[Sat May  5 22:52:46 2012] Detection parameters:
  Position = (386.9, 220.0) = 20 21 3.94 37 17 24.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 125.9 +/- 20.9
  Background counts = 140.0
  Rate = 0.002 +/- 0.0003

[Sat May  5 22:52:46 2012] Off-axis axis estimate = 8.57'
[Sat May  5 23:47:12 2012] Using EEF radius (= 10.71 ")to estimate initial spatial extent for simple fitting
[Sat May  5 23:47:12 2012] Initial guess for spatial extent in simple fitting = 10.71"
[Sat May  5 23:47:12 2012] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.025
[Sat May  5 23:47:12 2012] Giving source the simple spatial ID 11 for pass 0, mean size = 10.71"
[Sun May  6 00:29:13 2012] fullrun_mos1_xmm0550220101_pi300-10000_cl_pass0_src11.ximg exists
[Sun May  6 00:29:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0550220101_pi300-10000_cl_pass0_src11.csv
[Sun May  6 00:29:13 2012] fullrun_mos1_xmm0550220101_pi300-10000_cl_pass0_src11_1.ximg exists
[Sun May  6 00:29:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0550220101_pi300-10000_cl_pass0_src11.csv
[Sun May  6 00:29:13 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0550220101_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0550220101_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May  6 00:29:13 2012] fullrun_mos1_xmm0550220101_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Sun May  6 00:29:13 2012] fullrun_mos1_xmm0550220101_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Sun May  6 00:29:13 2012] Fit fullrun_mos1_xmm0550220101_pi300-10000_cl_pass0_tfrozen_src11 appears to have run properly
[Sun May  6 01:15:47 2012] Warning: source 11 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 11 at 14.666775 pixels away
[Sun May  6 01:15:47 2012] Vigneting correction estimate = 1.000000
[Sun May  6 01:15:47 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May  6 01:15:47 2012] Assessing source extent using major
[Sun May  6 01:15:47 2012] Source does appear to be extended
[Sun May  6 01:15:47 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May  6 02:00:27 2012] Using EEF radius (= 10.71 ")to estimate initial spatial extent for simple fitting
[Sun May  6 02:00:27 2012] Initial guess for spatial extent in simple fitting = 10.71"
[Sun May  6 02:00:27 2012] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.025
[Sun May  6 02:00:27 2012] Giving source the simple spatial ID 11 for pass 1, mean size = 10.71"
[Sun May  6 02:43:02 2012] fullrun_mos1_xmm0550220101_pi300-10000_cl_pass1_src11.ximg exists
[Sun May  6 02:43:02 2012] fullrun_mos1_xmm0550220101_pi300-10000_cl_pass1_src11_1.ximg exists
[Sun May  6 02:43:02 2012] Fit fullrun_mos1_xmm0550220101_pi300-10000_cl_pass1_src11 appears to have run properly
[Sun May  6 02:43:02 2012] fullrun_mos1_xmm0550220101_pi300-10000_cl_pass1_tfrozen_src11.ximg exists
[Sun May  6 02:43:02 2012] fullrun_mos1_xmm0550220101_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists
[Sun May  6 02:43:02 2012] Fit fullrun_mos1_xmm0550220101_pi300-10000_cl_pass1_tfrozen_src11 appears to have run properly
[Sun May  6 03:33:08 2012] Warning: source 11 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 11 at 14.666775 pixels away
[Sun May  6 03:33:08 2012] Vigneting correction estimate = 1.000000
[Sun May  6 03:33:08 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May  6 03:33:08 2012] Assessing source extent using major
[Sun May  6 03:33:08 2012] Source does appear to be extended
[Sun May  6 03:33:08 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May  6 04:23:30 2012] XMMSAS src. selection expression = ellipse(33616.121857, 19094.470978, 652.500000, 652.500000, 0.000000, X, Y)
[Sun May  6 04:23:30 2012] Writing source region out to fullrun_mos1_xmm0550220101_pi300-10000_pass1_cl_src11_src.reg
[Sun May  6 04:23:30 2012] Extracting stamp from image fullrun_mos1_xmm0550220101_pi300-10000_cl_sm2.00.img.gz, (349, 183) - (424, 258)
[Sun May  6 04:23:30 2012] XMMSAS bgd. selection expression = annulus(33616.121857, 19094.470978, 1087.500000, 2175.000000, X, Y)
[Sun May  6 04:23:30 2012] Writing fullrun_mos1_xmm0550220101_pi300-10000_pass1_cl_src11.gif
[Sun May  6 04:29:31 2012] Mean detx,y = (-467.94, -11616.45) 
[Sun May  6 04:29:33 2012] Setting backscal keywords in source and bgd. spectrum
[Sun May  6 04:30:16 2012] Binned source spectrum to 10 counts/bin
[Sun May  6 04:30:17 2012] Setting source spectrum file to fullrun_mos1_xmm0550220101_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Sun May  6 04:30:17 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0550220101_pi300-10000_pass1_cl_src11_bgd.pi.gz
[Sun May  6 05:19:43 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun May  6 05:19:43 2012] rmf not generated due to insufficient counts
[Sun May  6 06:34:45 2012] Updating aperture counts using extracted products
[Sun May  6 06:34:45 2012] Error reading totcts from fullrun_mos1_xmm0550220101_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Sun May  6 06:34:46 2012] Calculating source flux in energy range 0.30-8.00
[Sun May  6 06:34:46 2012] Using photon index=1.80, rate=0.00206, arf fullrun_mos1_xmm0550220101_pi300-10000_pass1_cl_src11.arf
[Sun May  6 06:34:46 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun May  6 06:34:46 2012] Updating source flux to 4.6e-14
[Sun May  6 06:34:49 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting