[Sun Sep  2 19:22:10 2012] Detection parameters:
  Position = (203.2, 399.2) = 18 17 25.30 -25 47 54.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 59.7 +/- 10.2
  Background counts = 7.9
  Rate = 0.004 +/- 0.0007

[Sun Sep  2 19:22:10 2012] Off-axis axis estimate = 10.05'
[Sun Sep  2 19:42:24 2012] Using EEF radius (= 11.45 ")to estimate initial spatial extent for simple fitting
[Sun Sep  2 19:42:24 2012] Initial guess for spatial extent in simple fitting = 11.45"
[Sun Sep  2 19:42:24 2012] source mask rpix=2.6, npix_max = 39, mask sum = 36, frac = 0.917
[Sun Sep  2 19:42:24 2012] Giving source the simple spatial ID 4 for pass 0, mean size = 11.45"
[Sun Sep  2 19:54:35 2012] fullrun_mos1_xmm0550190201_pi300-10000_cl_pass0_src4.ximg exists
[Sun Sep  2 19:54:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0550190201_pi300-10000_cl_pass0_src4.csv
[Sun Sep  2 19:54:35 2012] fullrun_mos1_xmm0550190201_pi300-10000_cl_pass0_src4_1.ximg exists
[Sun Sep  2 19:54:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0550190201_pi300-10000_cl_pass0_src4.csv
[Sun Sep  2 19:54:35 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0550190201_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0550190201_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Sep  2 19:54:35 2012] fullrun_mos1_xmm0550190201_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Sun Sep  2 19:54:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0550190201_pi300-10000_cl_pass0_tfrozen_src4.csv
[Sun Sep  2 19:54:35 2012] fullrun_mos1_xmm0550190201_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Sun Sep  2 19:54:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0550190201_pi300-10000_cl_pass0_tfrozen_src4.csv
[Sun Sep  2 19:54:35 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0550190201_pi300-10000_cl_pass0_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0550190201_pi300-10000_cl_pass0_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Sep  2 20:09:26 2012] Warning: source 4 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 10 at 14.482824 pixels away
[Sun Sep  2 20:09:26 2012] Vigneting correction estimate = 1.000000
[Sun Sep  2 20:09:26 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Sep  2 20:09:26 2012] Assessing source extent using major
[Sun Sep  2 20:09:26 2012] Source does appear to be extended
[Sun Sep  2 20:09:26 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Sep  2 20:23:01 2012] Using EEF radius (= 11.45 ")to estimate initial spatial extent for simple fitting
[Sun Sep  2 20:23:01 2012] Initial guess for spatial extent in simple fitting = 11.45"
[Sun Sep  2 20:23:01 2012] source mask rpix=2.6, npix_max = 39, mask sum = 36, frac = 0.917
[Sun Sep  2 20:23:01 2012] Giving source the simple spatial ID 4 for pass 1, mean size = 11.45"
[Sun Sep  2 20:34:19 2012] fullrun_mos1_xmm0550190201_pi300-10000_cl_pass1_src4.ximg exists
[Sun Sep  2 20:34:19 2012] fullrun_mos1_xmm0550190201_pi300-10000_cl_pass1_src4_1.ximg exists
[Sun Sep  2 20:34:19 2012] Fit fullrun_mos1_xmm0550190201_pi300-10000_cl_pass1_src4 appears to have run properly
[Sun Sep  2 20:34:19 2012] fullrun_mos1_xmm0550190201_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Sun Sep  2 20:34:19 2012] fullrun_mos1_xmm0550190201_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Sun Sep  2 20:34:19 2012] Fit fullrun_mos1_xmm0550190201_pi300-10000_cl_pass1_tfrozen_src4 appears to have run properly
[Sun Sep  2 20:49:38 2012] Spatial fit model total counts = 111.032000, observed total counts = 120.000000
[Sun Sep  2 20:49:38 2012] Offset between fit and detection position for source 10 = 0.381650 pixels
[Sun Sep  2 20:49:38 2012] 110.529700 total counts/ 73.389500 bgd. counts: snr = 4.335381
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.381650 pixels
  Position = (202.8, 399.1) = 18 17 25.43 -25 47 55.9
  Extent = 9.5" x 3.9", rotation angle = 346
  Source counts = 37.1 +/- 10.5
  Background counts = 73.4
  Rate = 0.003 +/- 0.0007
[Sun Sep  2 20:49:38 2012] Vigneting correction estimate = 1.000000
[Sun Sep  2 20:49:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Sep  2 20:49:38 2012] Assessing source extent using major
[Sun Sep  2 20:49:38 2012] Source does appear to be extended
[Sun Sep  2 20:49:38 2012] Computing asymmetry using major and minor axis, asym = 2.42
[Sun Sep  2 20:49:38 2012] Source is asymmetric
[Sun Sep  2 20:56:38 2012] XMMSAS src. selection expression = ellipse(17597.519826, 34673.801633, 567.701292, 234.786825, 345.914191, X, Y)
[Sun Sep  2 20:56:38 2012] Writing source region out to fullrun_mos1_xmm0550190201_pi300-10000_pass1_cl_src10_src.reg
[Sun Sep  2 20:56:38 2012] Extracting stamp from image fullrun_mos1_xmm0550190201_pi300-10000_cl_sm2.00.img.gz, (170, 366) - (235, 432)
[Sun Sep  2 20:56:38 2012] XMMSAS bgd. selection expression = annulus(17597.519826, 34673.801633, 946.168820, 1892.337640, X, Y)
[Sun Sep  2 20:56:38 2012] Writing fullrun_mos1_xmm0550190201_pi300-10000_pass1_cl_src10.gif
[Sun Sep  2 20:57:04 2012] Mean detx,y = (-9993.68, 7112.15) 
[Sun Sep  2 20:57:05 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Sep  2 20:57:18 2012] grppha failed
[Sun Sep  2 20:57:18 2012] Setting source spectrum file to fullrun_mos1_xmm0550190201_pi300-10000_pass1_cl_src10_src.pi.gz
[Sun Sep  2 20:57:18 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0550190201_pi300-10000_pass1_cl_src10_bgd.pi.gz
[Sun Sep  2 20:58:33 2012] Not generating rmf since there are only 37 counts
[Sun Sep  2 20:58:33 2012] rmf not generated due to insufficient counts
[Sun Sep  2 21:01:38 2012] Updating aperture counts using extracted products
[Sun Sep  2 21:01:38 2012] Error reading totcts from fullrun_mos1_xmm0550190201_pi300-10000_pass1_cl_src10_src.pi.gz
[Sun Sep  2 21:01:38 2012] No arf file for this source, not re-computing flux
[Sun Sep  2 21:01:39 2012] Source 10 has fewer than 100.000000 counts, skipping spectral fitting
[Sun Sep  2 21:01:40 2012] xmm0550190201/analysis//spectral/fullrun_mos1_xmm0550190201_pi300-10000_pass1_cl_src10_pl.csv not found, spectral fit skipped or did not complete