[Thu May  9 07:50:53 2013] Detection parameters:
  Position = (430.1, 264.1) = 9 27 6.42 -6 5 7.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 58.2 +/- 9.7
  Background counts = 5.9
  Rate = 0.004 +/- 0.0006

[Thu May  9 07:50:54 2013] Off-axis axis estimate = 9.86'
[Thu May  9 07:51:12 2013] Using EEF radius (= 11.36 ")to estimate initial spatial extent for simple fitting
[Thu May  9 07:51:12 2013] Initial guess for spatial extent in simple fitting = 11.36"
[Thu May  9 07:51:12 2013] source mask rpix=2.6, npix_max = 38, mask sum = 36, frac = 0.930
[Thu May  9 07:51:12 2013] Giving source the simple spatial ID 10 for pass 0, mean size = 11.36"
[Thu May  9 07:51:12 2013] fullrun_mos2_xmm0550061101_pi300-10000_cl_pass0_src10.ximg exists
[Thu May  9 07:51:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550061101_pi300-10000_cl_pass0_src10.csv
[Thu May  9 07:51:12 2013] fullrun_mos2_xmm0550061101_pi300-10000_cl_pass0_src10_1.ximg exists
[Thu May  9 07:51:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550061101_pi300-10000_cl_pass0_src10.csv
[Thu May  9 07:51:12 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0550061101_pi300-10000_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0550061101_pi300-10000_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  9 07:51:13 2013] fullrun_mos2_xmm0550061101_pi300-10000_cl_pass0_tfrozen_src10.ximg exists
[Thu May  9 07:51:13 2013] fullrun_mos2_xmm0550061101_pi300-10000_cl_pass0_tfrozen_src10_1.ximg exists
[Thu May  9 07:51:13 2013] Fit fullrun_mos2_xmm0550061101_pi300-10000_cl_pass0_tfrozen_src10 appears to have run properly
[Thu May  9 07:51:24 2013] Spatial fit model total counts = 89.710300, observed total counts = 88.000000
[Thu May  9 07:51:24 2013] Offset between fit and detection position for source 2 = 0.197561 pixels
[Thu May  9 07:51:24 2013] 89.480500 total counts/ 51.211200 bgd. counts: snr = 5.347712
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.197561 pixels
  Position = (429.9, 264.2) = 9 27 6.47 -6 5 7.0
  Extent = 4.5 (3.5-6.2)", rotation angle = 0
  Source counts = 38.3 +/- 9.5
  Background counts = 51.2
  Rate = 0.002 +/- 0.0006
[Thu May  9 07:51:24 2013] Vigneting correction estimate = 1.000000
[Thu May  9 07:51:24 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May  9 07:51:24 2013] Assessing source extent using major axis lower bound
[Thu May  9 07:51:24 2013] Source does appear to be extended
[Thu May  9 07:51:24 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May  9 07:51:34 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu May  9 07:51:34 2013] Initial guess for spatial extent in simple fitting = 4.54"
[Thu May  9 07:51:34 2013] source mask rpix=1.0, npix_max = 9, mask sum = 9, frac = 0.945
[Thu May  9 07:51:34 2013] Giving source the simple spatial ID 10 for pass 1, mean size = 4.54"
[Thu May  9 07:51:34 2013] fullrun_mos2_xmm0550061101_pi300-10000_cl_pass1_src10.ximg exists
[Thu May  9 07:51:34 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550061101_pi300-10000_cl_pass1_src10.csv
[Thu May  9 07:51:34 2013] fullrun_mos2_xmm0550061101_pi300-10000_cl_pass1_src10_1.ximg exists
[Thu May  9 07:51:34 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0550061101_pi300-10000_cl_pass1_src10.csv
[Thu May  9 07:51:34 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0550061101_pi300-10000_cl_pass1_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0550061101_pi300-10000_cl_pass1_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  9 07:51:35 2013] fullrun_mos2_xmm0550061101_pi300-10000_cl_pass1_tfrozen_src10.ximg exists
[Thu May  9 07:51:35 2013] fullrun_mos2_xmm0550061101_pi300-10000_cl_pass1_tfrozen_src10_1.ximg exists
[Thu May  9 07:51:35 2013] Fit fullrun_mos2_xmm0550061101_pi300-10000_cl_pass1_tfrozen_src10 appears to have run properly
[Thu May  9 07:51:45 2013] Warning, spatial fit 10 centroid is now closest to src. 18
[Thu May  9 07:51:45 2013] Vigneting correction estimate = 1.000000
[Thu May  9 07:51:45 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May  9 07:51:45 2013] Assessing source extent using major axis lower bound
[Thu May  9 07:51:45 2013] Source does appear to be extended
[Thu May  9 07:51:45 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May  9 08:18:54 2013] XMMSAS src. selection expression = ellipse(37351.270340, 22933.986400, 272.199008, 272.199008, 0.000000, X, Y)
[Thu May  9 08:18:54 2013] Writing source region out to fullrun_mos2_xmm0550061101_pi300-10000_pass1_cl_src2_src.reg
[Thu May  9 08:18:54 2013] Extracting stamp from image fullrun_mos2_xmm0550061101_pi300-10000_cl_sm2.00.img.gz, (414, 249) - (446, 280)
[Thu May  9 08:18:54 2013] XMMSAS bgd. selection expression = annulus(37351.270340, 22933.986400, 453.665013, 907.330026, X, Y)
[Thu May  9 08:18:54 2013] Writing fullrun_mos2_xmm0550061101_pi300-10000_pass1_cl_src2.gif
[Thu May  9 08:20:33 2013] Mean detx,y = (11451.98, 4229.05) 
[Thu May  9 08:20:34 2013] Setting backscal keywords in source and bgd. spectrum
[Thu May  9 08:20:41 2013] Binned source spectrum to 10 counts/bin
[Thu May  9 08:20:42 2013] Setting source spectrum file to fullrun_mos2_xmm0550061101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Thu May  9 08:20:42 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0550061101_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Thu May  9 08:24:16 2013] Not generating rmf since there are only 38 counts
[Thu May  9 08:24:16 2013] rmf not generated due to insufficient counts
[Thu May  9 08:29:40 2013] Updating aperture counts using extracted products
[Thu May  9 08:29:40 2013] Total counts from fullrun_mos2_xmm0550061101_pi300-10000_pass1_cl_src2_src_b10.pi.gz = 44.00
[Thu May  9 08:29:40 2013] Total counts from fullrun_mos2_xmm0550061101_pi300-10000_pass1_cl_src2_bgd.pi.gz = 46.00
[Thu May  9 08:29:40 2013] Got source and background scale factors 230400.000000, 1779292.000000
[Thu May  9 08:29:40 2013] User source parameters:
  Position = (429.9, 264.2) = 9 27 6.47 -6 5 7.0
  Extent = 4.5 (3.5-6.2)", rotation angle = 0
  Source aperture counts = 38.0 +/- 7.7
  Background aperture counts = 6.0
  Rate = 0.002 +/- 0.0005

[Thu May  9 08:29:42 2013] Calculating source flux in energy range 0.30-8.00
[Thu May  9 08:29:42 2013] Using photon index=1.80, rate=0.0023, arf fullrun_mos2_xmm0550061101_pi300-10000_pass1_cl_src2.arf
[Thu May  9 08:29:42 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May  9 08:29:42 2013] Updating source flux to 9.1e-14
[Thu May  9 08:29:44 2013] Source 2 has fewer than 100.000000 counts, skipping spectral fitting
[Thu May  9 08:29:45 2013] xmm0550061101/analysis//spectral/fullrun_mos2_xmm0550061101_pi300-10000_pass1_cl_src2_pl.csv not found, spectral fit skipped or did not complete