[Tue Feb 21 10:51:23 2012] Detection parameters:
  Position = (336.8, 364.1) = 11 58 0.13 -62 31 49.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 99.2 +/- 18.8
  Background counts = 112.7
  Rate = 0.002 +/- 0.0005

[Tue Feb 21 10:51:24 2012] Off-axis axis estimate = 5.51'
[Tue Feb 21 10:58:13 2012] Using EEF radius (= 9.19 ")to estimate initial spatial extent for simple fitting
[Tue Feb 21 10:58:13 2012] Initial guess for spatial extent in simple fitting = 9.19"
[Tue Feb 21 10:58:13 2012] source mask rpix=2.1, npix_max = 27, mask sum = 30, frac = 1.100
[Tue Feb 21 10:58:13 2012] Giving source the simple spatial ID 19 for pass 0, mean size = 9.19"
[Tue Feb 21 12:24:36 2012] fullrun_pn_xmm0550170101_pi300-10000_cl_pass0_src19.ximg exists
[Tue Feb 21 12:24:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0550170101_pi300-10000_cl_pass0_src19.csv
[Tue Feb 21 12:24:36 2012] fullrun_pn_xmm0550170101_pi300-10000_cl_pass0_src19_1.ximg exists
[Tue Feb 21 12:24:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0550170101_pi300-10000_cl_pass0_src19.csv
[Tue Feb 21 12:24:36 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0550170101_pi300-10000_cl_pass0_src19_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0550170101_pi300-10000_cl_pass0_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Feb 21 12:24:37 2012] fullrun_pn_xmm0550170101_pi300-10000_cl_pass0_tfrozen_src19.ximg exists
[Tue Feb 21 12:24:37 2012] fullrun_pn_xmm0550170101_pi300-10000_cl_pass0_tfrozen_src19_1.ximg exists
[Tue Feb 21 12:24:37 2012] Fit fullrun_pn_xmm0550170101_pi300-10000_cl_pass0_tfrozen_src19 appears to have run properly
[Tue Feb 21 13:45:04 2012] Source 20 is offset by 5.430867 and 7.552295 pixels which is larger than
2 X fitted extent = 1.055807 x 1.055807, not incorporating fit results
[Tue Feb 21 13:45:04 2012] Vigneting correction estimate = 1.000000
[Tue Feb 21 13:45:04 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Feb 21 13:45:04 2012] Assessing source extent using major
[Tue Feb 21 13:45:04 2012] Source does appear to be extended
[Tue Feb 21 13:45:04 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Feb 21 13:45:30 2012] Using EEF radius (= 9.19 ")to estimate initial spatial extent for simple fitting
[Tue Feb 21 13:45:30 2012] Initial guess for spatial extent in simple fitting = 9.19"
[Tue Feb 21 13:45:30 2012] source mask rpix=2.1, npix_max = 27, mask sum = 30, frac = 1.100
[Tue Feb 21 13:45:30 2012] Giving source the simple spatial ID 19 for pass 1, mean size = 9.19"
[Tue Feb 21 15:05:50 2012] fullrun_pn_xmm0550170101_pi300-10000_cl_pass1_src19.ximg exists
[Tue Feb 21 15:05:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0550170101_pi300-10000_cl_pass1_src19.csv
[Tue Feb 21 15:05:50 2012] fullrun_pn_xmm0550170101_pi300-10000_cl_pass1_src19_1.ximg exists
[Tue Feb 21 15:05:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0550170101_pi300-10000_cl_pass1_src19.csv
[Tue Feb 21 15:05:50 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0550170101_pi300-10000_cl_pass1_src19_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0550170101_pi300-10000_cl_pass1_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Feb 21 15:05:50 2012] fullrun_pn_xmm0550170101_pi300-10000_cl_pass1_tfrozen_src19.ximg exists
[Tue Feb 21 15:05:50 2012] fullrun_pn_xmm0550170101_pi300-10000_cl_pass1_tfrozen_src19_1.ximg exists
