[Mon Jul  8 06:50:28 2013] Detection parameters:
  Position = (396.6, 226.0) = 1 33 46.76 -43 4 11.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1215.1 +/- 43.5
  Background counts = 64.4
  Rate = 0.07 +/- 0.003

[Mon Jul  8 06:50:29 2013] Off-axis axis estimate = 8.85'
[Mon Jul  8 06:52:36 2013] Using EEF radius (= 10.85 ")to estimate initial spatial extent for simple fitting
[Mon Jul  8 06:52:36 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Jul  8 06:52:36 2013] Initial guess for spatial extent in simple fitting = 10.85"
[Mon Jul  8 06:52:36 2013] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.003
[Mon Jul  8 06:52:36 2013] Giving source the simple spatial ID 1 for pass 0, mean size = 10.85"
[Mon Jul  8 07:26:34 2013] fullrun_pn_xmm0550350101_pi300-10000_cl_pass0_src1.ximg exists
[Mon Jul  8 07:26:34 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0550350101_pi300-10000_cl_pass0_src1.csv
[Mon Jul  8 07:26:34 2013] fullrun_pn_xmm0550350101_pi300-10000_cl_pass0_src1_1.ximg exists
[Mon Jul  8 07:26:34 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0550350101_pi300-10000_cl_pass0_src1.csv
[Mon Jul  8 07:26:34 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0550350101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0550350101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul  8 07:26:35 2013] fullrun_pn_xmm0550350101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Mon Jul  8 07:26:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0550350101_pi300-10000_cl_pass0_tfrozen_src1.csv
[Mon Jul  8 07:26:35 2013] fullrun_pn_xmm0550350101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Mon Jul  8 07:26:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0550350101_pi300-10000_cl_pass0_tfrozen_src1.csv
[Mon Jul  8 07:26:35 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0550350101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0550350101_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul  8 07:50:52 2013] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 2 at 13.697322 pixels away
[Mon Jul  8 07:50:52 2013] Vigneting correction estimate = 1.000000
[Mon Jul  8 07:50:52 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul  8 07:50:52 2013] Assessing source extent using major
[Mon Jul  8 07:50:52 2013] Source does appear to be extended
[Mon Jul  8 07:50:52 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul  8 07:51:03 2013] Using EEF radius (= 10.85 ")to estimate initial spatial extent for simple fitting
[Mon Jul  8 07:51:03 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Jul  8 07:51:03 2013] Initial guess for spatial extent in simple fitting = 10.85"
[Mon Jul  8 07:51:03 2013] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.003
[Mon Jul  8 07:51:03 2013] Giving source the simple spatial ID 1 for pass 1, mean size = 10.85"
[Mon Jul  8 08:23:33 2013] fullrun_pn_xmm0550350101_pi300-10000_cl_pass1_src1.ximg exists
[Mon Jul  8 08:23:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0550350101_pi300-10000_cl_pass1_src1.csv
[Mon Jul  8 08:23:33 2013] fullrun_pn_xmm0550350101_pi300-10000_cl_pass1_src1_1.ximg exists
[Mon Jul  8 08:23:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0550350101_pi300-10000_cl_pass1_src1.csv
[Mon Jul  8 08:23:33 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0550350101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0550350101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul  8 08:23:34 2013] fullrun_pn_xmm0550350101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Mon Jul  8 08:23:34 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0550350101_pi300-10000_cl_pass1_tfrozen_src1.csv
[Mon Jul  8 08:23:34 2013] fullrun_pn_xmm0550350101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Mon Jul  8 08:23:34 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0550350101_pi300-10000_cl_pass1_tfrozen_src1.csv
[Mon Jul  8 08:23:34 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0550350101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0550350101_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul  8 08:49:24 2013] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 2 at 13.697322 pixels away
[Mon Jul  8 08:49:24 2013] Vigneting correction estimate = 1.000000
[Mon Jul  8 08:49:24 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul  8 08:49:24 2013] Assessing source extent using major
[Mon Jul  8 08:49:24 2013] Source does appear to be extended
[Mon Jul  8 08:49:24 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul  8 08:49:35 2013] Counts = 1215.093628, rescaling region sizes by 2.000000
[Mon Jul  8 08:49:35 2013] XMMSAS src. selection expression = ellipse(34459.765381, 19609.562592, 1305.000000, 1305.000000, 0.000000, X, Y)
[Mon Jul  8 08:49:35 2013] Writing source region out to fullrun_pn_xmm0550350101_pi300-10000_pass1_cl_src2_src.reg
[Mon Jul  8 08:49:35 2013] Extracting stamp from image fullrun_pn_xmm0550350101_pi300-10000_cl_sm2.00.img.gz, (322, 151) - (472, 301)
[Mon Jul  8 08:49:35 2013] XMMSAS bgd. selection expression = annulus(34459.765381, 19609.562592, 4350.000000, 8700.000000, X, Y) && !ellipse(28776.032654, 22831.910583, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27872.783800, 26496.394200, 1379.383240, 1379.383240, 0.000000, X, Y) && !ellipse(31223.027130, 28810.654236, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31300.349548, 11760.220703, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27629.476837, 28182.742462, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38005.283600, 28146.318400, 289.601608, 289.601608, 0.000000, X, Y) && !ellipse(43069.199677, 27871.525238, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(42906.107800, 27264.388000, 481.089614, 272.445608, 77.554000, X, Y) && !ellipse(41090.732910, 25608.972992, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29071.147125, 12670.628922, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25165.753021, 23603.106323, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24819.390000, 22767.645800, 1897.544055, 562.505616, 309.238300, X, Y) && !ellipse(31788.936660, 21747.480400, 826.640024, 826.640024, 0.000000, X, Y) && !ellipse(39369.636719, 21586.108444, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34261.124054, 21604.651169, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34364.537445, 17177.469467, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27224.279541, 16906.819763, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Jul  8 08:49:35 2013] Writing fullrun_pn_xmm0550350101_pi300-10000_pass1_cl_src2.gif
[Mon Jul  8 08:50:17 2013] Mean detx,y = (9577.72, 937.22) 
[Mon Jul  8 08:50:20 2013] Setting backscal keywords in source and bgd. spectrum
[Mon Jul  8 08:51:51 2013] Binned source spectrum to 10 counts/bin
[Mon Jul  8 08:51:51 2013] Setting source spectrum file to fullrun_pn_xmm0550350101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Mon Jul  8 08:51:51 2013] Setting bgd. spectrum file to fullrun_pn_xmm0550350101_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Mon Jul  8 09:16:36 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Jul  8 09:16:36 2013] rmf not generated due to insufficient counts
[Mon Jul  8 10:12:33 2013] Updating aperture counts using extracted products
[Mon Jul  8 10:12:33 2013] Total counts from fullrun_pn_xmm0550350101_pi300-10000_pass1_cl_src2_src_b10.pi.gz = 2181.00
[Mon Jul  8 10:12:33 2013] Total counts from fullrun_pn_xmm0550350101_pi300-10000_pass1_cl_src2_bgd.pi.gz = 21652.00
[Mon Jul  8 10:12:33 2013] Got source and background scale factors 4998425.000000, 108603320.000000
[Mon Jul  8 10:12:33 2013] User source parameters:
  Position = (396.6, 226.0) = 1 33 46.76 -43 4 11.4
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 1184.5 +/- 47.7
  Background aperture counts = 996.5
  Rate = 0.05 +/- 0.002

[Mon Jul  8 10:12:33 2013] Updating counts from extracted products
[Mon Jul  8 10:12:33 2013] Set source signif. to 1184.48/31.57 = 37.52
[Mon Jul  8 10:12:38 2013] Calculating source flux in energy range 0.30-8.00
[Mon Jul  8 10:12:38 2013] Using photon index=1.80, rate=0.0501, arf fullrun_pn_xmm0550350101_pi300-10000_pass1_cl_src2.arf
[Mon Jul  8 10:12:38 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jul  8 10:12:38 2013] Updating source flux to 1.8e-13
[Mon Jul  8 10:12:45 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Mon Jul  8 10:12:47 2013] xmm0550350101/analysis//spectral/fullrun_pn_xmm0550350101_pi300-10000_pass1_cl_src2_pl.csv not found, spectral fit skipped or did not complete