[Wed Nov 30 15:04:51 2011] Detection parameters:
  Position = (473.2, 257.5) = 15 48 13.08 -35 43 34.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 40.6 +/- 7.5
  Background counts = 2.7
  Rate = 0.005 +/- 0.0009

[Wed Nov 30 15:04:52 2011] Off-axis axis estimate = 13.01'
[Wed Nov 30 15:39:04 2011] Using EEF radius (= 12.93 ")to estimate initial spatial extent for simple fitting
[Wed Nov 30 15:39:04 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Nov 30 15:39:04 2011] Initial guess for spatial extent in simple fitting = 12.93"
[Wed Nov 30 15:39:04 2011] source mask rpix=3.0, npix_max = 48, mask sum = 36, frac = 0.746
[Wed Nov 30 15:39:04 2011] Giving source the simple spatial ID 2 for pass 0, mean size = 12.93"
[Wed Nov 30 15:51:56 2011] fullrun_mos2_xmm0550120301_pi300-10000_cl_pass0_src2.ximg exists
[Wed Nov 30 15:51:56 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550120301_pi300-10000_cl_pass0_src2.csv
[Wed Nov 30 15:51:56 2011] fullrun_mos2_xmm0550120301_pi300-10000_cl_pass0_src2_1.ximg exists
[Wed Nov 30 15:51:56 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550120301_pi300-10000_cl_pass0_src2.csv
[Wed Nov 30 15:51:56 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0550120301_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0550120301_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Nov 30 15:51:56 2011] fullrun_mos2_xmm0550120301_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Wed Nov 30 15:51:56 2011] fullrun_mos2_xmm0550120301_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Wed Nov 30 15:51:56 2011] Fit fullrun_mos2_xmm0550120301_pi300-10000_cl_pass0_tfrozen_src2 appears to have run properly
[Wed Nov 30 15:52:04 2011] Spatial fit model total counts = 51.191300, observed total counts = 54.000000
[Wed Nov 30 15:52:04 2011] Offset between fit and detection position for source 1 = 0.863718 pixels
[Wed Nov 30 15:52:04 2011] 48.827200 total counts/ 15.558100 bgd. counts: snr = 8.434567
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.863718 pixels
  Position = (472.3, 257.4) = 15 48 13.39 -35 43 36.6
  Extent = 5.6 (4.6-7.1)", rotation angle = 0
  Source counts = 33.3 +/- 7.0
  Background counts = 15.6
  Rate = 0.004 +/- 0.0008
[Wed Nov 30 15:52:04 2011] Vigneting correction estimate = 1.000000
[Wed Nov 30 15:52:04 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Nov 30 15:52:04 2011] Assessing source extent using major axis lower bound
[Wed Nov 30 15:52:04 2011] Source does appear to be extended
[Wed Nov 30 15:52:04 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Nov 30 16:20:26 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Nov 30 16:20:26 2011] Initial guess for spatial extent in simple fitting = 5.61"
[Wed Nov 30 16:20:26 2011] source mask rpix=1.3, npix_max = 12, mask sum = 9, frac = 0.702
[Wed Nov 30 16:20:26 2011] Giving source the simple spatial ID 2 for pass 1, mean size = 5.61"
[Wed Nov 30 16:27:39 2011] fullrun_mos2_xmm0550120301_pi300-10000_cl_pass1_src2.ximg exists
[Wed Nov 30 16:27:39 2011] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0550120301_pi300-10000_cl_pass1_src2.csv
[Wed Nov 30 16:27:39 2011] fullrun_mos2_xmm0550120301_pi300-10000_cl_pass1_src2_1.ximg exists
[Wed Nov 30 16:27:39 2011] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0550120301_pi300-10000_cl_pass1_src2.csv
[Wed Nov 30 16:27:39 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0550120301_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0550120301_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Nov 30 16:27:39 2011] fullrun_mos2_xmm0550120301_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Wed Nov 30 16:27:39 2011] fullrun_mos2_xmm0550120301_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Wed Nov 30 16:27:39 2011] Fit fullrun_mos2_xmm0550120301_pi300-10000_cl_pass1_tfrozen_src2 appears to have run properly
[Wed Nov 30 16:27:46 2011] Spatial fit model total counts = 50.156400, observed total counts = 52.000000
[Wed Nov 30 16:27:46 2011] Offset between fit and detection position for source 1 = 0.013599 pixels
[Wed Nov 30 16:27:46 2011] 47.939600 total counts/ 14.487600 bgd. counts: snr = 8.788684
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.013599 pixels
  Position = (472.3, 257.4) = 15 48 13.39 -35 43 36.6
  Extent = 5.6 (4.6-7.3)", rotation angle = 0
  Source counts = 33.5 +/- 6.9
  Background counts = 14.5
  Rate = 0.004 +/- 0.0008
[Wed Nov 30 16:27:46 2011] Vigneting correction estimate = 1.000000
[Wed Nov 30 16:27:46 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Nov 30 16:27:46 2011] Assessing source extent using major axis lower bound
[Wed Nov 30 16:27:46 2011] Source does appear to be extended
[Wed Nov 30 16:27:46 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Nov 30 16:51:49 2011] XMMSAS src. selection expression = ellipse(41045.310800, 22342.154000, 338.975410, 338.975410, 0.000000, X, Y)
[Wed Nov 30 16:51:49 2011] Writing source region out to fullrun_mos2_xmm0550120301_pi300-10000_pass1_cl_src1_src.reg
[Wed Nov 30 16:51:49 2011] Extracting stamp from image fullrun_mos2_xmm0550120301_pi300-10000_cl_sm2.00.img.gz, (453, 238) - (492, 277)
[Wed Nov 30 16:51:49 2011] XMMSAS bgd. selection expression = annulus(41045.310800, 22342.154000, 564.959016, 1129.918033, X, Y)
[Wed Nov 30 16:51:49 2011] Writing fullrun_mos2_xmm0550120301_pi300-10000_pass1_cl_src1.gif
[Wed Nov 30 16:52:10 2011] Mean detx,y = (-13058.57, -7845.89) 
[Wed Nov 30 16:52:13 2011] Setting backscal keywords in source and bgd. spectrum
[Wed Nov 30 16:52:31 2011] Binned source spectrum to 10 counts/bin
[Wed Nov 30 16:52:31 2011] Setting source spectrum file to fullrun_mos2_xmm0550120301_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed Nov 30 16:52:31 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0550120301_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Wed Nov 30 16:57:51 2011] Not generating rmf since there are only 33 counts
[Wed Nov 30 16:57:51 2011] rmf not generated due to insufficient counts
[Wed Nov 30 16:58:22 2011] Updating aperture counts using extracted products
[Wed Nov 30 16:58:22 2011] Error reading totcts from fullrun_mos2_xmm0550120301_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed Nov 30 16:58:22 2011] Calculating source flux in energy range 0.30-8.00
[Wed Nov 30 16:58:22 2011] Using photon index=1.80, rate=0.00387, arf fullrun_mos2_xmm0550120301_pi300-10000_pass1_cl_src1.arf
[Wed Nov 30 16:58:22 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Nov 30 16:58:22 2011] Updating source flux to 1.2e-13
[Wed Nov 30 16:58:37 2011] Source 1 has fewer than 100.000000 counts, skipping spectral fitting