[Tue Dec 20 02:29:18 2011] Detection parameters:
  Position = (280.7, 280.3) = 2 9 37.71 35 47 26.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 176.1 +/- 20.3
  Background counts = 68.4
  Rate = 0.006 +/- 0.0007

[Tue Dec 20 02:29:18 2011] Off-axis axis estimate = 1.84'
[Tue Dec 20 02:53:14 2011] Using EEF radius (= 7.35 ")to estimate initial spatial extent for simple fitting
[Tue Dec 20 02:53:14 2011] Initial guess for spatial extent in simple fitting = 7.35"
[Tue Dec 20 02:53:14 2011] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.835
[Tue Dec 20 02:53:14 2011] Giving source the simple spatial ID 3 for pass 0, mean size = 7.35"
[Tue Dec 20 03:15:16 2011] fullrun_mos1_xmm0550270201_pi300-10000_cl_pass0_src3.ximg exists
[Tue Dec 20 03:15:16 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0550270201_pi300-10000_cl_pass0_src3.csv
[Tue Dec 20 03:15:16 2011] fullrun_mos1_xmm0550270201_pi300-10000_cl_pass0_src3_1.ximg exists
[Tue Dec 20 03:15:16 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0550270201_pi300-10000_cl_pass0_src3.csv
[Tue Dec 20 03:15:16 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0550270201_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0550270201_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Dec 20 03:15:16 2011] fullrun_mos1_xmm0550270201_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Tue Dec 20 03:15:16 2011] fullrun_mos1_xmm0550270201_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Tue Dec 20 03:15:16 2011] Fit fullrun_mos1_xmm0550270201_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Tue Dec 20 03:43:17 2011] Source 7 is offset by -3.966114 and -0.000713 pixels which is larger than
2 X fitted extent = 0.837536 x 0.837536, not incorporating fit results
[Tue Dec 20 03:43:17 2011] Warning, spatial fit 3 centroid is now closest to src. 5
[Tue Dec 20 03:43:17 2011] Vigneting correction estimate = 1.000000
[Tue Dec 20 03:43:17 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Dec 20 03:43:17 2011] Assessing source extent using major
[Tue Dec 20 03:43:17 2011] Source does appear to be extended
[Tue Dec 20 03:43:17 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Dec 20 03:43:17 2011] Source is confused with source 5
[Tue Dec 20 03:58:55 2011] Using EEF radius (= 7.35 ")to estimate initial spatial extent for simple fitting
[Tue Dec 20 03:58:55 2011] Initial guess for spatial extent in simple fitting = 7.35"
[Tue Dec 20 03:58:55 2011] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.835
[Tue Dec 20 03:58:55 2011] Giving source the simple spatial ID 3 for pass 1, mean size = 7.35"
[Tue Dec 20 04:21:36 2011] fullrun_mos1_xmm0550270201_pi300-10000_cl_pass1_src3.ximg exists
[Tue Dec 20 04:21:36 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0550270201_pi300-10000_cl_pass1_src3.csv
[Tue Dec 20 04:21:36 2011] fullrun_mos1_xmm0550270201_pi300-10000_cl_pass1_src3_1.ximg exists
[Tue Dec 20 04:21:36 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0550270201_pi300-10000_cl_pass1_src3.csv
[Tue Dec 20 04:21:36 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0550270201_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0550270201_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Dec 20 04:21:36 2011] fullrun_mos1_xmm0550270201_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Tue Dec 20 04:21:36 2011] fullrun_mos1_xmm0550270201_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Tue Dec 20 04:21:36 2011] Fit fullrun_mos1_xmm0550270201_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Tue Dec 20 04:48:30 2011] Source 7 is offset by 2.347842 and -5.434368 pixels which is larger than
2 X fitted extent = 2.117655 x 2.117655, not incorporating fit results
[Tue Dec 20 04:48:30 2011] Vigneting correction estimate = 1.000000
[Tue Dec 20 04:48:30 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Dec 20 04:48:30 2011] Assessing source extent using major
[Tue Dec 20 04:48:30 2011] Source does appear to be extended
[Tue Dec 20 04:48:30 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Dec 20 05:02:12 2011] XMMSAS src. selection expression = ellipse(24375.372040, 24337.513977, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Dec 20 05:02:12 2011] Writing source region out to fullrun_mos1_xmm0550270201_pi300-10000_pass1_cl_src7_src.reg
[Tue Dec 20 05:02:12 2011] Extracting stamp from image fullrun_mos1_xmm0550270201_pi300-10000_cl_sm2.00.img.gz, (243, 243) - (318, 318)
[Tue Dec 20 05:02:12 2011] XMMSAS bgd. selection expression = annulus(24375.372040, 24337.513977, 1087.500000, 2175.000000, X, Y) && !ellipse(24170.215800, 24813.919000, 373.599211, 373.599211, 0.000000, X, Y)
[Tue Dec 20 05:02:12 2011] Writing fullrun_mos1_xmm0550270201_pi300-10000_pass1_cl_src7.gif
[Tue Dec 20 05:02:57 2011] Mean detx,y = (557.30, -490.28) 
[Tue Dec 20 05:02:59 2011] Setting backscal keywords in source and bgd. spectrum
[Tue Dec 20 05:03:16 2011] Binned source spectrum to 10 counts/bin
[Tue Dec 20 05:03:16 2011] Setting source spectrum file to fullrun_mos1_xmm0550270201_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Tue Dec 20 05:03:16 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0550270201_pi300-10000_pass1_cl_src7_bgd.pi.gz
[Tue Dec 20 05:12:03 2011] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Dec 20 05:12:03 2011] rmf not generated due to insufficient counts
[Tue Dec 20 05:35:43 2011] Updating aperture counts using extracted products
[Tue Dec 20 05:35:43 2011] Error reading totcts from fullrun_mos1_xmm0550270201_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Tue Dec 20 05:35:43 2011] Calculating source flux in energy range 0.30-8.00
[Tue Dec 20 05:35:43 2011] Using photon index=1.80, rate=0.00646, arf fullrun_mos1_xmm0550270201_pi300-10000_pass1_cl_src7.arf
[Tue Dec 20 05:35:43 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Dec 20 05:35:43 2011] Updating source flux to 6.5e-14
[Tue Dec 20 05:35:45 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting