[Mon Jul  8 06:50:55 2013] Detection parameters:
  Position = (359.3, 331.3) = 1 34 1.62 -42 56 32.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 195.6 +/- 19.7
  Background counts = 60.1
  Rate = 0.008 +/- 0.0008

[Mon Jul  8 06:50:56 2013] Off-axis axis estimate = 5.02'
[Mon Jul  8 07:37:07 2013] Using EEF radius (= 8.94 ")to estimate initial spatial extent for simple fitting
[Mon Jul  8 07:37:07 2013] Initial guess for spatial extent in simple fitting = 8.94"
[Mon Jul  8 07:37:07 2013] source mask rpix=2.1, npix_max = 26, mask sum = 25, frac = 0.958
[Mon Jul  8 07:37:07 2013] Giving source the simple spatial ID 3 for pass 0, mean size = 8.94"
[Mon Jul  8 07:50:46 2013] fullrun_mos2_xmm0550350101_pi300-10000_cl_pass0_src3.ximg exists
[Mon Jul  8 07:50:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550350101_pi300-10000_cl_pass0_src3.csv
[Mon Jul  8 07:50:46 2013] fullrun_mos2_xmm0550350101_pi300-10000_cl_pass0_src3_1.ximg exists
[Mon Jul  8 07:50:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550350101_pi300-10000_cl_pass0_src3.csv
[Mon Jul  8 07:50:46 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0550350101_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0550350101_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul  8 07:50:47 2013] fullrun_mos2_xmm0550350101_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Mon Jul  8 07:50:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550350101_pi300-10000_cl_pass0_tfrozen_src3.csv
[Mon Jul  8 07:50:47 2013] fullrun_mos2_xmm0550350101_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Mon Jul  8 07:50:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550350101_pi300-10000_cl_pass0_tfrozen_src3.csv
[Mon Jul  8 07:50:47 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0550350101_pi300-10000_cl_pass0_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0550350101_pi300-10000_cl_pass0_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul  8 07:50:55 2013] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 9 at 10.881034 pixels away
[Mon Jul  8 07:50:55 2013] Vigneting correction estimate = 1.000000
[Mon Jul  8 07:50:55 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul  8 07:50:55 2013] Assessing source extent using major
[Mon Jul  8 07:50:55 2013] Source does appear to be extended
[Mon Jul  8 07:50:55 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul  8 08:34:50 2013] Using EEF radius (= 8.94 ")to estimate initial spatial extent for simple fitting
[Mon Jul  8 08:34:50 2013] Initial guess for spatial extent in simple fitting = 8.94"
[Mon Jul  8 08:34:50 2013] source mask rpix=2.1, npix_max = 26, mask sum = 25, frac = 0.958
[Mon Jul  8 08:34:50 2013] Giving source the simple spatial ID 3 for pass 1, mean size = 8.94"
[Mon Jul  8 08:49:19 2013] fullrun_mos2_xmm0550350101_pi300-10000_cl_pass1_src3.ximg exists
[Mon Jul  8 08:49:19 2013] fullrun_mos2_xmm0550350101_pi300-10000_cl_pass1_src3_1.ximg exists
[Mon Jul  8 08:49:19 2013] Fit fullrun_mos2_xmm0550350101_pi300-10000_cl_pass1_src3 appears to have run properly
[Mon Jul  8 08:49:19 2013] fullrun_mos2_xmm0550350101_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Mon Jul  8 08:49:19 2013] fullrun_mos2_xmm0550350101_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Mon Jul  8 08:49:19 2013] Fit fullrun_mos2_xmm0550350101_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Mon Jul  8 08:49:28 2013] Spatial fit model total counts = 244.004000, observed total counts = 229.000000
[Mon Jul  8 08:49:28 2013] Offset between fit and detection position for source 9 = 0.174470 pixels
[Mon Jul  8 08:49:28 2013] 245.939000 total counts/ 145.699000 bgd. counts: snr = 8.304486
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 0.174470 pixels
  Position = (359.3, 331.4) = 1 34 1.65 -42 56 32.3
  Extent = 5.1 (4.0-6.5)" x 3.6 (2.8-4.7)", rotation angle = 239 (28-90) degrees
  Source counts = 100.2 +/- 15.7
  Background counts = 145.7
  Rate = 0.004 +/- 0.0006
[Mon Jul  8 08:49:28 2013] Vigneting correction estimate = 1.000000
[Mon Jul  8 08:49:28 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul  8 08:49:28 2013] Assessing source extent using major axis lower bound
[Mon Jul  8 08:49:28 2013] Source does appear to be extended
[Mon Jul  8 08:49:28 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.85
[Mon Jul  8 09:55:44 2013] XMMSAS src. selection expression = ellipse(31208.404800, 28787.254000, 303.924009, 218.880006, 238.716174, X, Y)
[Mon Jul  8 09:55:44 2013] Writing source region out to fullrun_mos2_xmm0550350101_pi300-10000_pass1_cl_src9_src.reg
[Mon Jul  8 09:55:44 2013] Extracting stamp from image fullrun_mos2_xmm0550350101_pi300-10000_cl_sm2.00.img.gz, (342, 314) - (377, 349)
[Mon Jul  8 09:55:44 2013] XMMSAS bgd. selection expression = annulus(31208.404800, 28787.254000, 506.540015, 1013.080029, X, Y) && !ellipse(27877.145935, 26493.543793, 2610.000000, 2610.000000, 0.000000, X, Y)
[Mon Jul  8 09:55:44 2013] Writing fullrun_mos2_xmm0550350101_pi300-10000_pass1_cl_src9.gif
[Mon Jul  8 10:01:29 2013] Mean detx,y = (-1030.35, 3978.39) 
[Mon Jul  8 10:01:30 2013] Setting backscal keywords in source and bgd. spectrum
[Mon Jul  8 10:01:35 2013] Binned source spectrum to 10 counts/bin
[Mon Jul  8 10:01:35 2013] Setting source spectrum file to fullrun_mos2_xmm0550350101_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Mon Jul  8 10:01:35 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0550350101_pi300-10000_pass1_cl_src9_bgd.pi.gz
[Mon Jul  8 10:12:40 2013] Updating aperture counts using extracted products
[Mon Jul  8 10:12:40 2013] Total counts from fullrun_mos2_xmm0550350101_pi300-10000_pass1_cl_src9_src_b10.pi.gz = 115.00
[Mon Jul  8 10:12:40 2013] Total counts from fullrun_mos2_xmm0550350101_pi300-10000_pass1_cl_src9_bgd.pi.gz = 146.00
[Mon Jul  8 10:12:40 2013] Got source and background scale factors 204800.000000, 2157908.000000
[Mon Jul  8 10:12:40 2013] User source parameters:
  Position = (359.3, 331.4) = 1 34 1.65 -42 56 32.3
  Extent = 5.1 (4.0-6.5)" x 3.6 (2.8-4.7)", rotation angle = 239 (28-90) degrees
  Source aperture counts = 101.1 +/- 11.8
  Background aperture counts = 13.9
  Rate = 0.004 +/- 0.0005

[Mon Jul  8 10:12:41 2013] Calculating source flux in energy range 0.30-8.00
[Mon Jul  8 10:12:41 2013] Using photon index=1.80, rate=0.00394, arf fullrun_mos2_xmm0550350101_pi300-10000_pass1_cl_src9.arf
[Mon Jul  8 10:12:41 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jul  8 10:12:41 2013] Updating source flux to 6.9e-14
[Mon Jul  8 10:12:45 2013] xmm0550350101/analysis//spectral/fullrun_mos2_xmm0550350101_pi300-10000_pass1_cl_src9_pl.csv not found, spectral fit skipped or did not complete