[Fri Nov 25 21:53:35 2011] Detection parameters:
  Position = (300.4, 343.3) = 15 23 6.21 8 37 56.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 244.0 +/- 33.1
  Background counts = 223.0
  Rate = 0.01 +/- 0.001

[Fri Nov 25 21:53:35 2011] Off-axis axis estimate = 3.26'
[Sat Nov 26 01:15:51 2011] Using EEF radius (= 8.06 ")to estimate initial spatial extent for simple fitting
[Sat Nov 26 01:15:51 2011] Initial guess for spatial extent in simple fitting = 8.06"
[Sat Nov 26 01:15:51 2011] source mask rpix=1.9, npix_max = 22, mask sum = 21, frac = 0.949
[Sat Nov 26 01:15:51 2011] Giving source the simple spatial ID 9 for pass 0, mean size = 8.06"
[Sat Nov 26 03:03:47 2011] fullrun_mos1_xmm0550360101_pi300-10000_cl_pass0_src9.ximg exists
[Sat Nov 26 03:03:47 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0550360101_pi300-10000_cl_pass0_src9.csv
[Sat Nov 26 03:03:47 2011] fullrun_mos1_xmm0550360101_pi300-10000_cl_pass0_src9_1.ximg exists
[Sat Nov 26 03:03:47 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0550360101_pi300-10000_cl_pass0_src9.csv
[Sat Nov 26 03:03:47 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0550360101_pi300-10000_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0550360101_pi300-10000_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Nov 26 03:03:48 2011] fullrun_mos1_xmm0550360101_pi300-10000_cl_pass0_tfrozen_src9.ximg exists
[Sat Nov 26 03:03:48 2011] fullrun_mos1_xmm0550360101_pi300-10000_cl_pass0_tfrozen_src9_1.ximg exists
[Sat Nov 26 03:03:48 2011] Fit fullrun_mos1_xmm0550360101_pi300-10000_cl_pass0_tfrozen_src9 appears to have run properly
[Sat Nov 26 04:59:20 2011] Source 11 is offset by -4.021147 and 6.735565 pixels which is larger than
2 X fitted extent = 4.641655 x 4.641655, not incorporating fit results
[Sat Nov 26 04:59:20 2011] Vigneting correction estimate = 1.000000
[Sat Nov 26 04:59:20 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Nov 26 04:59:20 2011] Assessing source extent using major
[Sat Nov 26 04:59:20 2011] Source does appear to be extended
[Sat Nov 26 04:59:20 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Nov 26 04:59:20 2011] Source is confused with source 14
[Sat Nov 26 08:04:19 2011] Using EEF radius (= 8.06 ")to estimate initial spatial extent for simple fitting
[Sat Nov 26 08:04:19 2011] Initial guess for spatial extent in simple fitting = 8.06"
[Sat Nov 26 08:04:19 2011] source mask rpix=1.9, npix_max = 22, mask sum = 21, frac = 0.949
[Sat Nov 26 08:04:19 2011] Giving source the simple spatial ID 6 for pass 1, mean size = 8.06"
[Sat Nov 26 09:14:38 2011] fullrun_mos1_xmm0550360101_pi300-10000_cl_pass1_src6.ximg exists
[Sat Nov 26 09:14:38 2011] fullrun_mos1_xmm0550360101_pi300-10000_cl_pass1_src6_1.ximg exists
[Sat Nov 26 09:14:38 2011] Fit fullrun_mos1_xmm0550360101_pi300-10000_cl_pass1_src6 appears to have run properly
[Sat Nov 26 09:14:38 2011] fullrun_mos1_xmm0550360101_pi300-10000_cl_pass1_tfrozen_src6.ximg exists
[Sat Nov 26 09:14:38 2011] fullrun_mos1_xmm0550360101_pi300-10000_cl_pass1_tfrozen_src6_1.ximg exists
[Sat Nov 26 09:14:38 2011] Fit fullrun_mos1_xmm0550360101_pi300-10000_cl_pass1_tfrozen_src6 appears to have run properly
[Sat Nov 26 10:54:09 2011] Source 11 is offset by -3.966273 and 6.735565 pixels which is larger than
2 X fitted extent = 4.405655 x 4.405655, not incorporating fit results
[Sat Nov 26 10:54:09 2011] Vigneting correction estimate = 1.000000
[Sat Nov 26 10:54:09 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Nov 26 10:54:09 2011] Assessing source extent using major
[Sat Nov 26 10:54:09 2011] Source does appear to be extended
[Sat Nov 26 10:54:09 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Nov 26 21:40:54 2011] XMMSAS src. selection expression = ellipse(26084.454224, 29820.906158, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Nov 26 21:40:54 2011] Writing source region out to fullrun_mos1_xmm0550360101_pi300-10000_pass1_cl_src11_src.reg
[Sat Nov 26 21:40:54 2011] Extracting stamp from image fullrun_mos1_xmm0550360101_pi300-10000_cl_sm2.00.img.gz, (263, 306) - (338, 381)
[Sat Nov 26 21:40:54 2011] XMMSAS bgd. selection expression = annulus(26084.454224, 29820.906158, 1087.500000, 2175.000000, X, Y) && !ellipse(26299.629000, 27888.328540, 1163.392033, 1163.392033, 0.000000, X, Y) && !ellipse(24336.122742, 28523.950897, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27161.347382, 29595.260529, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26905.745056, 30161.620758, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25923.906000, 28982.030000, 1272.944037, 1272.944037, 0.000000, X, Y) && !ellipse(28296.244965, 28667.295929, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25022.263020, 30800.034200, 675.454419, 675.454419, 0.000000, X, Y) && !ellipse(24668.955200, 29538.352400, 819.808024, 819.808024, 0.000000, X, Y) && !ellipse(27785.656000, 29171.988000, 1316.736038, 1316.736038, 0.000000, X, Y) && !ellipse(28877.138000, 29985.594000, 1135.296033, 1135.296033, 0.000000, X, Y)
[Sat Nov 26 21:40:54 2011] Writing fullrun_mos1_xmm0550360101_pi300-10000_pass1_cl_src11.gif
[Sat Nov 26 21:50:43 2011] Mean detx,y = (2097.57, 276.20) 
[Sat Nov 26 21:50:45 2011] Setting backscal keywords in source and bgd. spectrum
[Sat Nov 26 21:51:02 2011] Binned source spectrum to 10 counts/bin
[Sat Nov 26 21:51:03 2011] Setting source spectrum file to fullrun_mos1_xmm0550360101_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Sat Nov 26 21:51:03 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0550360101_pi300-10000_pass1_cl_src11_bgd.pi.gz
[Sat Nov 26 22:36:11 2011] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Nov 26 22:36:11 2011] rmf not generated due to insufficient counts
[Sun Nov 27 04:35:08 2011] Updating aperture counts using extracted products
[Sun Nov 27 04:35:08 2011] Error reading totcts from fullrun_mos1_xmm0550360101_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Sun Nov 27 04:35:10 2011] Calculating source flux in energy range 0.30-8.00
[Sun Nov 27 04:35:10 2011] Using photon index=1.80, rate=0.00989, arf fullrun_mos1_xmm0550360101_pi300-10000_pass1_cl_src11.arf
[Sun Nov 27 04:35:10 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Nov 27 04:35:10 2011] Updating source flux to 9.7e-14
[Sun Nov 27 04:35:16 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting