[Mon Jul  2 10:07:44 2012] Detection parameters:
  Position = (310.9, 313.2) = 21 6 58.23 38 44 59.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 728.8 +/- 35.8
  Background counts = 7.4
  Rate = 0.05 +/- 0.003

[Mon Jul  2 10:07:44 2012] Off-axis axis estimate = 1.40'
[Mon Jul  2 10:38:45 2012] Using EEF radius (= 7.13 ")to estimate initial spatial extent for simple fitting
[Mon Jul  2 10:38:45 2012] Initial guess for spatial extent in simple fitting = 7.13"
[Mon Jul  2 10:38:45 2012] source mask rpix=1.6, npix_max = 18, mask sum = 9, frac = 0.492
[Mon Jul  2 10:38:45 2012] Skipping simple spatial due to low active detector fraction
[Mon Jul  2 10:49:13 2012] Spatial fit model total counts = 1982.280000, observed total counts = 1950.000000
[Mon Jul  2 10:49:13 2012] Offset between fit and detection position for source 1 = 1.036228 pixels
[Mon Jul  2 10:49:13 2012] Warning, changing simple spatial fit ID from -1 to 1
[Mon Jul  2 10:49:13 2012] 1991.399000 total counts/ 1770.430000 bgd. counts: snr = 5.251604
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 1.036228 pixels
  Position = (310.1, 312.6) = 21 6 58.55 38 44 59.3
  Extent = 3.0 (2.6-3.4)", rotation angle = 0
  Source counts = 221.0 +/- 44.6
  Background counts = 1770.4
  Rate = 0.01 +/- 0.003
[Mon Jul  2 10:49:13 2012] Vigneting correction estimate = 1.000000
[Mon Jul  2 10:49:13 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul  2 10:49:13 2012] Assessing source extent using major axis lower bound
[Mon Jul  2 10:49:13 2012] Source does appear to be extended
[Mon Jul  2 10:49:13 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul  2 10:49:13 2012] Source is confused with source 3
[Mon Jul  2 11:06:46 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Jul  2 11:06:46 2012] Initial guess for spatial extent in simple fitting = 2.96"
[Mon Jul  2 11:06:46 2012] source mask rpix=0.7, npix_max = 5, mask sum = 4, frac = 0.718
[Mon Jul  2 11:06:46 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 2.96"
[Mon Jul  2 11:15:18 2012] fullrun_mos2_xmm0550061301_pi300-10000_cl_pass1_src2.ximg exists
[Mon Jul  2 11:15:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550061301_pi300-10000_cl_pass1_src2.csv
[Mon Jul  2 11:15:18 2012] fullrun_mos2_xmm0550061301_pi300-10000_cl_pass1_src2_1.ximg exists
[Mon Jul  2 11:15:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550061301_pi300-10000_cl_pass1_src2.csv
[Mon Jul  2 11:15:18 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0550061301_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0550061301_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul  2 11:15:18 2012] fullrun_mos2_xmm0550061301_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Mon Jul  2 11:15:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550061301_pi300-10000_cl_pass1_tfrozen_src2.csv
[Mon Jul  2 11:15:18 2012] fullrun_mos2_xmm0550061301_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Mon Jul  2 11:15:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550061301_pi300-10000_cl_pass1_tfrozen_src2.csv
[Mon Jul  2 11:15:18 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0550061301_pi300-10000_cl_pass1_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0550061301_pi300-10000_cl_pass1_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul  2 11:15:21 2012] Source 1 is offset by -0.431497 and 0.082368 pixels which is larger than
2 X fitted extent = 0.339910 x 0.345436, not incorporating fit results
[Mon Jul  2 11:15:21 2012] Vigneting correction estimate = 1.000000
[Mon Jul  2 11:15:21 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul  2 11:15:21 2012] Assessing source extent using major axis lower bound
[Mon Jul  2 11:15:21 2012] Source does appear to be extended
[Mon Jul  2 11:15:21 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul  2 11:33:52 2012] XMMSAS src. selection expression = ellipse(26926.760000, 27147.594000, 177.433205, 177.433205, 0.000000, X, Y)
[Mon Jul  2 11:33:52 2012] Writing source region out to fullrun_mos2_xmm0550061301_pi300-10000_pass1_cl_src1_src.reg
[Mon Jul  2 11:33:52 2012] Extracting stamp from image fullrun_mos2_xmm0550061301_pi300-10000_cl_sm2.00.img.gz, (300, 302) - (320, 323)
[Mon Jul  2 11:33:52 2012] XMMSAS bgd. selection expression = annulus(26926.760000, 27147.594000, 295.722009, 591.444017, X, Y) && !ellipse(27295.075897, 27682.988953, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27130.445496, 28473.935455, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Jul  2 11:33:52 2012] Writing fullrun_mos2_xmm0550061301_pi300-10000_pass1_cl_src1.gif
[Mon Jul  2 11:35:43 2012] Mean detx,y = (401.25, -225.28) 
[Mon Jul  2 11:35:43 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Jul  2 11:35:48 2012] Binned source spectrum to 10 counts/bin
[Mon Jul  2 11:35:48 2012] Setting source spectrum file to fullrun_mos2_xmm0550061301_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon Jul  2 11:35:48 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0550061301_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Mon Jul  2 11:42:12 2012] Updating aperture counts using extracted products
[Mon Jul  2 11:42:12 2012] Error reading totcts from fullrun_mos2_xmm0550061301_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon Jul  2 11:42:12 2012] Calculating source flux in energy range 0.30-8.00
[Mon Jul  2 11:42:12 2012] Using photon index=1.80, rate=0.0135, arf fullrun_mos2_xmm0550061301_pi300-10000_pass1_cl_src1.arf
[Mon Jul  2 11:42:12 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jul  2 11:42:12 2012] Updating source flux to 2.9e-13
[Mon Jul  2 11:42:22 2012] Flag b found in src. 1 procflags, skipping spectral fitting
[Mon Jul  2 11:42:22 2012] Flag c found in src. 1 procflags, skipping spectral fitting
[Mon Jul  2 11:42:29 2012] Reading fit data from xmm0550061301/analysis//spectral/fullrun_mos2_xmm0550061301_pi300-10000_pass1_cl_src1_pl.csv
[Mon Jul  2 11:42:29 2012] Spectral fit parameter nH value = 3.14982e+21
[Mon Jul  2 11:42:29 2012] Spectral fit parameter PhoIndex value = 5.68393
[Mon Jul  2 11:42:29 2012] Failed to get F(0.3-8.0) from xmm0550061301/analysis//spectral/fullrun_mos2_xmm0550061301_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Mon Jul  2 11:42:29 2012] Calculating source flux in energy range 0.30-8.00
[Mon Jul  2 11:42:29 2012] Using Nh = 3.1e+21, photon index=5.68, rate=0.0135, arf fullrun_mos2_xmm0550061301_pi300-10000_pass1_cl_src1.arf
[Mon Jul  2 11:42:29 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jul  2 11:42:29 2012] Updating source flux to 2e-13