[Fri Jun 29 05:11:58 2012] Detection parameters:
  Position = (173.0, 337.1) = 9 28 25.90 -6 3 3.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 61.9 +/- 10.2
  Background counts = 6.7
  Rate = 0.004 +/- 0.0006

[Fri Jun 29 05:11:59 2012] Off-axis axis estimate = 9.52'
[Fri Jun 29 05:44:21 2012] Using EEF radius (= 11.19 ")to estimate initial spatial extent for simple fitting
[Fri Jun 29 05:44:21 2012] Initial guess for spatial extent in simple fitting = 11.19"
[Fri Jun 29 05:44:21 2012] source mask rpix=2.6, npix_max = 37, mask sum = 36, frac = 0.954
[Fri Jun 29 05:44:21 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 11.19"
[Fri Jun 29 06:07:56 2012] fullrun_mos1_xmm0550061201_pi300-10000_cl_pass0_src5.ximg exists
[Fri Jun 29 06:07:56 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0550061201_pi300-10000_cl_pass0_src5.csv
[Fri Jun 29 06:07:56 2012] fullrun_mos1_xmm0550061201_pi300-10000_cl_pass0_src5_1.ximg exists
[Fri Jun 29 06:07:56 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0550061201_pi300-10000_cl_pass0_src5.csv
[Fri Jun 29 06:07:56 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0550061201_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0550061201_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 29 06:07:56 2012] fullrun_mos1_xmm0550061201_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Fri Jun 29 06:07:56 2012] fullrun_mos1_xmm0550061201_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Fri Jun 29 06:07:56 2012] Fit fullrun_mos1_xmm0550061201_pi300-10000_cl_pass0_tfrozen_src5 appears to have run properly
[Fri Jun 29 06:34:34 2012] Spatial fit model total counts = 134.999000, observed total counts = 135.000000
[Fri Jun 29 06:34:34 2012] Offset between fit and detection position for source 5 = 0.044174 pixels
[Fri Jun 29 06:34:34 2012] 135.859100 total counts/ 98.554100 bgd. counts: snr = 3.757766
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.044174 pixels
  Position = (173.0, 337.1) = 9 28 25.89 -6 3 3.7
  Extent = 4.7 (3.6-6.6)", rotation angle = 0
  Source counts = 37.3 +/- 11.7
  Background counts = 98.6
  Rate = 0.002 +/- 0.0007
[Fri Jun 29 06:34:34 2012] Vigneting correction estimate = 1.000000
[Fri Jun 29 06:34:34 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 29 06:34:34 2012] Assessing source extent using major axis lower bound
[Fri Jun 29 06:34:34 2012] Source does appear to be extended
[Fri Jun 29 06:34:34 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 29 07:08:26 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jun 29 07:08:26 2012] Initial guess for spatial extent in simple fitting = 4.68"
[Fri Jun 29 07:08:26 2012] source mask rpix=1.1, npix_max = 9, mask sum = 12, frac = 1.207
[Fri Jun 29 07:08:26 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 4.68"
[Fri Jun 29 07:26:58 2012] fullrun_mos1_xmm0550061201_pi300-10000_cl_pass1_src5.ximg exists
[Fri Jun 29 07:26:58 2012] fullrun_mos1_xmm0550061201_pi300-10000_cl_pass1_src5_1.ximg exists
[Fri Jun 29 07:26:58 2012] Fit fullrun_mos1_xmm0550061201_pi300-10000_cl_pass1_src5 appears to have run properly
[Fri Jun 29 07:26:58 2012] fullrun_mos1_xmm0550061201_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Fri Jun 29 07:26:58 2012] fullrun_mos1_xmm0550061201_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Fri Jun 29 07:26:58 2012] Fit fullrun_mos1_xmm0550061201_pi300-10000_cl_pass1_tfrozen_src5 appears to have run properly
[Fri Jun 29 07:51:36 2012] Warning, spatial fit 5 centroid is now closest to src. 3
[Fri Jun 29 07:51:36 2012] Vigneting correction estimate = 1.000000
[Fri Jun 29 07:51:36 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 29 07:51:36 2012] Assessing source extent using major axis lower bound
[Fri Jun 29 07:51:36 2012] Source does appear to be extended
[Fri Jun 29 07:51:36 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 29 08:17:18 2012] XMMSAS src. selection expression = ellipse(15004.768380, 29277.277000, 281.020208, 281.020208, 0.000000, X, Y)
[Fri Jun 29 08:17:18 2012] Writing source region out to fullrun_mos1_xmm0550061201_pi300-10000_pass1_cl_src5_src.reg
[Fri Jun 29 08:17:18 2012] Extracting stamp from image fullrun_mos1_xmm0550061201_pi300-10000_cl_sm2.00.img.gz, (157, 321) - (189, 353)
[Fri Jun 29 08:17:18 2012] XMMSAS bgd. selection expression = annulus(15004.768380, 29277.277000, 468.367013, 936.734027, X, Y)
[Fri Jun 29 08:17:18 2012] Writing fullrun_mos1_xmm0550061201_pi300-10000_pass1_cl_src5.gif
[Fri Jun 29 08:17:55 2012] Mean detx,y = (4253.30, -11269.78) 
[Fri Jun 29 08:17:55 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jun 29 08:18:01 2012] Binned source spectrum to 10 counts/bin
[Fri Jun 29 08:18:01 2012] Setting source spectrum file to fullrun_mos1_xmm0550061201_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Fri Jun 29 08:18:01 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0550061201_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Fri Jun 29 08:25:21 2012] Not generating rmf since there are only 37 counts
[Fri Jun 29 08:25:21 2012] rmf not generated due to insufficient counts
[Fri Jun 29 08:33:58 2012] Updating aperture counts using extracted products
[Fri Jun 29 08:33:58 2012] Error reading totcts from fullrun_mos1_xmm0550061201_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Fri Jun 29 08:33:58 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jun 29 08:33:58 2012] Using photon index=1.80, rate=0.00225, arf fullrun_mos1_xmm0550061201_pi300-10000_pass1_cl_src5.arf
[Fri Jun 29 08:33:58 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun 29 08:33:58 2012] Updating source flux to 7e-14
[Fri Jun 29 08:34:00 2012] Source 5 has fewer than 100.000000 counts, skipping spectral fitting