[Fri Aug 17 12:25:48 2012] Detection parameters:
  Position = (399.4, 319.0) = 11 55 4.63 -79 19 10.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 122.1 +/- 17.1
  Background counts = 33.8
  Rate = 0.02 +/- 0.003

[Fri Aug 17 12:25:49 2012] Off-axis axis estimate = 7.47'
[Fri Aug 17 12:27:09 2012] Using EEF radius (= 10.16 ")to estimate initial spatial extent for simple fitting
[Fri Aug 17 12:27:09 2012] Initial guess for spatial extent in simple fitting = 10.16"
[Fri Aug 17 12:27:09 2012] source mask rpix=2.3, npix_max = 32, mask sum = 20, frac = 0.622
[Fri Aug 17 12:27:09 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 10.16"
[Fri Aug 17 12:33:54 2012] fullrun_pn_xmm0550120601_pi300-10000_cl_pass0_src3.ximg exists
[Fri Aug 17 12:33:54 2012] fullrun_pn_xmm0550120601_pi300-10000_cl_pass0_src3_1.ximg exists
[Fri Aug 17 12:33:54 2012] Fit fullrun_pn_xmm0550120601_pi300-10000_cl_pass0_src3 appears to have run properly
[Fri Aug 17 12:33:54 2012] fullrun_pn_xmm0550120601_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Fri Aug 17 12:33:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0550120601_pi300-10000_cl_pass0_tfrozen_src3.csv
[Fri Aug 17 12:33:54 2012] fullrun_pn_xmm0550120601_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Fri Aug 17 12:33:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0550120601_pi300-10000_cl_pass0_tfrozen_src3.csv
[Fri Aug 17 12:33:54 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0550120601_pi300-10000_cl_pass0_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0550120601_pi300-10000_cl_pass0_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 17 12:47:25 2012] Spatial fit model total counts = 92.572600, observed total counts = 89.000000
[Fri Aug 17 12:47:25 2012] Offset between fit and detection position for source 3 = 1.162126 pixels
[Fri Aug 17 12:47:25 2012] 91.372000 total counts/ 71.733500 bgd. counts: snr = 2.318715
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 1.162126 pixels
  Position = (399.0, 317.9) = 11 55 5.24 -79 19 0.7
  Extent = 4.6" x 4.6", rotation angle = 0
  Source counts = 19.6 +/- 9.6
  Background counts = 71.7
  Rate = 0.006 +/- 0.003
[Fri Aug 17 12:47:25 2012] Vigneting correction estimate = 1.000000
[Fri Aug 17 12:47:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 17 12:47:25 2012] Assessing source extent using major
[Fri Aug 17 12:47:25 2012] Source does appear to be extended
[Fri Aug 17 12:47:25 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 17 12:47:36 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Aug 17 12:47:36 2012] Initial guess for spatial extent in simple fitting = 4.56"
[Fri Aug 17 12:47:36 2012] source mask rpix=1.0, npix_max = 9, mask sum = 4, frac = 0.417
[Fri Aug 17 12:47:36 2012] Skipping simple spatial due to low active detector fraction
[Fri Aug 17 13:06:57 2012] Vigneting correction estimate = 1.000000
[Fri Aug 17 13:06:57 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 17 13:06:57 2012] Assessing source extent using major
[Fri Aug 17 13:06:57 2012] Source does appear to be extended
[Fri Aug 17 13:06:57 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 17 13:07:05 2012] XMMSAS src. selection expression = ellipse(34664.846878, 27606.508000, 273.551408, 273.551408, 0.000000, X, Y)
[Fri Aug 17 13:07:05 2012] Writing source region out to fullrun_pn_xmm0550120601_pi300-10000_pass1_cl_src3_src.reg
[Fri Aug 17 13:07:05 2012] Extracting stamp from image fullrun_pn_xmm0550120601_pi300-10000_cl_sm2.00.img.gz, (383, 302) - (415, 334)
[Fri Aug 17 13:07:05 2012] XMMSAS bgd. selection expression = annulus(34664.846878, 27606.508000, 455.919013, 911.838026, X, Y)
[Fri Aug 17 13:07:05 2012] Writing fullrun_pn_xmm0550120601_pi300-10000_pass1_cl_src3.gif
[Fri Aug 17 13:08:05 2012] Mean detx,y = (-3186.49, -7159.46) 
[Fri Aug 17 13:08:07 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Aug 17 13:08:19 2012] Binned source spectrum to 10 counts/bin
[Fri Aug 17 13:08:19 2012] Setting source spectrum file to fullrun_pn_xmm0550120601_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Fri Aug 17 13:08:19 2012] Setting bgd. spectrum file to fullrun_pn_xmm0550120601_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Fri Aug 17 13:12:36 2012] Not generating rmf since there are only 19 counts
[Fri Aug 17 13:12:36 2012] rmf not generated due to insufficient counts
[Fri Aug 17 13:24:25 2012] Updating aperture counts using extracted products
[Fri Aug 17 13:24:25 2012] Error reading totcts from fullrun_pn_xmm0550120601_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Fri Aug 17 13:24:25 2012] Calculating source flux in energy range 0.30-8.00
[Fri Aug 17 13:24:25 2012] Using photon index=1.80, rate=0.00589, arf fullrun_pn_xmm0550120601_pi300-10000_pass1_cl_src3.arf
[Fri Aug 17 13:24:25 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Aug 17 13:24:25 2012] Updating source flux to 3.7e-14
[Fri Aug 17 13:24:39 2012] Source 3 has fewer than 100.000000 counts, skipping spectral fitting