[Fri Nov 25 21:53:35 2011] Detection parameters:
  Position = (296.7, 352.5) = 15 23 7.29 8 38 48.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 113.6 +/- 23.3
  Background counts = 202.4
  Rate = 0.004 +/- 0.0009

[Fri Nov 25 21:53:35 2011] Off-axis axis estimate = 3.92'
[Sat Nov 26 01:15:51 2011] Using EEF radius (= 8.39 ")to estimate initial spatial extent for simple fitting
[Sat Nov 26 01:15:51 2011] Initial guess for spatial extent in simple fitting = 8.39"
[Sat Nov 26 01:15:51 2011] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.060
[Sat Nov 26 01:15:51 2011] Giving source the simple spatial ID 24 for pass 0, mean size = 8.39"
[Sat Nov 26 03:03:47 2011] fullrun_mos1_xmm0550360101_pi300-10000_cl_pass0_src24.ximg exists
[Sat Nov 26 03:03:47 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0550360101_pi300-10000_cl_pass0_src24.csv
[Sat Nov 26 03:03:47 2011] fullrun_mos1_xmm0550360101_pi300-10000_cl_pass0_src24_1.ximg exists
[Sat Nov 26 03:03:47 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0550360101_pi300-10000_cl_pass0_src24.csv
[Sat Nov 26 03:03:47 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0550360101_pi300-10000_cl_pass0_src24_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0550360101_pi300-10000_cl_pass0_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Nov 26 03:03:48 2011] fullrun_mos1_xmm0550360101_pi300-10000_cl_pass0_tfrozen_src24.ximg exists
[Sat Nov 26 03:03:48 2011] fullrun_mos1_xmm0550360101_pi300-10000_cl_pass0_tfrozen_src24_1.ximg exists
[Sat Nov 26 03:03:48 2011] Fit fullrun_mos1_xmm0550360101_pi300-10000_cl_pass0_tfrozen_src24 appears to have run properly
[Sat Nov 26 04:59:20 2011] Spatial fit model total counts = 2462.140000, observed total counts = 2463.000000
[Sat Nov 26 04:59:20 2011] Offset between fit and detection position for source 26 = 0.949091 pixels
[Sat Nov 26 04:59:20 2011] 2355.812500 total counts/ 2313.960000 bgd. counts: snr = 0.870049
Spatial fit parameters:
  Offset between fit and detection position for source 26 = 0.949091 pixels
  Position = (296.5, 353.4) = 15 23 7.36 8 38 48.6
  Extent = 3.8 (2.1-6.1)", rotation angle = 0
  Source counts = 41.9 +/- 48.5
  Background counts = 2314.0
  Rate = 0.002 +/- 0.002
  Deleting source due to low Poisson probability