[Thu May  9 07:50:53 2013] Detection parameters:
  Position = (233.6, 325.1) = 9 28 3.71 -6 0 40.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 31.5 +/- 7.5
  Background counts = 7.1
  Rate = 0.003 +/- 0.0006

[Thu May  9 07:50:53 2013] Off-axis axis estimate = 5.08'
[Thu May  9 07:51:10 2013] Using EEF radius (= 8.97 ")to estimate initial spatial extent for simple fitting
[Thu May  9 07:51:10 2013] Initial guess for spatial extent in simple fitting = 8.97"
[Thu May  9 07:51:10 2013] source mask rpix=2.1, npix_max = 26, mask sum = 21, frac = 0.800
[Thu May  9 07:51:10 2013] Giving source the simple spatial ID 11 for pass 0, mean size = 8.97"
[Thu May  9 07:51:12 2013] fullrun_mos1_xmm0550061101_pi300-10000_cl_pass0_src11.ximg exists
[Thu May  9 07:51:12 2013] fullrun_mos1_xmm0550061101_pi300-10000_cl_pass0_src11_1.ximg exists
[Thu May  9 07:51:12 2013] Fit fullrun_mos1_xmm0550061101_pi300-10000_cl_pass0_src11 appears to have run properly
[Thu May  9 07:51:12 2013] fullrun_mos1_xmm0550061101_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Thu May  9 07:51:12 2013] fullrun_mos1_xmm0550061101_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Thu May  9 07:51:12 2013] Fit fullrun_mos1_xmm0550061101_pi300-10000_cl_pass0_tfrozen_src11 appears to have run properly
[Thu May  9 07:51:21 2013] Spatial fit model total counts = 102.863000, observed total counts = 99.000000
[Thu May  9 07:51:21 2013] Offset between fit and detection position for source 3 = 0.275735 pixels
[Thu May  9 07:51:21 2013] 105.438000 total counts/ 86.170600 bgd. counts: snr = 2.075599
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.275735 pixels
  Position = (233.5, 325.4) = 9 28 3.75 -6 0 40.8
  Extent = 3.3 (2.2-5.1)", rotation angle = 0
  Source counts = 19.3 +/- 10.3
  Background counts = 86.2
  Rate = 0.001 +/- 0.0006
[Thu May  9 07:51:21 2013] Vigneting correction estimate = 1.000000
[Thu May  9 07:51:21 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May  9 07:51:21 2013] Assessing source extent using major axis lower bound
[Thu May  9 07:51:21 2013] Source does appear to be extended
[Thu May  9 07:51:21 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May  9 07:51:33 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu May  9 07:51:33 2013] Initial guess for spatial extent in simple fitting = 3.30"
[Thu May  9 07:51:33 2013] source mask rpix=0.8, npix_max = 6, mask sum = 9, frac = 1.422
[Thu May  9 07:51:33 2013] Giving source the simple spatial ID 11 for pass 1, mean size = 3.30"
[Thu May  9 07:51:34 2013] fullrun_mos1_xmm0550061101_pi300-10000_cl_pass1_src11.ximg exists
[Thu May  9 07:51:34 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0550061101_pi300-10000_cl_pass1_src11.csv
[Thu May  9 07:51:34 2013] fullrun_mos1_xmm0550061101_pi300-10000_cl_pass1_src11_1.ximg exists
[Thu May  9 07:51:34 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0550061101_pi300-10000_cl_pass1_src11.csv
[Thu May  9 07:51:34 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0550061101_pi300-10000_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0550061101_pi300-10000_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  9 07:51:34 2013] fullrun_mos1_xmm0550061101_pi300-10000_cl_pass1_tfrozen_src11.ximg exists
[Thu May  9 07:51:34 2013] fullrun_mos1_xmm0550061101_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists
[Thu May  9 07:51:34 2013] Fit fullrun_mos1_xmm0550061101_pi300-10000_cl_pass1_tfrozen_src11 appears to have run properly
[Thu May  9 07:51:42 2013] Spatial fit model total counts = 102.758000, observed total counts = 99.000000
[Thu May  9 07:51:42 2013] Offset between fit and detection position for source 3 = 0.020499 pixels
[Thu May  9 07:51:42 2013] 105.355600 total counts/ 86.533200 bgd. counts: snr = 2.023409
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.020499 pixels
  Position = (233.5, 325.4) = 9 28 3.75 -6 0 40.9
  Extent = 3.2 (1.1-5.1)", rotation angle = 0
  Source counts = 18.8 +/- 10.3
  Background counts = 86.5
  Rate = 0.001 +/- 0.0006
[Thu May  9 07:51:42 2013] Vigneting correction estimate = 1.000000
[Thu May  9 07:51:42 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May  9 07:51:42 2013] Assessing source extent using major axis lower bound
[Thu May  9 07:51:42 2013] Source does appear to be extended
[Thu May  9 07:51:42 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May  9 08:12:28 2013] XMMSAS src. selection expression = ellipse(20263.318800, 28257.619400, 190.219205, 190.219205, 0.000000, X, Y)
[Thu May  9 08:12:28 2013] Writing source region out to fullrun_mos1_xmm0550061101_pi300-10000_pass1_cl_src3_src.reg
[Thu May  9 08:12:28 2013] Extracting stamp from image fullrun_mos1_xmm0550061101_pi300-10000_cl_sm2.00.img.gz, (223, 314) - (244, 336)
[Thu May  9 08:12:28 2013] XMMSAS bgd. selection expression = annulus(20263.318800, 28257.619400, 317.032009, 634.064018, X, Y)
[Thu May  9 08:12:28 2013] Writing fullrun_mos1_xmm0550061101_pi300-10000_pass1_cl_src3.gif
[Thu May  9 08:14:03 2013] Mean detx,y = (-5157.61, 3458.65) 
[Thu May  9 08:14:04 2013] Setting backscal keywords in source and bgd. spectrum
[Thu May  9 08:14:10 2013] Binned source spectrum to 10 counts/bin
[Thu May  9 08:14:10 2013] Setting source spectrum file to fullrun_mos1_xmm0550061101_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Thu May  9 08:14:10 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0550061101_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Thu May  9 08:18:45 2013] Not generating rmf since there are only 18 counts
[Thu May  9 08:18:45 2013] rmf not generated due to insufficient counts
[Thu May  9 08:29:38 2013] Updating aperture counts using extracted products
[Thu May  9 08:29:38 2013] Total counts from fullrun_mos1_xmm0550061101_pi300-10000_pass1_cl_src3_src_b10.pi.gz = 23.00
[Thu May  9 08:29:38 2013] Total counts from fullrun_mos1_xmm0550061101_pi300-10000_pass1_cl_src3_bgd.pi.gz = 35.00
[Thu May  9 08:29:38 2013] Got source and background scale factors 110400.000000, 830368.000000
[Thu May  9 08:29:38 2013] User source parameters:
  Position = (233.5, 325.4) = 9 28 3.75 -6 0 40.9
  Extent = 3.2 (1.1-5.1)", rotation angle = 0
  Source aperture counts = 18.3 +/- 5.9
  Background aperture counts = 4.7
  Rate = 0.001 +/- 0.0004

[Thu May  9 08:29:39 2013] Calculating source flux in energy range 0.30-8.00
[Thu May  9 08:29:39 2013] Using photon index=1.80, rate=0.00113, arf fullrun_mos1_xmm0550061101_pi300-10000_pass1_cl_src3.arf
[Thu May  9 08:29:39 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May  9 08:29:39 2013] Updating source flux to 2.3e-14
[Thu May  9 08:29:43 2013] Source 3 has fewer than 100.000000 counts, skipping spectral fitting
[Thu May  9 08:29:44 2013] xmm0550061101/analysis//spectral/fullrun_mos1_xmm0550061101_pi300-10000_pass1_cl_src3_pl.csv not found, spectral fit skipped or did not complete