[Sat Jul 21 18:44:52 2012] Detection parameters:
  Position = (374.8, 190.2) = 18 17 20.33 -30 33 0.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1978.2 +/- 54.7
  Background counts = 69.9
  Rate = 0.08 +/- 0.002

[Sat Jul 21 18:44:53 2012] Off-axis axis estimate = 9.61'
[Sat Jul 21 19:12:52 2012] Using EEF radius (= 11.23 ")to estimate initial spatial extent for simple fitting
[Sat Jul 21 19:12:53 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Jul 21 19:12:53 2012] Initial guess for spatial extent in simple fitting = 11.23"
[Sat Jul 21 19:12:53 2012] source mask rpix=2.6, npix_max = 37, mask sum = 36, frac = 0.948
[Sat Jul 21 19:12:53 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 11.23"
[Sat Jul 21 19:36:43 2012] fullrun_mos2_xmm0550190101_pi300-10000_cl_pass0_src1.ximg exists
[Sat Jul 21 19:36:43 2012] fullrun_mos2_xmm0550190101_pi300-10000_cl_pass0_src1_1.ximg exists
[Sat Jul 21 19:36:43 2012] Fit fullrun_mos2_xmm0550190101_pi300-10000_cl_pass0_src1 appears to have run properly
[Sat Jul 21 19:36:43 2012] fullrun_mos2_xmm0550190101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sat Jul 21 19:36:43 2012] fullrun_mos2_xmm0550190101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sat Jul 21 19:36:43 2012] Fit fullrun_mos2_xmm0550190101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sat Jul 21 19:36:51 2012] Spatial fit model total counts = 1624.580000, observed total counts = 1602.000000
[Sat Jul 21 19:36:51 2012] Offset between fit and detection position for source 2 = 0.238374 pixels
[Sat Jul 21 19:36:51 2012] 1624.367000 total counts/ 659.641000 bgd. counts: snr = 37.562126
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.238374 pixels
  Position = (374.6, 190.1) = 18 17 20.41 -30 33 1.1
  Extent = 5.8 (5.4-6.1)", rotation angle = 0
  Source counts = 964.7 +/- 40.3
  Background counts = 659.6
  Rate = 0.05 +/- 0.002
[Sat Jul 21 19:36:51 2012] Vigneting correction estimate = 1.000000
[Sat Jul 21 19:36:51 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jul 21 19:36:51 2012] Assessing source extent using major axis lower bound
[Sat Jul 21 19:36:51 2012] Source does appear to be extended
[Sat Jul 21 19:36:51 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jul 21 20:01:30 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Jul 21 20:01:30 2012] Initial guess for spatial extent in simple fitting = 5.76"
[Sat Jul 21 20:01:30 2012] source mask rpix=1.3, npix_max = 13, mask sum = 12, frac = 0.903
[Sat Jul 21 20:01:30 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.76"
[Sat Jul 21 20:42:22 2012] fullrun_mos2_xmm0550190101_pi300-10000_cl_pass1_src1.ximg exists
[Sat Jul 21 20:42:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550190101_pi300-10000_cl_pass1_src1.csv
[Sat Jul 21 20:42:22 2012] fullrun_mos2_xmm0550190101_pi300-10000_cl_pass1_src1_1.ximg exists
[Sat Jul 21 20:42:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550190101_pi300-10000_cl_pass1_src1.csv
[Sat Jul 21 20:42:22 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0550190101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0550190101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul 21 20:42:22 2012] fullrun_mos2_xmm0550190101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sat Jul 21 20:42:22 2012] fullrun_mos2_xmm0550190101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sat Jul 21 20:42:22 2012] Fit fullrun_mos2_xmm0550190101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sat Jul 21 20:42:27 2012] Spatial fit model total counts = 1434.000000, observed total counts = 1434.000000
[Sat Jul 21 20:42:27 2012] Offset between fit and detection position for source 2 = 0.023094 pixels
[Sat Jul 21 20:42:27 2012] 1433.030000 total counts/ 529.596000 bgd. counts: snr = 39.257630
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.023094 pixels
  Position = (374.6, 190.1) = 18 17 20.41 -30 33 1.0
  Extent = 5.3 (4.9-5.6)", rotation angle = 0
  Source counts = 903.4 +/- 37.9
  Background counts = 529.6
  Rate = 0.05 +/- 0.002
[Sat Jul 21 20:42:27 2012] Vigneting correction estimate = 1.000000
[Sat Jul 21 20:42:27 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jul 21 20:42:27 2012] Assessing source extent using major axis lower bound
[Sat Jul 21 20:42:27 2012] Source does appear to be extended
[Sat Jul 21 20:42:27 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jul 21 21:22:30 2012] XMMSAS src. selection expression = ellipse(32540.459200, 16494.101000, 315.475809, 315.475809, 0.000000, X, Y)
[Sat Jul 21 21:22:30 2012] Writing source region out to fullrun_mos2_xmm0550190101_pi300-10000_pass1_cl_src2_src.reg
[Sat Jul 21 21:22:30 2012] Extracting stamp from image fullrun_mos2_xmm0550190101_pi300-10000_cl_sm2.00.img.gz, (356, 172) - (393, 208)
[Sat Jul 21 21:22:30 2012] XMMSAS bgd. selection expression = annulus(32540.459200, 16494.101000, 525.793015, 1051.586030, X, Y)
[Sat Jul 21 21:22:30 2012] Writing fullrun_mos2_xmm0550190101_pi300-10000_pass1_cl_src2.gif
[Sat Jul 21 21:22:33 2012] Mean detx,y = (8348.47, 7395.97) 
[Sat Jul 21 21:22:34 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jul 21 21:22:46 2012] Binned source spectrum to 10 counts/bin
[Sat Jul 21 21:22:46 2012] Setting source spectrum file to fullrun_mos2_xmm0550190101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Sat Jul 21 21:22:46 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0550190101_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Sat Jul 21 21:42:30 2012] Updating aperture counts using extracted products
[Sat Jul 21 21:42:30 2012] Error reading totcts from fullrun_mos2_xmm0550190101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Sat Jul 21 21:42:30 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jul 21 21:42:30 2012] Using photon index=1.80, rate=0.0504, arf fullrun_mos2_xmm0550190101_pi300-10000_pass1_cl_src2.arf
[Sat Jul 21 21:42:30 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jul 21 21:42:30 2012] Updating source flux to 1.4e-12
[Sat Jul 21 21:43:31 2012] Reading fit data from xmm0550190101/analysis//spectral/fullrun_mos2_xmm0550190101_pi300-10000_pass1_cl_src2_pl.csv
[Sat Jul 21 21:43:31 2012] Spectral fit parameter nH value = 1.83586e+21
[Sat Jul 21 21:43:31 2012] Spectral fit parameter PhoIndex value = 1.72648
[Sat Jul 21 21:43:31 2012] Failed to get F(0.3-8.0) from xmm0550190101/analysis//spectral/fullrun_mos2_xmm0550190101_pi300-10000_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Sat Jul 21 21:43:31 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jul 21 21:43:31 2012] Using Nh = 1.8e+21, photon index=1.73, rate=0.0504, arf fullrun_mos2_xmm0550190101_pi300-10000_pass1_cl_src2.arf
[Sat Jul 21 21:43:31 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jul 21 21:43:31 2012] Updating source flux to 1.6e-12