[Sun Dec 18 12:36:10 2011] Detection parameters:
  Position = (291.1, 411.0) = 20 21 38.73 37 31 16.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 317.5 +/- 25.2
  Background counts = 82.8
  Rate = 0.03 +/- 0.003

[Sun Dec 18 12:36:10 2011] Off-axis axis estimate = 8.18'
[Sun Dec 18 12:40:18 2011] Using EEF radius (= 10.52 ")to estimate initial spatial extent for simple fitting
[Sun Dec 18 12:40:18 2011] Initial guess for spatial extent in simple fitting = 10.52"
[Sun Dec 18 12:40:18 2011] source mask rpix=2.4, npix_max = 34, mask sum = 36, frac = 1.057
[Sun Dec 18 12:40:18 2011] Giving source the simple spatial ID 3 for pass 0, mean size = 10.52"
[Sun Dec 18 13:12:12 2011] fullrun_pn_xmm0550220201_pi300-10000_cl_pass0_src3.ximg exists
[Sun Dec 18 13:12:12 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0550220201_pi300-10000_cl_pass0_src3.csv
[Sun Dec 18 13:12:12 2011] fullrun_pn_xmm0550220201_pi300-10000_cl_pass0_src3_1.ximg exists
[Sun Dec 18 13:12:12 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0550220201_pi300-10000_cl_pass0_src3.csv
[Sun Dec 18 13:12:12 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0550220201_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0550220201_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Dec 18 13:12:12 2011] fullrun_pn_xmm0550220201_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Sun Dec 18 13:12:12 2011] fullrun_pn_xmm0550220201_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Sun Dec 18 13:12:12 2011] Fit fullrun_pn_xmm0550220201_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Sun Dec 18 14:01:41 2011] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 14.308266 pixels away
[Sun Dec 18 14:01:41 2011] Source 3 is offset by -1.386081 and -5.545200 pixels which is larger than
2 X fitted extent = 1.191968 x 1.191968, not incorporating fit results
[Sun Dec 18 14:01:41 2011] Vigneting correction estimate = 1.000000
[Sun Dec 18 14:01:41 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Dec 18 14:01:41 2011] Assessing source extent using major
[Sun Dec 18 14:01:41 2011] Source does appear to be extended
[Sun Dec 18 14:01:41 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Dec 18 14:01:55 2011] Using EEF radius (= 10.52 ")to estimate initial spatial extent for simple fitting
[Sun Dec 18 14:01:55 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Dec 18 14:01:55 2011] Initial guess for spatial extent in simple fitting = 10.52"
[Sun Dec 18 14:01:55 2011] source mask rpix=2.4, npix_max = 34, mask sum = 36, frac = 1.057
[Sun Dec 18 14:01:55 2011] Giving source the simple spatial ID 3 for pass 1, mean size = 10.52"
[Sun Dec 18 14:26:31 2011] fullrun_pn_xmm0550220201_pi300-10000_cl_pass1_src3.ximg exists
[Sun Dec 18 14:26:31 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0550220201_pi300-10000_cl_pass1_src3.csv
[Sun Dec 18 14:26:31 2011] fullrun_pn_xmm0550220201_pi300-10000_cl_pass1_src3_1.ximg exists
[Sun Dec 18 14:26:31 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0550220201_pi300-10000_cl_pass1_src3.csv
[Sun Dec 18 14:26:31 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0550220201_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0550220201_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Dec 18 14:26:32 2011] fullrun_pn_xmm0550220201_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Sun Dec 18 14:26:32 2011] fullrun_pn_xmm0550220201_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Sun Dec 18 14:26:32 2011] Fit fullrun_pn_xmm0550220201_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Sun Dec 18 14:56:32 2011] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 14.509205 pixels away
[Sun Dec 18 14:56:32 2011] Vigneting correction estimate = 1.000000
[Sun Dec 18 14:56:32 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Dec 18 14:56:32 2011] Assessing source extent using major
[Sun Dec 18 14:56:32 2011] Source does appear to be extended
[Sun Dec 18 14:56:32 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Dec 18 14:56:47 2011] XMMSAS src. selection expression = ellipse(25281.522919, 35707.679596, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Dec 18 14:56:47 2011] Writing source region out to fullrun_pn_xmm0550220201_pi300-10000_pass1_cl_src3_src.reg
[Sun Dec 18 14:56:47 2011] Extracting stamp from image fullrun_pn_xmm0550220201_pi300-10000_cl_sm2.00.img.gz, (254, 373) - (329, 448)
[Sun Dec 18 14:56:47 2011] XMMSAS bgd. selection expression = annulus(25281.522919, 35707.679596, 1087.500000, 2175.000000, X, Y) && !ellipse(27797.465851, 37883.316803, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24321.680000, 34851.652000, 1659.224048, 1659.224048, 0.000000, X, Y)
[Sun Dec 18 14:56:47 2011] Writing fullrun_pn_xmm0550220201_pi300-10000_pass1_cl_src3.gif
[Sun Dec 18 14:58:08 2011] Mean detx,y = (5466.67, 8865.21) 
[Sun Dec 18 14:58:12 2011] Setting backscal keywords in source and bgd. spectrum
[Sun Dec 18 14:58:43 2011] Binned source spectrum to 10 counts/bin
[Sun Dec 18 14:58:44 2011] Setting source spectrum file to fullrun_pn_xmm0550220201_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Sun Dec 18 14:58:44 2011] Setting bgd. spectrum file to fullrun_pn_xmm0550220201_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Sun Dec 18 15:10:32 2011] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Dec 18 15:10:32 2011] rmf not generated due to insufficient counts
[Sun Dec 18 15:50:54 2011] Updating aperture counts using extracted products
[Sun Dec 18 15:50:54 2011] Error reading totcts from fullrun_pn_xmm0550220201_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Sun Dec 18 15:50:54 2011] Calculating source flux in energy range 0.30-8.00
[Sun Dec 18 15:50:54 2011] Using photon index=1.80, rate=0.0329, arf fullrun_pn_xmm0550220201_pi300-10000_pass1_cl_src3.arf
[Sun Dec 18 15:50:54 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Dec 18 15:50:54 2011] Updating source flux to 1.4e-13
[Sun Dec 18 15:51:51 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting