[Tue Mar 13 12:46:52 2012] Detection parameters:
  Position = (188.9, 481.1) = 8 29 17.59 -33 34 42.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 38.2 +/- 7.4
  Background counts = 3.5
  Rate = 0.003 +/- 0.0005

[Tue Mar 13 12:46:53 2012] Off-axis axis estimate = 15.44'
[Tue Mar 13 14:20:33 2012] Using EEF radius (= 14.15 ")to estimate initial spatial extent for simple fitting
[Tue Mar 13 14:20:33 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Mar 13 14:20:33 2012] Initial guess for spatial extent in simple fitting = 14.15"
[Tue Mar 13 14:20:33 2012] source mask rpix=3.3, npix_max = 56, mask sum = 42, frac = 0.745
[Tue Mar 13 14:20:33 2012] Giving source the simple spatial ID 14 for pass 0, mean size = 14.15"
[Tue Mar 13 15:07:09 2012] fullrun_mos2_xmm0550120501_pi300-10000_cl_pass0_src14.ximg exists
[Tue Mar 13 15:07:09 2012] fullrun_mos2_xmm0550120501_pi300-10000_cl_pass0_src14_1.ximg exists
[Tue Mar 13 15:07:09 2012] Fit fullrun_mos2_xmm0550120501_pi300-10000_cl_pass0_src14 appears to have run properly
[Tue Mar 13 15:07:09 2012] fullrun_mos2_xmm0550120501_pi300-10000_cl_pass0_tfrozen_src14.ximg exists
[Tue Mar 13 15:07:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550120501_pi300-10000_cl_pass0_tfrozen_src14.csv
[Tue Mar 13 15:07:09 2012] fullrun_mos2_xmm0550120501_pi300-10000_cl_pass0_tfrozen_src14_1.ximg exists
[Tue Mar 13 15:07:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550120501_pi300-10000_cl_pass0_tfrozen_src14.csv
[Tue Mar 13 15:07:09 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0550120501_pi300-10000_cl_pass0_tfrozen_src14_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0550120501_pi300-10000_cl_pass0_tfrozen_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 13 15:07:25 2012] Spatial fit model total counts = 59.301600, observed total counts = 54.000000
[Tue Mar 13 15:07:25 2012] Offset between fit and detection position for source 7 = 0.237150 pixels
[Tue Mar 13 15:07:25 2012] 57.645900 total counts/ 16.501200 bgd. counts: snr = 10.128757
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 0.237150 pixels
  Position = (188.9, 481.4) = 8 29 17.59 -33 34 47.0
  Extent = 11.0 (6.4-15.9)" x 3.8 (3.5-13.5)", rotation angle = 138 (126-0) degrees
  Source counts = 41.1 +/- 7.6
  Background counts = 16.5
  Rate = 0.003 +/- 0.0005
[Tue Mar 13 15:07:25 2012] Vigneting correction estimate = 1.000000
[Tue Mar 13 15:07:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 13 15:07:25 2012] Assessing source extent using major axis lower bound
[Tue Mar 13 15:07:25 2012] Source does appear to be extended
[Tue Mar 13 15:07:25 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.47
[Tue Mar 13 16:21:58 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Mar 13 16:21:58 2012] Initial guess for spatial extent in simple fitting = 7.41"
[Tue Mar 13 16:21:58 2012] source mask rpix=1.7, npix_max = 19, mask sum = 15, frac = 0.772
[Tue Mar 13 16:21:58 2012] Giving source the simple spatial ID 14 for pass 1, mean size = 7.41"
[Tue Mar 13 16:57:39 2012] fullrun_mos2_xmm0550120501_pi300-10000_cl_pass1_src14.ximg exists
[Tue Mar 13 16:57:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550120501_pi300-10000_cl_pass1_src14.csv
[Tue Mar 13 16:57:39 2012] fullrun_mos2_xmm0550120501_pi300-10000_cl_pass1_src14_1.ximg exists
[Tue Mar 13 16:57:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550120501_pi300-10000_cl_pass1_src14.csv
[Tue Mar 13 16:57:39 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0550120501_pi300-10000_cl_pass1_src14_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0550120501_pi300-10000_cl_pass1_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 13 16:57:39 2012] fullrun_mos2_xmm0550120501_pi300-10000_cl_pass1_tfrozen_src14.ximg exists
[Tue Mar 13 16:57:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550120501_pi300-10000_cl_pass1_tfrozen_src14.csv
[Tue Mar 13 16:57:39 2012] fullrun_mos2_xmm0550120501_pi300-10000_cl_pass1_tfrozen_src14_1.ximg exists
[Tue Mar 13 16:57:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550120501_pi300-10000_cl_pass1_tfrozen_src14.csv
[Tue Mar 13 16:57:39 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0550120501_pi300-10000_cl_pass1_tfrozen_src14_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0550120501_pi300-10000_cl_pass1_tfrozen_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 13 16:57:54 2012] Spatial fit model total counts = 76.771500, observed total counts = 49.000000
[Tue Mar 13 16:57:54 2012] Poor agreement between spatial fit and data for source 7
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue Mar 13 16:57:54 2012] Vigneting correction estimate = 1.000000
[Tue Mar 13 16:57:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 13 16:57:54 2012] Assessing source extent using major axis lower bound
[Tue Mar 13 16:57:54 2012] Source does appear to be extended
[Tue Mar 13 16:57:54 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.47
[Tue Mar 13 17:46:45 2012] XMMSAS src. selection expression = ellipse(16388.299000, 41831.849360, 659.154019, 230.009407, 138.368124, X, Y)
[Tue Mar 13 17:46:45 2012] Writing source region out to fullrun_mos2_xmm0550120501_pi300-10000_pass1_cl_src7_src.reg
[Tue Mar 13 17:46:45 2012] Extracting stamp from image fullrun_mos2_xmm0550120501_pi300-10000_cl_sm2.00.img.gz, (151, 444) - (227, 519)
[Tue Mar 13 17:46:45 2012] XMMSAS bgd. selection expression = annulus(16388.299000, 41831.849360, 1098.590032, 2197.180063, X, Y)
[Tue Mar 13 17:46:45 2012] Writing fullrun_mos2_xmm0550120501_pi300-10000_pass1_cl_src7.gif
[Tue Mar 13 17:51:57 2012] Mean detx,y = (-2362.50, 16527.89) 
[Tue Mar 13 17:51:59 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Mar 13 17:52:21 2012] Binned source spectrum to 10 counts/bin
[Tue Mar 13 17:52:21 2012] Setting source spectrum file to fullrun_mos2_xmm0550120501_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Tue Mar 13 17:52:21 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0550120501_pi300-10000_pass1_cl_src7_bgd.pi.gz
[Tue Mar 13 17:59:59 2012] Not generating rmf since there are only 41 counts
[Tue Mar 13 17:59:59 2012] rmf not generated due to insufficient counts
[Tue Mar 13 18:00:45 2012] Updating aperture counts using extracted products
[Tue Mar 13 18:00:46 2012] Error reading totcts from fullrun_mos2_xmm0550120501_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Tue Mar 13 18:00:46 2012] Calculating source flux in energy range 0.30-8.00
[Tue Mar 13 18:00:46 2012] Using photon index=1.80, rate=0.00293, arf fullrun_mos2_xmm0550120501_pi300-10000_pass1_cl_src7.arf
[Tue Mar 13 18:00:46 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Mar 13 18:00:46 2012] Updating source flux to 1.6e-13
[Tue Mar 13 18:01:32 2012] Flag p found in src. 7 procflags, skipping spectral fitting
[Tue Mar 13 18:01:32 2012] Source 7 has fewer than 100.000000 counts, skipping spectral fitting