[Sat May  5 22:52:07 2012] Detection parameters:
  Position = (286.2, 341.1) = 20 21 40.67 37 26 14.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 279.0 +/- 32.0
  Background counts = 282.8
  Rate = 0.006 +/- 0.0007

[Sat May  5 22:52:08 2012] Off-axis axis estimate = 3.21'
[Sat May  5 23:02:43 2012] Using EEF radius (= 8.04 ")to estimate initial spatial extent for simple fitting
[Sat May  5 23:02:43 2012] Initial guess for spatial extent in simple fitting = 8.04"
[Sat May  5 23:02:43 2012] source mask rpix=1.8, npix_max = 22, mask sum = 20, frac = 0.907
[Sat May  5 23:02:43 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 8.04"
[Sat May  5 23:47:12 2012] fullrun_pn_xmm0550220101_pi300-10000_cl_pass0_src5.ximg exists
[Sat May  5 23:47:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0550220101_pi300-10000_cl_pass0_src5.csv
[Sat May  5 23:47:12 2012] fullrun_pn_xmm0550220101_pi300-10000_cl_pass0_src5_1.ximg exists
[Sat May  5 23:47:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0550220101_pi300-10000_cl_pass0_src5.csv
[Sat May  5 23:47:12 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0550220101_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0550220101_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May  5 23:47:12 2012] fullrun_pn_xmm0550220101_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Sat May  5 23:47:12 2012] fullrun_pn_xmm0550220101_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Sat May  5 23:47:12 2012] Fit fullrun_pn_xmm0550220101_pi300-10000_cl_pass0_tfrozen_src5 appears to have run properly
[Sun May  6 01:15:43 2012] Spatial fit model total counts = 1033.220000, observed total counts = 1031.000000
[Sun May  6 01:15:43 2012] Offset between fit and detection position for source 6 = 1.069975 pixels
[Sun May  6 01:15:43 2012] 1026.822000 total counts/ 913.610000 bgd. counts: snr = 3.745519
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 1.069975 pixels
  Position = (285.3, 341.7) = 20 21 40.99 37 26 14.7
  Extent = 9.7 (6.0-16.1)", rotation angle = 0
  Source counts = 113.2 +/- 32.0
  Background counts = 913.6
  Rate = 0.007 +/- 0.002
[Sun May  6 01:15:43 2012] Vigneting correction estimate = 1.000000
[Sun May  6 01:15:43 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May  6 01:15:43 2012] Assessing source extent using major axis lower bound
[Sun May  6 01:15:43 2012] Source does appear to be extended
[Sun May  6 01:15:43 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May  6 01:16:06 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun May  6 01:16:06 2012] Initial guess for spatial extent in simple fitting = 9.65"
[Sun May  6 01:16:06 2012] source mask rpix=2.2, npix_max = 29, mask sum = 25, frac = 0.845
[Sun May  6 01:16:06 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 9.65"
[Sun May  6 02:00:27 2012] fullrun_pn_xmm0550220101_pi300-10000_cl_pass1_src3.ximg exists
[Sun May  6 02:00:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0550220101_pi300-10000_cl_pass1_src3.csv
[Sun May  6 02:00:27 2012] fullrun_pn_xmm0550220101_pi300-10000_cl_pass1_src3_1.ximg exists
[Sun May  6 02:00:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0550220101_pi300-10000_cl_pass1_src3.csv
[Sun May  6 02:00:27 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0550220101_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0550220101_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May  6 02:00:27 2012] fullrun_pn_xmm0550220101_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Sun May  6 02:00:27 2012] fullrun_pn_xmm0550220101_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Sun May  6 02:00:27 2012] Fit fullrun_pn_xmm0550220101_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Sun May  6 03:33:03 2012] Warning, spatial fit 3 centroid is now closest to src. 8
[Sun May  6 03:33:03 2012] Vigneting correction estimate = 1.000000
[Sun May  6 03:33:03 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May  6 03:33:03 2012] Assessing source extent using major axis lower bound
[Sun May  6 03:33:03 2012] Source does appear to be extended
[Sun May  6 03:33:03 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May  6 03:33:03 2012] Source is confused with source 8
[Sun May  6 03:33:26 2012] XMMSAS src. selection expression = ellipse(24776.018400, 29676.574600, 579.163817, 579.163817, 0.000000, X, Y)
[Sun May  6 03:33:26 2012] Writing source region out to fullrun_pn_xmm0550220101_pi300-10000_pass1_cl_src6_src.reg
[Sun May  6 03:33:26 2012] Extracting stamp from image fullrun_pn_xmm0550220101_pi300-10000_cl_sm2.00.img.gz, (252, 308) - (319, 375)
[Sun May  6 03:33:26 2012] XMMSAS bgd. selection expression = annulus(24776.018400, 29676.574600, 965.273028, 1930.546056, X, Y) && !ellipse(23773.062714, 30081.008759, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24648.126000, 29418.616000, 1239.320036, 1239.320036, 0.000000, X, Y) && !ellipse(25345.753040, 28444.798400, 401.927212, 401.927212, 0.000000, X, Y)
[Sun May  6 03:33:26 2012] Writing fullrun_pn_xmm0550220101_pi300-10000_pass1_cl_src6.gif
[Sun May  6 03:37:12 2012] Mean detx,y = (2052.57, 3828.06) 
[Sun May  6 03:37:18 2012] Setting backscal keywords in source and bgd. spectrum
[Sun May  6 03:37:45 2012] Binned source spectrum to 10 counts/bin
[Sun May  6 03:37:46 2012] Setting source spectrum file to fullrun_pn_xmm0550220101_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Sun May  6 03:37:46 2012] Setting bgd. spectrum file to fullrun_pn_xmm0550220101_pi300-10000_pass1_cl_src6_bgd.pi.gz
[Sun May  6 06:34:43 2012] Updating aperture counts using extracted products
[Sun May  6 06:34:43 2012] Error reading totcts from fullrun_pn_xmm0550220101_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Sun May  6 06:34:44 2012] Calculating source flux in energy range 0.30-8.00
[Sun May  6 06:34:44 2012] Using photon index=1.80, rate=0.00732, arf fullrun_pn_xmm0550220101_pi300-10000_pass1_cl_src6.arf
[Sun May  6 06:34:44 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun May  6 06:34:44 2012] Updating source flux to 2.3e-14
[Sun May  6 06:40:48 2012] Flag c found in src. 6 procflags, skipping spectral fitting
[Sun May  6 06:42:26 2012] Reading fit data from xmm0550220101/analysis//spectral/fullrun_pn_xmm0550220101_pi300-10000_pass1_cl_src6_pl.csv
[Sun May  6 06:42:26 2012] Spectral fit parameter nH value = 2.89038e+22
[Sun May  6 06:42:26 2012] Spectral fit parameter PhoIndex value = 2.93258
[Sun May  6 06:42:26 2012] Failed to get F(0.3-8.0) from xmm0550220101/analysis//spectral/fullrun_pn_xmm0550220101_pi300-10000_pass1_cl_src6_pl.csv, possibly due to different flux energy range selected
[Sun May  6 06:42:26 2012] Calculating source flux in energy range 0.30-8.00
[Sun May  6 06:42:26 2012] Using Nh = 2.9e+22, photon index=2.93, rate=0.00732, arf fullrun_pn_xmm0550220101_pi300-10000_pass1_cl_src6.arf
[Sun May  6 06:42:26 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun May  6 06:42:26 2012] Updating source flux to 5.3e-14