[Thu May  9 07:50:53 2013] Detection parameters:
  Position = (262.9, 155.0) = 9 27 55.17 -6 13 2.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 33.3 +/- 7.9
  Background counts = 5.9
  Rate = 0.004 +/- 0.0009

[Thu May  9 07:50:53 2013] Off-axis axis estimate = 10.71'
[Thu May  9 07:51:10 2013] Using EEF radius (= 11.79 ")to estimate initial spatial extent for simple fitting
[Thu May  9 07:51:10 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu May  9 07:51:10 2013] Initial guess for spatial extent in simple fitting = 11.79"
[Thu May  9 07:51:10 2013] source mask rpix=2.7, npix_max = 41, mask sum = 36, frac = 0.874
[Thu May  9 07:51:10 2013] Giving source the simple spatial ID 6 for pass 0, mean size = 11.79"
[Thu May  9 07:51:11 2013] fullrun_mos1_xmm0550061101_pi300-10000_cl_pass0_src6.ximg exists
[Thu May  9 07:51:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0550061101_pi300-10000_cl_pass0_src6.csv
[Thu May  9 07:51:11 2013] fullrun_mos1_xmm0550061101_pi300-10000_cl_pass0_src6_1.ximg exists
[Thu May  9 07:51:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0550061101_pi300-10000_cl_pass0_src6.csv
[Thu May  9 07:51:11 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0550061101_pi300-10000_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0550061101_pi300-10000_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  9 07:51:12 2013] fullrun_mos1_xmm0550061101_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Thu May  9 07:51:12 2013] fullrun_mos1_xmm0550061101_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Thu May  9 07:51:12 2013] Fit fullrun_mos1_xmm0550061101_pi300-10000_cl_pass0_tfrozen_src6 appears to have run properly
[Thu May  9 07:51:21 2013] Spatial fit model total counts = 79.467700, observed total counts = 80.000000
[Thu May  9 07:51:21 2013] Offset between fit and detection position for source 4 = 0.571769 pixels
[Thu May  9 07:51:21 2013] 79.484300 total counts/ 55.134200 bgd. counts: snr = 3.279368
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.571769 pixels
  Position = (263.5, 155.0) = 9 27 55.00 -6 13 1.8
  Extent = 5.4 (4.1-7.5)", rotation angle = 0
  Source counts = 24.4 +/- 8.9
  Background counts = 55.1
  Rate = 0.001 +/- 0.0005
[Thu May  9 07:51:21 2013] Vigneting correction estimate = 1.000000
[Thu May  9 07:51:21 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May  9 07:51:21 2013] Assessing source extent using major axis lower bound
[Thu May  9 07:51:21 2013] Source does appear to be extended
[Thu May  9 07:51:21 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May  9 07:51:33 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu May  9 07:51:33 2013] Initial guess for spatial extent in simple fitting = 5.36"
[Thu May  9 07:51:33 2013] source mask rpix=1.2, npix_max = 12, mask sum = 12, frac = 0.999
[Thu May  9 07:51:33 2013] Giving source the simple spatial ID 6 for pass 1, mean size = 5.36"
[Thu May  9 07:51:34 2013] fullrun_mos1_xmm0550061101_pi300-10000_cl_pass1_src6.ximg exists
[Thu May  9 07:51:34 2013] fullrun_mos1_xmm0550061101_pi300-10000_cl_pass1_src6_1.ximg exists
[Thu May  9 07:51:34 2013] Fit fullrun_mos1_xmm0550061101_pi300-10000_cl_pass1_src6 appears to have run properly
[Thu May  9 07:51:34 2013] fullrun_mos1_xmm0550061101_pi300-10000_cl_pass1_tfrozen_src6.ximg exists
[Thu May  9 07:51:34 2013] fullrun_mos1_xmm0550061101_pi300-10000_cl_pass1_tfrozen_src6_1.ximg exists
[Thu May  9 07:51:34 2013] Fit fullrun_mos1_xmm0550061101_pi300-10000_cl_pass1_tfrozen_src6 appears to have run properly
[Thu May  9 07:51:42 2013] Spatial fit model total counts = 70.249200, observed total counts = 70.000000
[Thu May  9 07:51:42 2013] Offset between fit and detection position for source 4 = 0.041822 pixels
[Thu May  9 07:51:42 2013] 70.900500 total counts/ 45.923800 bgd. counts: snr = 3.685667
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.041822 pixels
  Position = (263.5, 155.0) = 9 27 55.00 -6 13 2.0
  Extent = 5.4 (4.2-7.7)", rotation angle = 0
  Source counts = 25.0 +/- 8.4
  Background counts = 45.9
  Rate = 0.002 +/- 0.0005
[Thu May  9 07:51:42 2013] Vigneting correction estimate = 1.000000
[Thu May  9 07:51:42 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May  9 07:51:42 2013] Assessing source extent using major axis lower bound
[Thu May  9 07:51:42 2013] Source does appear to be extended
[Thu May  9 07:51:42 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May  9 08:12:28 2013] XMMSAS src. selection expression = ellipse(22877.453800, 13435.338400, 323.683209, 323.683209, 0.000000, X, Y)
[Thu May  9 08:12:28 2013] Writing source region out to fullrun_mos1_xmm0550061101_pi300-10000_pass1_cl_src4_src.reg
[Thu May  9 08:12:28 2013] Extracting stamp from image fullrun_mos1_xmm0550061101_pi300-10000_cl_sm2.00.img.gz, (245, 136) - (282, 174)
[Thu May  9 08:12:28 2013] XMMSAS bgd. selection expression = annulus(22877.453800, 13435.338400, 539.472016, 1078.944031, X, Y)
[Thu May  9 08:12:28 2013] Writing fullrun_mos1_xmm0550061101_pi300-10000_pass1_cl_src4.gif
[Thu May  9 08:13:17 2013] Mean detx,y = (9827.18, 4869.27) 
[Thu May  9 08:13:18 2013] Setting backscal keywords in source and bgd. spectrum
[Thu May  9 08:13:23 2013] Binned source spectrum to 10 counts/bin
[Thu May  9 08:13:23 2013] Setting source spectrum file to fullrun_mos1_xmm0550061101_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Thu May  9 08:13:23 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0550061101_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Thu May  9 08:18:21 2013] Not generating rmf since there are only 24 counts
[Thu May  9 08:18:21 2013] rmf not generated due to insufficient counts
[Thu May  9 08:29:37 2013] Updating aperture counts using extracted products
[Thu May  9 08:29:37 2013] Total counts from fullrun_mos1_xmm0550061101_pi300-10000_pass1_cl_src4_src_b10.pi.gz = 33.00
[Thu May  9 08:29:37 2013] Total counts from fullrun_mos1_xmm0550061101_pi300-10000_pass1_cl_src4_bgd.pi.gz = 86.00
[Thu May  9 08:29:38 2013] Got source and background scale factors 328000.000000, 2731980.000000
[Thu May  9 08:29:38 2013] User source parameters:
  Position = (263.5, 155.0) = 9 27 55.00 -6 13 2.0
  Extent = 5.4 (4.2-7.7)", rotation angle = 0
  Source aperture counts = 22.7 +/- 6.8
  Background aperture counts = 10.3
  Rate = 0.001 +/- 0.0004

[Thu May  9 08:29:38 2013] Calculating source flux in energy range 0.30-8.00
[Thu May  9 08:29:38 2013] Using photon index=1.80, rate=0.0015, arf fullrun_mos1_xmm0550061101_pi300-10000_pass1_cl_src4.arf
[Thu May  9 08:29:38 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May  9 08:29:38 2013] Updating source flux to 3.4e-14
[Thu May  9 08:29:43 2013] Source 4 has fewer than 100.000000 counts, skipping spectral fitting
[Thu May  9 08:29:44 2013] xmm0550061101/analysis//spectral/fullrun_mos1_xmm0550061101_pi300-10000_pass1_cl_src4_pl.csv not found, spectral fit skipped or did not complete