[Sat May  5 22:53:22 2012] Detection parameters:
  Position = (216.0, 116.8) = 20 22 6.23 37 9 56.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 139.7 +/- 20.7
  Background counts = 88.9
  Rate = 0.002 +/- 0.0003

[Sat May  5 22:53:22 2012] Off-axis axis estimate = 14.46'
[Sun May  6 00:29:13 2012] Using EEF radius (= 13.66 ")to estimate initial spatial extent for simple fitting
[Sun May  6 00:29:13 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun May  6 00:29:13 2012] Initial guess for spatial extent in simple fitting = 13.66"
[Sun May  6 00:29:13 2012] source mask rpix=3.1, npix_max = 53, mask sum = 56, frac = 1.056
[Sun May  6 00:29:13 2012] Giving source the simple spatial ID 13 for pass 0, mean size = 13.66"
[Sun May  6 01:15:36 2012] fullrun_mos2_xmm0550220101_pi300-10000_cl_pass0_src13.ximg exists
[Sun May  6 01:15:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550220101_pi300-10000_cl_pass0_src13.csv
[Sun May  6 01:15:36 2012] fullrun_mos2_xmm0550220101_pi300-10000_cl_pass0_src13_1.ximg exists
[Sun May  6 01:15:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550220101_pi300-10000_cl_pass0_src13.csv
[Sun May  6 01:15:36 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0550220101_pi300-10000_cl_pass0_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0550220101_pi300-10000_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May  6 01:15:36 2012] fullrun_mos2_xmm0550220101_pi300-10000_cl_pass0_tfrozen_src13.ximg exists
[Sun May  6 01:15:36 2012] fullrun_mos2_xmm0550220101_pi300-10000_cl_pass0_tfrozen_src13_1.ximg exists
[Sun May  6 01:15:36 2012] Fit fullrun_mos2_xmm0550220101_pi300-10000_cl_pass0_tfrozen_src13 appears to have run properly
[Sun May  6 01:15:53 2012] Warning: source 13 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 16 at 16.945715 pixels away
[Sun May  6 01:15:53 2012] Vigneting correction estimate = 1.000000
[Sun May  6 01:15:53 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May  6 01:15:53 2012] Assessing source extent using major
[Sun May  6 01:15:53 2012] Source does appear to be extended
[Sun May  6 01:15:53 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May  6 02:43:02 2012] Using EEF radius (= 13.66 ")to estimate initial spatial extent for simple fitting
[Sun May  6 02:43:02 2012] Initial guess for spatial extent in simple fitting = 13.66"
[Sun May  6 02:43:02 2012] source mask rpix=3.1, npix_max = 53, mask sum = 56, frac = 1.056
[Sun May  6 02:43:02 2012] Giving source the simple spatial ID 12 for pass 1, mean size = 13.66"
[Sun May  6 03:32:57 2012] fullrun_mos2_xmm0550220101_pi300-10000_cl_pass1_src12.ximg exists
[Sun May  6 03:32:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550220101_pi300-10000_cl_pass1_src12.csv
[Sun May  6 03:32:57 2012] fullrun_mos2_xmm0550220101_pi300-10000_cl_pass1_src12_1.ximg exists
[Sun May  6 03:32:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550220101_pi300-10000_cl_pass1_src12.csv
[Sun May  6 03:32:57 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0550220101_pi300-10000_cl_pass1_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0550220101_pi300-10000_cl_pass1_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May  6 03:32:57 2012] fullrun_mos2_xmm0550220101_pi300-10000_cl_pass1_tfrozen_src12.ximg exists
[Sun May  6 03:32:57 2012] fullrun_mos2_xmm0550220101_pi300-10000_cl_pass1_tfrozen_src12_1.ximg exists
[Sun May  6 03:32:57 2012] Fit fullrun_mos2_xmm0550220101_pi300-10000_cl_pass1_tfrozen_src12 appears to have run properly
[Sun May  6 03:33:13 2012] Spatial fit model total counts = 594.551000, observed total counts = 572.000000
[Sun May  6 03:33:13 2012] Offset between fit and detection position for source 16 = 0.136713 pixels
[Sun May  6 03:33:13 2012] 598.251900 total counts/ 546.325000 bgd. counts: snr = 2.221605
Spatial fit parameters:
  Offset between fit and detection position for source 16 = 0.136713 pixels
  Position = (215.9, 116.9) = 20 22 6.24 37 9 56.9
  Extent = 4.9 (3.4-6.9)", rotation angle = 0
  Source counts = 51.9 +/- 24.5
  Background counts = 546.3
  Rate = 0.001 +/- 0.0005
[Sun May  6 03:33:13 2012] Vigneting correction estimate = 1.000000
[Sun May  6 03:33:13 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May  6 03:33:13 2012] Assessing source extent using major axis lower bound
[Sun May  6 03:33:13 2012] Source does appear to be extended
[Sun May  6 03:33:13 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May  6 05:20:14 2012] XMMSAS src. selection expression = ellipse(18736.938800, 10124.062800, 292.279808, 292.279808, 0.000000, X, Y)
[Sun May  6 05:20:14 2012] Writing source region out to fullrun_mos2_xmm0550220101_pi300-10000_pass1_cl_src16_src.reg
[Sun May  6 05:20:14 2012] Extracting stamp from image fullrun_mos2_xmm0550220101_pi300-10000_cl_sm2.00.img.gz, (199, 100) - (233, 134)
[Sun May  6 05:20:14 2012] XMMSAS bgd. selection expression = annulus(18736.938800, 10124.062800, 487.133014, 974.266028, X, Y)
[Sun May  6 05:20:14 2012] Writing fullrun_mos2_xmm0550220101_pi300-10000_pass1_cl_src16.gif
[Sun May  6 05:27:09 2012] Mean detx,y = (4782.84, 15348.48) 
[Sun May  6 05:27:11 2012] Setting backscal keywords in source and bgd. spectrum
[Sun May  6 05:27:31 2012] Binned source spectrum to 10 counts/bin
[Sun May  6 05:27:31 2012] Setting source spectrum file to fullrun_mos2_xmm0550220101_pi300-10000_pass1_cl_src16_src_b10.pi.gz
[Sun May  6 05:27:31 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0550220101_pi300-10000_pass1_cl_src16_bgd.pi.gz
[Sun May  6 06:19:59 2012] Not generating rmf since there are only 51 counts
[Sun May  6 06:19:59 2012] rmf not generated due to insufficient counts
[Sun May  6 06:34:47 2012] Updating aperture counts using extracted products
[Sun May  6 06:34:47 2012] Error reading totcts from fullrun_mos2_xmm0550220101_pi300-10000_pass1_cl_src16_src_b10.pi.gz
[Sun May  6 06:34:47 2012] Calculating source flux in energy range 0.30-8.00
[Sun May  6 06:34:47 2012] Using photon index=1.80, rate=0.00114, arf fullrun_mos2_xmm0550220101_pi300-10000_pass1_cl_src16.arf
[Sun May  6 06:34:47 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun May  6 06:34:48 2012] Updating source flux to 5.7e-14
[Sun May  6 06:37:43 2012] Source 16 has fewer than 100.000000 counts, skipping spectral fitting