[Sun Feb 19 10:19:07 2012] Detection parameters:
  Position = (231.3, 360.1) = 16 32 21.06 -24 30 34.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 363.2 +/- 22.4
  Background counts = 11.2
  Rate = 0.03 +/- 0.002

[Sun Feb 19 10:19:07 2012] Off-axis axis estimate = 6.61'
[Sun Feb 19 10:45:10 2012] Using EEF radius (= 9.73 ")to estimate initial spatial extent for simple fitting
[Sun Feb 19 10:45:10 2012] Initial guess for spatial extent in simple fitting = 9.73"
[Sun Feb 19 10:45:10 2012] source mask rpix=2.2, npix_max = 29, mask sum = 19, frac = 0.634
[Sun Feb 19 10:45:10 2012] Giving source the simple spatial ID 4 for pass 0, mean size = 9.73"
[Sun Feb 19 11:08:36 2012] fullrun_mos1_xmm0550120201_pi300-10000_cl_pass0_src4.ximg exists
[Sun Feb 19 11:08:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0550120201_pi300-10000_cl_pass0_src4.csv
[Sun Feb 19 11:08:36 2012] fullrun_mos1_xmm0550120201_pi300-10000_cl_pass0_src4_1.ximg exists
[Sun Feb 19 11:08:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0550120201_pi300-10000_cl_pass0_src4.csv
[Sun Feb 19 11:08:36 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0550120201_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0550120201_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb 19 11:08:36 2012] fullrun_mos1_xmm0550120201_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Sun Feb 19 11:08:36 2012] fullrun_mos1_xmm0550120201_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Sun Feb 19 11:08:36 2012] Fit fullrun_mos1_xmm0550120201_pi300-10000_cl_pass0_tfrozen_src4 appears to have run properly
[Sun Feb 19 11:26:44 2012] Warning: source 4 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 7 at 13.547046 pixels away
[Sun Feb 19 11:26:44 2012] Vigneting correction estimate = 1.000000
[Sun Feb 19 11:26:44 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb 19 11:26:44 2012] Assessing source extent using major
[Sun Feb 19 11:26:44 2012] Source does appear to be extended
[Sun Feb 19 11:26:44 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Feb 19 11:47:24 2012] Using EEF radius (= 9.73 ")to estimate initial spatial extent for simple fitting
[Sun Feb 19 11:47:24 2012] Initial guess for spatial extent in simple fitting = 9.73"
[Sun Feb 19 11:47:24 2012] source mask rpix=2.2, npix_max = 29, mask sum = 19, frac = 0.634
[Sun Feb 19 11:47:24 2012] Giving source the simple spatial ID 4 for pass 1, mean size = 9.73"
[Sun Feb 19 12:07:54 2012] fullrun_mos1_xmm0550120201_pi300-10000_cl_pass1_src4.ximg exists
[Sun Feb 19 12:07:54 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0550120201_pi300-10000_cl_pass1_src4.csv
[Sun Feb 19 12:07:54 2012] fullrun_mos1_xmm0550120201_pi300-10000_cl_pass1_src4_1.ximg exists
[Sun Feb 19 12:07:54 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0550120201_pi300-10000_cl_pass1_src4.csv
[Sun Feb 19 12:07:54 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0550120201_pi300-10000_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0550120201_pi300-10000_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb 19 12:07:54 2012] fullrun_mos1_xmm0550120201_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Sun Feb 19 12:07:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0550120201_pi300-10000_cl_pass1_tfrozen_src4.csv
[Sun Feb 19 12:07:54 2012] fullrun_mos1_xmm0550120201_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Sun Feb 19 12:07:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0550120201_pi300-10000_cl_pass1_tfrozen_src4.csv
[Sun Feb 19 12:07:54 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0550120201_pi300-10000_cl_pass1_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0550120201_pi300-10000_cl_pass1_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb 19 12:24:42 2012] Source 7 is offset by 4.117493 and 3.621444 pixels which is larger than
2 X fitted extent = 0.608455 x 0.608837, not incorporating fit results
[Sun Feb 19 12:24:42 2012] Vigneting correction estimate = 1.000000
[Sun Feb 19 12:24:42 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb 19 12:24:42 2012] Assessing source extent using major
[Sun Feb 19 12:24:42 2012] Source does appear to be extended
[Sun Feb 19 12:24:42 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Feb 19 13:07:25 2012] XMMSAS src. selection expression = ellipse(20076.057877, 31277.221588, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Feb 19 13:07:25 2012] Writing source region out to fullrun_mos1_xmm0550120201_pi300-10000_pass1_cl_src7_src.reg
[Sun Feb 19 13:07:25 2012] Extracting stamp from image fullrun_mos1_xmm0550120201_pi300-10000_cl_sm2.00.img.gz, (194, 323) - (269, 398)
[Sun Feb 19 13:07:25 2012] XMMSAS bgd. selection expression = annulus(20076.057877, 31277.221588, 1087.500000, 2175.000000, X, Y)
[Sun Feb 19 13:07:25 2012] Writing fullrun_mos1_xmm0550120201_pi300-10000_pass1_cl_src7.gif
[Sun Feb 19 13:10:50 2012] Mean detx,y = (4693.83, -6340.42) 
[Sun Feb 19 13:10:52 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Feb 19 13:11:32 2012] Binned source spectrum to 10 counts/bin
[Sun Feb 19 13:11:35 2012] Setting source spectrum file to fullrun_mos1_xmm0550120201_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Sun Feb 19 13:11:35 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0550120201_pi300-10000_pass1_cl_src7_bgd.pi.gz
[Sun Feb 19 13:25:36 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Feb 19 13:25:36 2012] rmf not generated due to insufficient counts
[Sun Feb 19 13:53:13 2012] Updating aperture counts using extracted products
[Sun Feb 19 13:53:13 2012] Error reading totcts from fullrun_mos1_xmm0550120201_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Sun Feb 19 13:53:13 2012] Calculating source flux in energy range 0.30-8.00
[Sun Feb 19 13:53:13 2012] Using photon index=1.80, rate=0.0333, arf fullrun_mos1_xmm0550120201_pi300-10000_pass1_cl_src7.arf
[Sun Feb 19 13:53:13 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Feb 19 13:53:14 2012] Updating source flux to 6.9e-13
[Sun Feb 19 13:53:16 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting