[Sun Feb 19 10:19:07 2012] Detection parameters:
  Position = (422.5, 367.0) = 16 31 20.13 -24 30 2.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 4272.2 +/- 79.4
  Background counts = 12.8
  Rate = 0.4 +/- 0.007

[Sun Feb 19 10:19:07 2012] Off-axis axis estimate = 10.28'
[Sun Feb 19 10:45:10 2012] Using EEF radius (= 11.57 ")to estimate initial spatial extent for simple fitting
[Sun Feb 19 10:45:10 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Feb 19 10:45:10 2012] Initial guess for spatial extent in simple fitting = 11.57"
[Sun Feb 19 10:45:10 2012] source mask rpix=2.7, npix_max = 39, mask sum = 42, frac = 1.052
[Sun Feb 19 10:45:10 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 11.57"
[Sun Feb 19 11:08:36 2012] fullrun_mos1_xmm0550120201_pi300-10000_cl_pass0_src1.ximg exists
[Sun Feb 19 11:08:36 2012] fullrun_mos1_xmm0550120201_pi300-10000_cl_pass0_src1_1.ximg exists
[Sun Feb 19 11:08:36 2012] Fit fullrun_mos1_xmm0550120201_pi300-10000_cl_pass0_src1 appears to have run properly
[Sun Feb 19 11:08:36 2012] fullrun_mos1_xmm0550120201_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sun Feb 19 11:08:36 2012] fullrun_mos1_xmm0550120201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sun Feb 19 11:08:36 2012] Fit fullrun_mos1_xmm0550120201_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sun Feb 19 11:26:44 2012] Spatial fit model total counts = 4473.680000, observed total counts = 4473.000000
[Sun Feb 19 11:26:44 2012] Offset between fit and detection position for source 2 = 0.270145 pixels
[Sun Feb 19 11:26:44 2012] 4473.580000 total counts/ 1068.080000 bgd. counts: snr = 104.202705
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.270145 pixels
  Position = (422.2, 366.9) = 16 31 20.21 -24 30 3.0
  Extent = 7.0 (6.9-7.2)", rotation angle = 0
  Source counts = 3405.5 +/- 66.9
  Background counts = 1068.1
  Rate = 0.2 +/- 0.003
[Sun Feb 19 11:26:44 2012] Vigneting correction estimate = 1.000000
[Sun Feb 19 11:26:44 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb 19 11:26:44 2012] Assessing source extent using major axis lower bound
[Sun Feb 19 11:26:44 2012] Source does appear to be extended
[Sun Feb 19 11:26:44 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Feb 19 11:47:24 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Feb 19 11:47:24 2012] Initial guess for spatial extent in simple fitting = 7.04"
[Sun Feb 19 11:47:24 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.891
[Sun Feb 19 11:47:24 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 7.04"
[Sun Feb 19 12:07:54 2012] fullrun_mos1_xmm0550120201_pi300-10000_cl_pass1_src1.ximg exists
[Sun Feb 19 12:07:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0550120201_pi300-10000_cl_pass1_src1.csv
[Sun Feb 19 12:07:54 2012] fullrun_mos1_xmm0550120201_pi300-10000_cl_pass1_src1_1.ximg exists
[Sun Feb 19 12:07:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0550120201_pi300-10000_cl_pass1_src1.csv
[Sun Feb 19 12:07:54 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0550120201_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0550120201_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb 19 12:07:54 2012] fullrun_mos1_xmm0550120201_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sun Feb 19 12:07:54 2012] fullrun_mos1_xmm0550120201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sun Feb 19 12:07:54 2012] Fit fullrun_mos1_xmm0550120201_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sun Feb 19 12:24:42 2012] Spatial fit model total counts = 4155.000000, observed total counts = 4155.000000
[Sun Feb 19 12:24:42 2012] Offset between fit and detection position for source 2 = 0.021386 pixels
[Sun Feb 19 12:24:42 2012] 4148.071000 total counts/ 940.001000 bgd. counts: snr = 104.635650
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.021386 pixels
  Position = (422.3, 366.9) = 16 31 20.21 -24 30 2.9
  Extent = 6.5 (6.3-6.7)", rotation angle = 0
  Source counts = 3208.1 +/- 64.4
  Background counts = 940.0
  Rate = 0.2 +/- 0.003
[Sun Feb 19 12:24:42 2012] Vigneting correction estimate = 1.000000
[Sun Feb 19 12:24:42 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb 19 12:24:42 2012] Assessing source extent using major axis lower bound
[Sun Feb 19 12:24:42 2012] Source does appear to be extended
[Sun Feb 19 12:24:42 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Feb 19 13:07:25 2012] Counts = 3208.070000, rescaling region sizes by 2.000000
[Sun Feb 19 13:07:25 2012] XMMSAS src. selection expression = ellipse(36687.563600, 31870.971600, 782.558423, 782.558423, 0.000000, X, Y)
[Sun Feb 19 13:07:25 2012] Writing source region out to fullrun_mos1_xmm0550120201_pi300-10000_pass1_cl_src2_src.reg
[Sun Feb 19 13:07:25 2012] Extracting stamp from image fullrun_mos1_xmm0550120201_pi300-10000_cl_sm2.00.img.gz, (377, 322) - (467, 412)
[Sun Feb 19 13:07:25 2012] XMMSAS bgd. selection expression = annulus(36687.563600, 31870.971600, 2608.528075, 5217.056150, X, Y) && !ellipse(37884.739696, 27068.462400, 553.511216, 553.511216, 0.000000, X, Y) && !ellipse(33065.821200, 34786.811600, 461.204013, 461.204013, 0.000000, X, Y) && !ellipse(38092.134857, 28600.075897, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33772.258820, 35194.467743, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Feb 19 13:07:25 2012] Writing fullrun_mos1_xmm0550120201_pi300-10000_pass1_cl_src2.gif
[Sun Feb 19 13:07:28 2012] Mean detx,y = (2986.11, 10124.04) 
[Sun Feb 19 13:07:31 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Feb 19 13:08:53 2012] Binned source spectrum to 10 counts/bin
[Sun Feb 19 13:08:54 2012] Setting source spectrum file to fullrun_mos1_xmm0550120201_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Sun Feb 19 13:08:54 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0550120201_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Sun Feb 19 13:53:13 2012] Updating aperture counts using extracted products
[Sun Feb 19 13:53:13 2012] Error reading totcts from fullrun_mos1_xmm0550120201_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Sun Feb 19 13:53:13 2012] Calculating source flux in energy range 0.30-8.00
[Sun Feb 19 13:53:13 2012] Using photon index=1.80, rate=0.165, arf fullrun_mos1_xmm0550120201_pi300-10000_pass1_cl_src2.arf
[Sun Feb 19 13:53:13 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Feb 19 13:53:13 2012] Updating source flux to 2.4e-12
[Sun Feb 19 13:53:56 2012] Reading fit data from xmm0550120201/analysis//spectral/fullrun_mos1_xmm0550120201_pi300-10000_pass1_cl_src2_pl.csv
[Sun Feb 19 13:53:56 2012] Spectral fit parameter nH value = 5.08647e+21
[Sun Feb 19 13:53:56 2012] Spectral fit parameter PhoIndex value = 3.2897
[Sun Feb 19 13:53:56 2012] Failed to get F(0.3-8.0) from xmm0550120201/analysis//spectral/fullrun_mos1_xmm0550120201_pi300-10000_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Sun Feb 19 13:53:56 2012] Calculating source flux in energy range 0.30-8.00
[Sun Feb 19 13:53:56 2012] Using Nh = 5.1e+21, photon index=3.29, rate=0.165, arf fullrun_mos1_xmm0550120201_pi300-10000_pass1_cl_src2.arf
[Sun Feb 19 13:53:56 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Feb 19 13:53:56 2012] Updating source flux to 1.9e-12