[Tue Feb 21 10:52:03 2012] Detection parameters:
  Position = (161.5, 283.8) = 11 59 50.61 -62 37 35.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 95.1 +/- 17.4
  Background counts = 79.5
  Rate = 0.002 +/- 0.0003

[Tue Feb 21 10:52:03 2012] Off-axis axis estimate = 9.98'
[Tue Feb 21 12:24:37 2012] Using EEF radius (= 11.42 ")to estimate initial spatial extent for simple fitting
[Tue Feb 21 12:24:37 2012] Initial guess for spatial extent in simple fitting = 11.42"
[Tue Feb 21 12:24:37 2012] source mask rpix=2.6, npix_max = 39, mask sum = 42, frac = 1.075
[Tue Feb 21 12:24:37 2012] Giving source the simple spatial ID 11 for pass 0, mean size = 11.42"
[Tue Feb 21 12:57:26 2012] fullrun_mos1_xmm0550170101_pi300-10000_cl_pass0_src11.ximg exists
[Tue Feb 21 12:57:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0550170101_pi300-10000_cl_pass0_src11.csv
[Tue Feb 21 12:57:26 2012] fullrun_mos1_xmm0550170101_pi300-10000_cl_pass0_src11_1.ximg exists
[Tue Feb 21 12:57:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0550170101_pi300-10000_cl_pass0_src11.csv
[Tue Feb 21 12:57:26 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0550170101_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0550170101_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Feb 21 12:57:26 2012] fullrun_mos1_xmm0550170101_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Tue Feb 21 12:57:26 2012] fullrun_mos1_xmm0550170101_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Tue Feb 21 12:57:26 2012] Fit fullrun_mos1_xmm0550170101_pi300-10000_cl_pass0_tfrozen_src11 appears to have run properly
[Tue Feb 21 13:45:08 2012] Warning: source 11 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 13 at 14.659074 pixels away
[Tue Feb 21 13:45:08 2012] Vigneting correction estimate = 1.000000
[Tue Feb 21 13:45:08 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Feb 21 13:45:08 2012] Assessing source extent using major
[Tue Feb 21 13:45:08 2012] Source does appear to be extended
[Tue Feb 21 13:45:08 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Feb 21 15:05:51 2012] Using EEF radius (= 11.42 ")to estimate initial spatial extent for simple fitting
[Tue Feb 21 15:05:51 2012] Initial guess for spatial extent in simple fitting = 11.42"
[Tue Feb 21 15:05:51 2012] source mask rpix=2.6, npix_max = 39, mask sum = 42, frac = 1.075
[Tue Feb 21 15:05:51 2012] Giving source the simple spatial ID 10 for pass 1, mean size = 11.42"
[Tue Feb 21 15:30:56 2012] fullrun_mos1_xmm0550170101_pi300-10000_cl_pass1_src10.ximg exists
[Tue Feb 21 15:30:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0550170101_pi300-10000_cl_pass1_src10.csv
[Tue Feb 21 15:30:56 2012] fullrun_mos1_xmm0550170101_pi300-10000_cl_pass1_src10_1.ximg exists
[Tue Feb 21 15:30:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0550170101_pi300-10000_cl_pass1_src10.csv
[Tue Feb 21 15:30:56 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0550170101_pi300-10000_cl_pass1_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0550170101_pi300-10000_cl_pass1_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Feb 21 15:30:56 2012] fullrun_mos1_xmm0550170101_pi300-10000_cl_pass1_tfrozen_src10.ximg exists
[Tue Feb 21 15:30:56 2012] fullrun_mos1_xmm0550170101_pi300-10000_cl_pass1_tfrozen_src10_1.ximg exists
[Tue Feb 21 15:30:56 2012] Fit fullrun_mos1_xmm0550170101_pi300-10000_cl_pass1_tfrozen_src10 appears to have run properly
[Tue Feb 21 16:14:50 2012] Spatial fit model total counts = 356.996000, observed total counts = 357.000000
[Tue Feb 21 16:14:50 2012] Offset between fit and detection position for source 13 = 0.140016 pixels
[Tue Feb 21 16:14:50 2012] 355.646700 total counts/ 301.614000 bgd. counts: snr = 3.111221
Spatial fit parameters:
  Offset between fit and detection position for source 13 = 0.140016 pixels
  Position = (161.4, 283.9) = 11 59 50.66 -62 37 35.7
  Extent = 5.4 (3.8-8.8)", rotation angle = 0
  Source counts = 54.0 +/- 18.9
  Background counts = 301.6
  Rate = 0.001 +/- 0.0004
[Tue Feb 21 16:14:50 2012] Vigneting correction estimate = 1.000000
[Tue Feb 21 16:14:50 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Feb 21 16:14:50 2012] Assessing source extent using major axis lower bound
[Tue Feb 21 16:14:50 2012] Source does appear to be extended
[Tue Feb 21 16:14:50 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Feb 21 19:06:05 2012] XMMSAS src. selection expression = ellipse(13996.325600, 24650.546840, 324.966009, 324.966009, 0.000000, X, Y)
[Tue Feb 21 19:06:05 2012] Writing source region out to fullrun_mos1_xmm0550170101_pi300-10000_pass1_cl_src13_src.reg
[Tue Feb 21 19:06:05 2012] Extracting stamp from image fullrun_mos1_xmm0550170101_pi300-10000_cl_sm2.00.img.gz, (143, 265) - (180, 303)
[Tue Feb 21 19:06:05 2012] XMMSAS bgd. selection expression = annulus(13996.325600, 24650.546840, 541.610016, 1083.220031, X, Y)
[Tue Feb 21 19:06:05 2012] Writing fullrun_mos1_xmm0550170101_pi300-10000_pass1_cl_src13.gif
[Tue Feb 21 19:10:41 2012] Mean detx,y = (7973.63, -8857.28) 
[Tue Feb 21 19:10:43 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Feb 21 19:10:57 2012] Binned source spectrum to 10 counts/bin
[Tue Feb 21 19:10:58 2012] Setting source spectrum file to fullrun_mos1_xmm0550170101_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Tue Feb 21 19:10:58 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0550170101_pi300-10000_pass1_cl_src13_bgd.pi.gz
[Tue Feb 21 19:29:01 2012] Not generating rmf since there are only 54 counts
[Tue Feb 21 19:29:01 2012] rmf not generated due to insufficient counts
[Tue Feb 21 20:10:05 2012] Updating aperture counts using extracted products
[Tue Feb 21 20:10:05 2012] Error reading totcts from fullrun_mos1_xmm0550170101_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Tue Feb 21 20:10:05 2012] Calculating source flux in energy range 0.30-8.00
[Tue Feb 21 20:10:05 2012] Using photon index=1.80, rate=0.00111, arf fullrun_mos1_xmm0550170101_pi300-10000_pass1_cl_src13.arf
[Tue Feb 21 20:10:05 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Feb 21 20:10:05 2012] Updating source flux to 2.9e-14
[Tue Feb 21 20:10:09 2012] Source 13 has fewer than 100.000000 counts, skipping spectral fitting