[Thu May  9 07:50:53 2013] Detection parameters:
  Position = (292.0, 275.7) = 9 27 46.69 -6 4 17.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 692.9 +/- 31.7
  Background counts = 6.9
  Rate = 0.04 +/- 0.002

[Thu May  9 07:50:53 2013] Off-axis axis estimate = 1.71'
[Thu May  9 07:51:10 2013] Using EEF radius (= 7.28 ")to estimate initial spatial extent for simple fitting
[Thu May  9 07:51:10 2013] Initial guess for spatial extent in simple fitting = 7.28"
[Thu May  9 07:51:10 2013] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.846
[Thu May  9 07:51:10 2013] Giving source the simple spatial ID 1 for pass 0, mean size = 7.28"
[Thu May  9 07:51:11 2013] fullrun_mos1_xmm0550061101_pi300-10000_cl_pass0_src1.ximg exists
[Thu May  9 07:51:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0550061101_pi300-10000_cl_pass0_src1.csv
[Thu May  9 07:51:11 2013] fullrun_mos1_xmm0550061101_pi300-10000_cl_pass0_src1_1.ximg exists
[Thu May  9 07:51:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0550061101_pi300-10000_cl_pass0_src1.csv
[Thu May  9 07:51:11 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0550061101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0550061101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  9 07:51:12 2013] fullrun_mos1_xmm0550061101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Thu May  9 07:51:12 2013] fullrun_mos1_xmm0550061101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Thu May  9 07:51:12 2013] Fit fullrun_mos1_xmm0550061101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Thu May  9 07:51:21 2013] Spatial fit model total counts = 680.000000, observed total counts = 680.000000
[Thu May  9 07:51:21 2013] Offset between fit and detection position for source 1 = 0.213696 pixels
[Thu May  9 07:51:21 2013] 679.318000 total counts/ 197.855000 bgd. counts: snr = 34.228621
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.213696 pixels
  Position = (292.0, 275.5) = 9 27 46.69 -6 4 17.7
  Extent = 5.7 (5.2-6.1)", rotation angle = 0
  Source counts = 481.5 +/- 26.1
  Background counts = 197.9
  Rate = 0.03 +/- 0.002
[Thu May  9 07:51:21 2013] Vigneting correction estimate = 1.000000
[Thu May  9 07:51:21 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May  9 07:51:21 2013] Assessing source extent using major axis lower bound
[Thu May  9 07:51:21 2013] Source does appear to be extended
[Thu May  9 07:51:21 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May  9 07:51:33 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu May  9 07:51:33 2013] Initial guess for spatial extent in simple fitting = 5.66"
[Thu May  9 07:51:33 2013] source mask rpix=1.3, npix_max = 12, mask sum = 12, frac = 0.924
[Thu May  9 07:51:33 2013] Giving source the simple spatial ID 1 for pass 1, mean size = 5.66"
[Thu May  9 07:51:34 2013] fullrun_mos1_xmm0550061101_pi300-10000_cl_pass1_src1.ximg exists
[Thu May  9 07:51:34 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0550061101_pi300-10000_cl_pass1_src1.csv
[Thu May  9 07:51:34 2013] fullrun_mos1_xmm0550061101_pi300-10000_cl_pass1_src1_1.ximg exists
[Thu May  9 07:51:34 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0550061101_pi300-10000_cl_pass1_src1.csv
[Thu May  9 07:51:34 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0550061101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0550061101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  9 07:51:34 2013] fullrun_mos1_xmm0550061101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Thu May  9 07:51:34 2013] fullrun_mos1_xmm0550061101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Thu May  9 07:51:34 2013] Fit fullrun_mos1_xmm0550061101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Thu May  9 07:51:42 2013] Spatial fit model total counts = 675.938000, observed total counts = 677.000000
[Thu May  9 07:51:42 2013] Offset between fit and detection position for source 1 = 0.014005 pixels
[Thu May  9 07:51:42 2013] 677.191000 total counts/ 191.426000 bgd. counts: snr = 35.109590
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.014005 pixels
  Position = (292.0, 275.5) = 9 27 46.69 -6 4 17.7
  Extent = 5.7 (5.3-6.2)", rotation angle = 0
  Source counts = 485.8 +/- 26.0
  Background counts = 191.4
  Rate = 0.03 +/- 0.002
[Thu May  9 07:51:42 2013] Vigneting correction estimate = 1.000000
[Thu May  9 07:51:42 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May  9 07:51:42 2013] Assessing source extent using major axis lower bound
[Thu May  9 07:51:42 2013] Source does appear to be extended
[Thu May  9 07:51:42 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May  9 08:12:28 2013] XMMSAS src. selection expression = ellipse(25354.719264, 23921.130200, 344.668810, 344.668810, 0.000000, X, Y)
[Thu May  9 08:12:28 2013] Writing source region out to fullrun_mos1_xmm0550061101_pi300-10000_pass1_cl_src1_src.reg
[Thu May  9 08:12:28 2013] Extracting stamp from image fullrun_mos1_xmm0550061101_pi300-10000_cl_sm2.00.img.gz, (272, 256) - (312, 295)
[Thu May  9 08:12:28 2013] XMMSAS bgd. selection expression = annulus(25354.719264, 23921.130200, 574.448017, 1148.896033, X, Y)
[Thu May  9 08:12:28 2013] Writing fullrun_mos1_xmm0550061101_pi300-10000_pass1_cl_src1.gif
[Thu May  9 08:12:30 2013] Mean detx,y = (367.70, -298.32) 
[Thu May  9 08:12:31 2013] Setting backscal keywords in source and bgd. spectrum
[Thu May  9 08:12:37 2013] Binned source spectrum to 10 counts/bin
[Thu May  9 08:12:37 2013] Setting source spectrum file to fullrun_mos1_xmm0550061101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu May  9 08:12:37 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0550061101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Thu May  9 08:29:37 2013] Updating aperture counts using extracted products
[Thu May  9 08:29:37 2013] Total counts from fullrun_mos1_xmm0550061101_pi300-10000_pass1_cl_src1_src_b10.pi.gz = 527.00
[Thu May  9 08:29:37 2013] Total counts from fullrun_mos1_xmm0550061101_pi300-10000_pass1_cl_src1_bgd.pi.gz = 168.00
[Thu May  9 08:29:37 2013] Got source and background scale factors 372800.000000, 3113600.000000
[Thu May  9 08:29:37 2013] User source parameters:
  Position = (292.0, 275.5) = 9 27 46.69 -6 4 17.7
  Extent = 5.7 (5.3-6.2)", rotation angle = 0
  Source aperture counts = 506.9 +/- 24.0
  Background aperture counts = 20.1
  Rate = 0.03 +/- 0.001

[Thu May  9 08:29:38 2013] Calculating source flux in energy range 0.30-8.00
[Thu May  9 08:29:38 2013] Using photon index=1.80, rate=0.0292, arf fullrun_mos1_xmm0550061101_pi300-10000_pass1_cl_src1.arf
[Thu May  9 08:29:38 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May  9 08:29:38 2013] Updating source flux to 4.1e-13
[Thu May  9 08:29:44 2013] xmm0550061101/analysis//spectral/fullrun_mos1_xmm0550061101_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete