[Fri May 25 10:20:16 2012] Detection parameters:
  Position = (440.4, 259.1) = 21 10 44.05 44 44 53.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 186.2 +/- 18.2
  Background counts = 21.7
  Rate = 0.01 +/- 0.001

[Fri May 25 10:20:17 2012] Off-axis axis estimate = 10.68'
[Fri May 25 10:57:08 2012] Using EEF radius (= 11.77 ")to estimate initial spatial extent for simple fitting
[Fri May 25 10:57:08 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri May 25 10:57:08 2012] Initial guess for spatial extent in simple fitting = 11.77"
[Fri May 25 10:57:08 2012] source mask rpix=2.7, npix_max = 41, mask sum = 42, frac = 1.022
[Fri May 25 10:57:08 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 11.77"
[Fri May 25 11:09:22 2012] fullrun_mos2_xmm0550190501_pi300-10000_cl_pass0_src1.ximg exists
[Fri May 25 11:09:22 2012] fullrun_mos2_xmm0550190501_pi300-10000_cl_pass0_src1_1.ximg exists
[Fri May 25 11:09:22 2012] Fit fullrun_mos2_xmm0550190501_pi300-10000_cl_pass0_src1 appears to have run properly
[Fri May 25 11:09:22 2012] fullrun_mos2_xmm0550190501_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Fri May 25 11:09:22 2012] fullrun_mos2_xmm0550190501_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Fri May 25 11:09:22 2012] Fit fullrun_mos2_xmm0550190501_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Fri May 25 11:09:31 2012] Spatial fit model total counts = 641.989000, observed total counts = 609.000000
[Fri May 25 11:09:31 2012] Offset between fit and detection position for source 4 = 0.305602 pixels
[Fri May 25 11:09:31 2012] 640.134000 total counts/ 460.989000 bgd. counts: snr = 8.343714
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.305602 pixels
  Position = (440.1, 259.2) = 21 10 44.17 44 44 55.5
  Extent = 9.2" x 6.1", rotation angle = 86
  Source counts = 179.1 +/- 25.3
  Background counts = 461.0
  Rate = 0.006 +/- 0.0009
[Fri May 25 11:09:31 2012] Vigneting correction estimate = 1.000000
[Fri May 25 11:09:31 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 25 11:09:31 2012] Assessing source extent using major
[Fri May 25 11:09:31 2012] Source does appear to be extended
[Fri May 25 11:09:31 2012] Computing asymmetry using major and minor axis, asym = 1.51
[Fri May 25 11:09:31 2012] Source is asymmetric
[Fri May 25 11:38:25 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri May 25 11:38:25 2012] Initial guess for spatial extent in simple fitting = 7.62"
[Fri May 25 11:38:25 2012] source mask rpix=1.8, npix_max = 20, mask sum = 16, frac = 0.790
[Fri May 25 11:38:25 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 7.62"
[Fri May 25 11:48:31 2012] fullrun_mos2_xmm0550190501_pi300-10000_cl_pass1_src1.ximg exists
[Fri May 25 11:48:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550190501_pi300-10000_cl_pass1_src1.csv
[Fri May 25 11:48:31 2012] fullrun_mos2_xmm0550190501_pi300-10000_cl_pass1_src1_1.ximg exists
[Fri May 25 11:48:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550190501_pi300-10000_cl_pass1_src1.csv
[Fri May 25 11:48:31 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0550190501_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0550190501_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 25 11:48:31 2012] fullrun_mos2_xmm0550190501_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Fri May 25 11:48:31 2012] fullrun_mos2_xmm0550190501_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Fri May 25 11:48:31 2012] Fit fullrun_mos2_xmm0550190501_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Fri May 25 11:48:38 2012] Spatial fit model total counts = 405.001000, observed total counts = 405.000000
[Fri May 25 11:48:38 2012] Offset between fit and detection position for source 4 = 0.043489 pixels
[Fri May 25 11:48:38 2012] 404.518000 total counts/ 270.169000 bgd. counts: snr = 8.173662
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.043489 pixels
  Position = (440.1, 259.3) = 21 10 44.17 44 44 55.7
  Extent = 6.4 (5.5-7.8)", rotation angle = 0
  Source counts = 134.3 +/- 20.1
  Background counts = 270.2
  Rate = 0.005 +/- 0.0007
[Fri May 25 11:48:38 2012] Vigneting correction estimate = 1.000000
[Fri May 25 11:48:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 25 11:48:38 2012] Assessing source extent using major axis lower bound
[Fri May 25 11:48:38 2012] Source does appear to be extended
[Fri May 25 11:48:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 25 12:17:43 2012] XMMSAS src. selection expression = ellipse(38243.666640, 22507.379800, 386.250011, 386.250011, 0.000000, X, Y)
[Fri May 25 12:17:43 2012] Writing source region out to fullrun_mos2_xmm0550190501_pi300-10000_pass1_cl_src4_src.reg
[Fri May 25 12:17:43 2012] Extracting stamp from image fullrun_mos2_xmm0550190501_pi300-10000_cl_sm2.00.img.gz, (418, 237) - (462, 281)
[Fri May 25 12:17:43 2012] XMMSAS bgd. selection expression = annulus(38243.666640, 22507.379800, 643.750019, 1287.500037, X, Y)
[Fri May 25 12:17:43 2012] Writing fullrun_mos2_xmm0550190501_pi300-10000_pass1_cl_src4.gif
[Fri May 25 12:17:46 2012] Mean detx,y = (-9634.06, 5159.73) 
[Fri May 25 12:17:47 2012] Setting backscal keywords in source and bgd. spectrum
[Fri May 25 12:17:54 2012] Binned source spectrum to 10 counts/bin
[Fri May 25 12:17:54 2012] Setting source spectrum file to fullrun_mos2_xmm0550190501_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Fri May 25 12:17:54 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0550190501_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Fri May 25 12:28:56 2012] Updating aperture counts using extracted products
[Fri May 25 12:28:56 2012] Error reading totcts from fullrun_mos2_xmm0550190501_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Fri May 25 12:28:56 2012] Calculating source flux in energy range 0.30-8.00
[Fri May 25 12:28:56 2012] Using photon index=1.80, rate=0.00487, arf fullrun_mos2_xmm0550190501_pi300-10000_pass1_cl_src4.arf
[Fri May 25 12:28:56 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri May 25 12:28:56 2012] Updating source flux to 1.2e-13
[Fri May 25 12:29:23 2012] Reading fit data from xmm0550190501/analysis//spectral/fullrun_mos2_xmm0550190501_pi300-10000_pass1_cl_src4_pl.csv
[Fri May 25 12:29:23 2012] Spectral fit parameter nH value = 9.84823e+20
[Fri May 25 12:29:23 2012] Spectral fit parameter PhoIndex value = 1.15893
[Fri May 25 12:29:23 2012] Failed to get F(0.3-8.0) from xmm0550190501/analysis//spectral/fullrun_mos2_xmm0550190501_pi300-10000_pass1_cl_src4_pl.csv, possibly due to different flux energy range selected
[Fri May 25 12:29:23 2012] Calculating source flux in energy range 0.30-8.00
[Fri May 25 12:29:23 2012] Using Nh = 9.8e+20, photon index=1.16, rate=0.00487, arf fullrun_mos2_xmm0550190501_pi300-10000_pass1_cl_src4.arf
[Fri May 25 12:29:23 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri May 25 12:29:23 2012] Updating source flux to 1.8e-13