[Sun Feb 19 10:18:40 2012] Detection parameters:
  Position = (259.4, 214.2) = 16 32 12.12 -24 41 10.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 56.9 +/- 14.0
  Background counts = 48.8
  Rate = 0.003 +/- 0.0008

[Sun Feb 19 10:18:40 2012] Off-axis axis estimate = 6.73'
[Sun Feb 19 10:21:53 2012] Using EEF radius (= 9.79 ")to estimate initial spatial extent for simple fitting
[Sun Feb 19 10:21:53 2012] Initial guess for spatial extent in simple fitting = 9.79"
[Sun Feb 19 10:21:53 2012] source mask rpix=2.3, npix_max = 30, mask sum = 30, frac = 0.991
[Sun Feb 19 10:21:53 2012] Giving source the simple spatial ID 11 for pass 0, mean size = 9.79"
[Sun Feb 19 10:45:10 2012] fullrun_pn_xmm0550120201_pi300-10000_cl_pass0_src11.ximg exists
[Sun Feb 19 10:45:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0550120201_pi300-10000_cl_pass0_src11.csv
[Sun Feb 19 10:45:10 2012] fullrun_pn_xmm0550120201_pi300-10000_cl_pass0_src11_1.ximg exists
[Sun Feb 19 10:45:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0550120201_pi300-10000_cl_pass0_src11.csv
[Sun Feb 19 10:45:10 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0550120201_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0550120201_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb 19 10:45:10 2012] fullrun_pn_xmm0550120201_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Sun Feb 19 10:45:10 2012] fullrun_pn_xmm0550120201_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Sun Feb 19 10:45:10 2012] Fit fullrun_pn_xmm0550120201_pi300-10000_cl_pass0_tfrozen_src11 appears to have run properly
[Sun Feb 19 11:26:41 2012] Source 12 is offset by -1.111736 and -9.783080 pixels which is larger than
2 X fitted extent = 3.650947 x 3.650947, not incorporating fit results
[Sun Feb 19 11:26:41 2012] Vigneting correction estimate = 1.000000
[Sun Feb 19 11:26:41 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb 19 11:26:41 2012] Assessing source extent using major
[Sun Feb 19 11:26:41 2012] Source does appear to be extended
[Sun Feb 19 11:26:41 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Feb 19 11:26:56 2012] Using EEF radius (= 9.79 ")to estimate initial spatial extent for simple fitting
[Sun Feb 19 11:26:56 2012] Initial guess for spatial extent in simple fitting = 9.79"
[Sun Feb 19 11:26:56 2012] source mask rpix=2.3, npix_max = 30, mask sum = 30, frac = 0.991
[Sun Feb 19 11:26:56 2012] Giving source the simple spatial ID 9 for pass 1, mean size = 9.79"
[Sun Feb 19 11:47:24 2012] fullrun_pn_xmm0550120201_pi300-10000_cl_pass1_src9.ximg exists
[Sun Feb 19 11:47:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0550120201_pi300-10000_cl_pass1_src9.csv
[Sun Feb 19 11:47:24 2012] fullrun_pn_xmm0550120201_pi300-10000_cl_pass1_src9_1.ximg exists
[Sun Feb 19 11:47:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0550120201_pi300-10000_cl_pass1_src9.csv
[Sun Feb 19 11:47:24 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0550120201_pi300-10000_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0550120201_pi300-10000_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb 19 11:47:24 2012] fullrun_pn_xmm0550120201_pi300-10000_cl_pass1_tfrozen_src9.ximg exists
[Sun Feb 19 11:47:24 2012] fullrun_pn_xmm0550120201_pi300-10000_cl_pass1_tfrozen_src9_1.ximg exists
[Sun Feb 19 11:47:24 2012] Fit fullrun_pn_xmm0550120201_pi300-10000_cl_pass1_tfrozen_src9 appears to have run properly
[Sun Feb 19 12:24:40 2012] Spatial fit model total counts = 805.062000, observed total counts = 804.000000
[Sun Feb 19 12:24:40 2012] Offset between fit and detection position for source 12 = 9.290401 pixels
[Sun Feb 19 12:24:40 2012] 880.433000 total counts/ 695.791000 bgd. counts: snr = 6.999888
Spatial fit parameters:
  Offset between fit and detection position for source 12 = 9.290401 pixels
  Position = (253.8, 206.8) = 16 32 13.91 -24 41 39.5
  Extent = 19.6 (15.6-39.2)", rotation angle = 0
  Source counts = 184.6 +/- 29.7
  Background counts = 695.8
  Rate = 0.01 +/- 0.002
[Sun Feb 19 12:24:41 2012] Vigneting correction estimate = 1.000000
[Sun Feb 19 12:24:41 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb 19 12:24:41 2012] Assessing source extent using major axis lower bound
[Sun Feb 19 12:24:41 2012] Source does appear to be extended
[Sun Feb 19 12:24:41 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Feb 19 12:24:54 2012] XMMSAS src. selection expression = ellipse(22034.626000, 17943.952000, 1175.154034, 1175.154034, 0.000000, X, Y)
[Sun Feb 19 12:24:54 2012] Writing source region out to fullrun_pn_xmm0550120201_pi300-10000_pass1_cl_src12_src.reg
[Sun Feb 19 12:24:54 2012] Extracting stamp from image fullrun_pn_xmm0550120201_pi300-10000_cl_sm2.00.img.gz, (186, 139) - (321, 274)
[Sun Feb 19 12:24:54 2012] XMMSAS bgd. selection expression = annulus(22034.626000, 17943.952000, 1958.590056, 3917.180113, X, Y) && !ellipse(22593.690426, 19497.810564, 526.397609, 410.843596, 31.666233, X, Y) && !ellipse(19811.436417, 17240.320648, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Feb 19 12:24:54 2012] Writing fullrun_pn_xmm0550120201_pi300-10000_pass1_cl_src12.gif
[Sun Feb 19 12:48:03 2012] Mean detx,y = (-5984.09, 8737.18) 
[Sun Feb 19 12:48:08 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Feb 19 12:49:28 2012] Binned source spectrum to 10 counts/bin
[Sun Feb 19 12:49:29 2012] Setting source spectrum file to fullrun_pn_xmm0550120201_pi300-10000_pass1_cl_src12_src_b10.pi.gz
[Sun Feb 19 12:49:29 2012] Setting bgd. spectrum file to fullrun_pn_xmm0550120201_pi300-10000_pass1_cl_src12_bgd.pi.gz
[Sun Feb 19 13:53:12 2012] Updating aperture counts using extracted products
[Sun Feb 19 13:53:12 2012] Error reading totcts from fullrun_pn_xmm0550120201_pi300-10000_pass1_cl_src12_src_b10.pi.gz
[Sun Feb 19 13:53:13 2012] Calculating source flux in energy range 0.30-8.00
[Sun Feb 19 13:53:13 2012] Using photon index=1.80, rate=0.0109, arf fullrun_pn_xmm0550120201_pi300-10000_pass1_cl_src12.arf
[Sun Feb 19 13:53:13 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Feb 19 13:53:13 2012] Updating source flux to 4.9e-14
[Sun Feb 19 13:54:46 2012] Flag b found in src. 12 procflags, skipping spectral fitting