[Tue Feb 21 15:05:50 2012] Fit fullrun_pn_xmm0550170101_pi300-10000_cl_pass1_tfrozen_src19 appears to have run properly
[Tue Feb 21 16:14:45 2012] Spatial fit model total counts = 1013.680000, observed total counts = 1010.000000
[Tue Feb 21 16:14:45 2012] Offset between fit and detection position for source 20 = 0.561990 pixels
[Tue Feb 21 16:14:45 2012] 1022.597000 total counts/ 888.387000 bgd. counts: snr = 4.502812
Spatial fit parameters:
  Offset between fit and detection position for source 20 = 0.561990 pixels
  Position = (336.5, 363.6) = 11 58 0.31 -62 31 50.4
  Extent = 9.1 (6.4-11.9)", rotation angle = 0
  Source counts = 134.2 +/- 32.0
  Background counts = 888.4
  Rate = 0.003 +/- 0.0007
[Tue Feb 21 16:14:45 2012] Vigneting correction estimate = 1.000000
[Tue Feb 21 16:14:45 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Feb 21 16:14:45 2012] Assessing source extent using major axis lower bound
[Tue Feb 21 16:14:45 2012] Source does appear to be extended
[Tue Feb 21 16:14:45 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Feb 21 16:14:45 2012] Source is confused with source 17
[Tue Feb 21 16:15:12 2012] XMMSAS src. selection expression = ellipse(29227.747600, 31586.926200, 548.638816, 548.638816, 0.000000, X, Y)
[Tue Feb 21 16:15:12 2012] Writing source region out to fullrun_pn_xmm0550170101_pi300-10000_pass1_cl_src20_src.reg
[Tue Feb 21 16:15:12 2012] Extracting stamp from image fullrun_pn_xmm0550170101_pi300-10000_cl_sm2.00.img.gz, (305, 332) - (368, 395)
[Tue Feb 21 16:15:12 2012] XMMSAS bgd. selection expression = annulus(29227.747600, 31586.926200, 914.398026, 1828.796053, X, Y) && !ellipse(30525.445000, 30480.643200, 386.278411, 386.278411, 0.000000, X, Y) && !ellipse(28170.502200, 33124.984200, 426.729612, 426.729612, 0.000000, X, Y) && !ellipse(28111.421800, 33114.874400, 853.456025, 454.447213, 348.577000, X, Y) && !ellipse(29984.072000, 32227.184000, 1532.168044, 1532.168044, 0.000000, X, Y) && !ellipse(30864.722400, 31357.123747, 1521.176044, 584.343217, 36.863200, X, Y) && !ellipse(26129.206000, 30167.818800, 1307.968038, 1307.968038, 0.000000, X, Y) && !ellipse(32218.514000, 29642.450800, 2329.240067, 723.863221, 43.461800, X, Y)
[Tue Feb 21 16:15:12 2012] Writing fullrun_pn_xmm0550170101_pi300-10000_pass1_cl_src20.gif
[Tue Feb 21 16:42:11 2012] Mean detx,y = (5543.59, 1226.66) 
[Tue Feb 21 16:42:17 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Feb 21 16:42:46 2012] Binned source spectrum to 10 counts/bin
[Tue Feb 21 16:42:46 2012] Setting source spectrum file to fullrun_pn_xmm0550170101_pi300-10000_pass1_cl_src20_src_b10.pi.gz
[Tue Feb 21 16:42:46 2012] Setting bgd. spectrum file to fullrun_pn_xmm0550170101_pi300-10000_pass1_cl_src20_bgd.pi.gz
[Tue Feb 21 20:10:01 2012] Updating aperture counts using extracted products
[Tue Feb 21 20:10:01 2012] Error reading totcts from fullrun_pn_xmm0550170101_pi300-10000_pass1_cl_src20_src_b10.pi.gz
[Tue Feb 21 20:10:03 2012] Calculating source flux in energy range 0.30-8.00
[Tue Feb 21 20:10:03 2012] Using photon index=1.80, rate=0.00305, arf fullrun_pn_xmm0550170101_pi300-10000_pass1_cl_src20.arf
[Tue Feb 21 20:10:03 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Feb 21 20:10:03 2012] Updating source flux to 1e-14
[Tue Feb 21 20:13:32 2012] Flag b found in src. 20 procflags, skipping spectral fitting
[Tue Feb 21 20:13:32 2012] Flag c found in src. 20 procflags, skipping spectral fitting