[Sat May  5 22:53:21 2012] Detection parameters:
  Position = (292.5, 328.3) = 20 21 38.39 37 25 13.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 299.8 +/- 25.1
  Background counts = 151.2
  Rate = 0.006 +/- 0.0005

[Sat May  5 22:53:22 2012] Off-axis axis estimate = 2.21'
[Sun May  6 00:29:13 2012] Using EEF radius (= 7.53 ")to estimate initial spatial extent for simple fitting
[Sun May  6 00:29:13 2012] Initial guess for spatial extent in simple fitting = 7.53"
[Sun May  6 00:29:13 2012] source mask rpix=1.7, npix_max = 19, mask sum = 18, frac = 0.903
[Sun May  6 00:29:13 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 7.53"
[Sun May  6 01:15:36 2012] fullrun_mos2_xmm0550220101_pi300-10000_cl_pass0_src5.ximg exists
[Sun May  6 01:15:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550220101_pi300-10000_cl_pass0_src5.csv
[Sun May  6 01:15:36 2012] fullrun_mos2_xmm0550220101_pi300-10000_cl_pass0_src5_1.ximg exists
[Sun May  6 01:15:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550220101_pi300-10000_cl_pass0_src5.csv
[Sun May  6 01:15:36 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0550220101_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0550220101_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May  6 01:15:36 2012] fullrun_mos2_xmm0550220101_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Sun May  6 01:15:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550220101_pi300-10000_cl_pass0_tfrozen_src5.csv
[Sun May  6 01:15:36 2012] fullrun_mos2_xmm0550220101_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Sun May  6 01:15:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550220101_pi300-10000_cl_pass0_tfrozen_src5.csv
[Sun May  6 01:15:36 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0550220101_pi300-10000_cl_pass0_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0550220101_pi300-10000_cl_pass0_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May  6 01:15:53 2012] Spatial fit model total counts = 1135.370000, observed total counts = 948.000000
[Sun May  6 01:15:53 2012] Poor agreement between spatial fit and data for source 10
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun May  6 01:15:53 2012] Spatial fit model total counts = 1144.420000, observed total counts = 1099.000000
[Sun May  6 01:15:53 2012] Offset between fit and detection position for source 10 = 0.851764 pixels
[Sun May  6 01:15:53 2012] Warning, changing simple spatial fit ID from 5 to 11
[Sun May  6 01:15:53 2012] 1169.301000 total counts/ 1033.910000 bgd. counts: snr = 4.210643
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.851764 pixels
  Position = (292.1, 327.6) = 20 21 38.54 37 25 13.4
  Extent = 5.4 (3.6-8.8)", rotation angle = 0
  Source counts = 135.4 +/- 34.2
  Background counts = 1033.9
  Rate = 0.003 +/- 0.0007
[Sun May  6 01:15:53 2012] Vigneting correction estimate = 1.000000
[Sun May  6 01:15:53 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May  6 01:15:53 2012] Assessing source extent using major axis lower bound
[Sun May  6 01:15:53 2012] Source does appear to be extended
[Sun May  6 01:15:53 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May  6 01:15:53 2012] Source is confused with source 9
[Sun May  6 02:43:02 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun May  6 02:43:02 2012] Initial guess for spatial extent in simple fitting = 5.41"
[Sun May  6 02:43:02 2012] source mask rpix=1.2, npix_max = 12, mask sum = 9, frac = 0.740
[Sun May  6 02:43:02 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 5.41"
[Sun May  6 03:32:57 2012] fullrun_mos2_xmm0550220101_pi300-10000_cl_pass1_src5.ximg exists
[Sun May  6 03:32:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550220101_pi300-10000_cl_pass1_src5.csv
[Sun May  6 03:32:57 2012] fullrun_mos2_xmm0550220101_pi300-10000_cl_pass1_src5_1.ximg exists
[Sun May  6 03:32:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550220101_pi300-10000_cl_pass1_src5.csv
[Sun May  6 03:32:57 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0550220101_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0550220101_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May  6 03:32:57 2012] fullrun_mos2_xmm0550220101_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Sun May  6 03:32:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550220101_pi300-10000_cl_pass1_tfrozen_src5.csv
[Sun May  6 03:32:57 2012] fullrun_mos2_xmm0550220101_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Sun May  6 03:32:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550220101_pi300-10000_cl_pass1_tfrozen_src5.csv
[Sun May  6 03:32:57 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0550220101_pi300-10000_cl_pass1_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0550220101_pi300-10000_cl_pass1_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May  6 03:33:13 2012] Warning, spatial fit 5 centroid is now closest to src. 9
[Sun May  6 03:33:13 2012] Spatial fit model total counts = 1143.150000, observed total counts = 1099.000000
[Sun May  6 03:33:13 2012] Offset between fit and detection position for source 10 = 0.043371 pixels
[Sun May  6 03:33:13 2012] Warning, changing simple spatial fit ID from 5 to 10
[Sun May  6 03:33:13 2012] 1167.702000 total counts/ 1032.930000 bgd. counts: snr = 4.193380
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.043371 pixels
  Position = (292.0, 327.6) = 20 21 38.55 37 25 13.5
  Extent = 5.4 (4.1-8.1)", rotation angle = 0
  Source counts = 134.8 +/- 34.2
  Background counts = 1032.9
  Rate = 0.003 +/- 0.0007
[Sun May  6 03:33:13 2012] Vigneting correction estimate = 1.000000
[Sun May  6 03:33:13 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May  6 03:33:13 2012] Assessing source extent using major axis lower bound
[Sun May  6 03:33:13 2012] Source does appear to be extended
[Sun May  6 03:33:13 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May  6 05:20:14 2012] XMMSAS src. selection expression = ellipse(25358.540000, 28451.534000, 326.947209, 326.947209, 0.000000, X, Y)
[Sun May  6 05:20:14 2012] Writing source region out to fullrun_mos2_xmm0550220101_pi300-10000_pass1_cl_src10_src.reg
[Sun May  6 05:20:14 2012] Extracting stamp from image fullrun_mos2_xmm0550220101_pi300-10000_cl_sm2.00.img.gz, (273, 309) - (311, 346)
[Sun May  6 05:20:14 2012] XMMSAS bgd. selection expression = annulus(25358.540000, 28451.534000, 544.912016, 1089.824031, X, Y) && !ellipse(24884.758000, 29617.166000, 1175.368034, 1175.368034, 0.000000, X, Y) && !ellipse(24899.798737, 28837.942627, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23655.004000, 30267.342000, 1320.520038, 1320.520038, 0.000000, X, Y)
[Sun May  6 05:20:14 2012] Writing fullrun_mos2_xmm0550220101_pi300-10000_pass1_cl_src10.gif
[Sun May  6 05:22:09 2012] Mean detx,y = (-805.65, -3338.34) 
[Sun May  6 05:22:12 2012] Setting backscal keywords in source and bgd. spectrum
[Sun May  6 05:22:20 2012] Binned source spectrum to 10 counts/bin
[Sun May  6 05:22:21 2012] Setting source spectrum file to fullrun_mos2_xmm0550220101_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Sun May  6 05:22:21 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0550220101_pi300-10000_pass1_cl_src10_bgd.pi.gz
[Sun May  6 06:34:46 2012] Updating aperture counts using extracted products
[Sun May  6 06:34:46 2012] Error reading totcts from fullrun_mos2_xmm0550220101_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Sun May  6 06:34:47 2012] Calculating source flux in energy range 0.30-8.00
[Sun May  6 06:34:47 2012] Using photon index=1.80, rate=0.00295, arf fullrun_mos2_xmm0550220101_pi300-10000_pass1_cl_src10.arf
[Sun May  6 06:34:47 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun May  6 06:34:47 2012] Updating source flux to 3.9e-14
[Sun May  6 06:37:43 2012] Flag p found in src. 10 procflags, skipping spectral fitting
[Sun May  6 06:37:43 2012] Flag c found in src. 10 procflags, skipping spectral fitting