = 20, frac = 0.829
[Sat Nov 26 01:15:51 2011] Giving source the simple spatial ID 30 for pass 0, mean size = 8.51"
[Sat Nov 26 03:03:47 2011] fullrun_mos1_xmm0550360101_pi300-10000_cl_pass0_src30.ximg exists
[Sat Nov 26 03:03:47 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0550360101_pi300-10000_cl_pass0_src30.csv
[Sat Nov 26 03:03:47 2011] fullrun_mos1_xmm0550360101_pi300-10000_cl_pass0_src30_1.ximg exists
[Sat Nov 26 03:03:47 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0550360101_pi300-10000_cl_pass0_src30.csv
[Sat Nov 26 03:03:47 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0550360101_pi300-10000_cl_pass0_src30_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0550360101_pi300-10000_cl_pass0_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Nov 26 03:03:48 2011] fullrun_mos1_xmm0550360101_pi300-10000_cl_pass0_tfrozen_src30.ximg exists
[Sat Nov 26 03:03:48 2011] fullrun_mos1_xmm0550360101_pi300-10000_cl_pass0_tfrozen_src30_1.ximg exists
[Sat Nov 26 03:03:48 2011] Fit fullrun_mos1_xmm0550360101_pi300-10000_cl_pass0_tfrozen_src30 appears to have run properly
[Sat Nov 26 04:59:20 2011] Spatial fit model total counts = 2472.840000, observed total counts = 2473.000000
[Sat Nov 26 04:59:20 2011] Offset between fit and detection position for source 28 = 0.493977 pixels
[Sat Nov 26 04:59:20 2011] Warning, changing simple spatial fit ID from 30 to 22
[Sat Nov 26 04:59:20 2011] 2349.644000 total counts/ 2145.440000 bgd. counts: snr = 4.408654
Spatial fit parameters:
  Offset between fit and detection position for source 28 = 0.493977 pixels
  Position = (332.5, 345.2) = 15 22 56.79 8 38 12.9
  Extent = 14.2 (11.2-16.5)", rotation angle = 0
  Source counts = 204.2 +/- 48.5
  Background counts = 2145.4
  Rate = 0.007 +/- 0.002
[Sat Nov 26 04:59:20 2011] Vigneting correction estimate = 1.000000
[Sat Nov 26 04:59:20 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Nov 26 04:59:20 2011] Assessing source extent using major axis lower bound
[Sat Nov 26 04:59:20 2011] Source does appear to be extended
[Sat Nov 26 04:59:20 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Nov 26 04:59:20 2011] Source is confused with source 13
[Sat Nov 26 08:04:19 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Nov 26 08:04:19 2011] Initial guess for spatial extent in simple fitting = 14.19"
[Sat Nov 26 08:04:19 2011] source mask rpix=3.3, npix_max = 56, mask sum = 56, frac = 0.989
[Sat Nov 26 08:04:19 2011] Giving source the simple spatial ID 26 for pass 1, mean size = 14.19"
[Sat Nov 26 09:14:38 2011] fullrun_mos1_xmm0550360101_pi300-10000_cl_pass1_src26.ximg exists
[Sat Nov 26 09:14:38 2011] fullrun_mos1_xmm0550360101_pi300-10000_cl_pass1_src26_1.ximg exists
[Sat Nov 26 09:14:38 2011] Fit fullrun_mos1_xmm0550360101_pi300-10000_cl_pass1_src26 appears to have run properly
[Sat Nov 26 09:14:39 2011] fullrun_mos1_xmm0550360101_pi300-10000_cl_pass1_tfrozen_src26.ximg exists
[Sat Nov 26 09:14:39 2011] fullrun_mos1_xmm0550360101_pi300-10000_cl_pass1_tfrozen_src26_1.ximg exists
[Sat Nov 26 09:14:39 2011] Fit fullrun_mos1_xmm0550360101_pi300-10000_cl_pass1_tfrozen_src26 appears to have run properly
[Sat Nov 26 10:54:09 2011] Warning, spatial fit 26 centroid is now closest to src. 10
[Sat Nov 26 10:54:09 2011] Vigneting correction estimate = 1.000000
[Sat Nov 26 10:54:09 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Nov 26 10:54:09 2011] Assessing source extent using major axis lower bound
[Sat Nov 26 10:54:09 2011] Source does appear to be extended
[Sat Nov 26 10:54:09 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Nov 26 21:40:55 2011] XMMSAS src. selection expression = ellipse(28877.138000, 29985.594000, 851.472025, 851.472025, 0.000000, X, Y)
[Sat Nov 26 21:40:55 2011] Writing source region out to fullrun_mos1_xmm0550360101_pi300-10000_pass1_cl_src28_src.reg
[Sat Nov 26 21:40:55 2011] Extracting stamp from image fullrun_mos1_xmm0550360101_pi300-10000_cl_sm2.00.img.gz, (284, 296) - (381, 394)
[Sat Nov 26 21:40:55 2011] XMMSAS bgd. selection expression = annulus(28877.138000, 29985.594000, 1419.120041, 2838.240082, X, Y) && !ellipse(26299.629000, 27888.328540, 1163.392033, 1163.392033, 0.000000, X, Y) && !ellipse(27161.347382, 29595.260529, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25174.952698, 26588.097351, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26084.454224, 29820.906158, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30117.023800, 29169.789200, 385.561611, 385.561611, 0.000000, X, Y) && !ellipse(26905.745056, 30161.620758, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30908.291992, 28296.019287, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25923.906000, 28982.030000, 1272.944037, 1272.944037, 0.000000, X, Y) && !ellipse(28296.244965, 28667.295929, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27785.656000, 29171.988000, 1316.736038, 1316.736038, 0.000000, X, Y)
[Sat Nov 26 21:40:55 2011] Writing fullrun_mos1_xmm0550360101_pi300-10000_pass1_cl_src28.gif
[Sat Nov 26 22:01:02 2011] Mean detx,y = (1183.03, 2844.35) 
[Sat Nov 26 22:01:04 2011] Setting backscal keywords in source and bgd. spectrum
[Sat Nov 26 22:01:26 2011] Binned source spectrum to 10 counts/bin
[Sat Nov 26 22:01:27 2011] Setting source spectrum file to fullrun_mos1_xmm0550360101_pi300-10000_pass1_cl_src28_src_b10.pi.gz
[Sat Nov 26 22:01:27 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0550360101_pi300-10000_pass1_cl_src28_bgd.pi.gz
[Sun Nov 27 04:35:10 2011] Updating aperture counts using extracted products
[Sun Nov 27 04:35:10 2011] Error reading totcts from fullrun_mos1_xmm0550360101_pi300-10000_pass1_cl_src28_src_b10.pi.gz
[Sun Nov 27 04:35:11 2011] Calculating source flux in energy range 0.30-8.00
[Sun Nov 27 04:35:11 2011] Using photon index=1.80, rate=0.00742, arf fullrun_mos1_xmm0550360101_pi300-10000_pass1_cl_src28.arf
[Sun Nov 27 04:35:11 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Nov 27 04:35:12 2011] Updating source flux to 7e-14
[Sun Nov 27 04:35:16 2011] Flag c found in src. 28 procflags, skipping spectral fitting