[Fri Aug 24 08:07:19 2012] Detection parameters:
  Position = (242.8, 275.2) = 14 40 1.80 -60 50 17.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 86.6 +/- 12.0
  Background counts = 7.5
  Rate = 0.007 +/- 0.001

[Fri Aug 24 08:07:19 2012] Off-axis axis estimate = 4.37'
[Fri Aug 24 08:21:52 2012] Using EEF radius (= 8.61 ")to estimate initial spatial extent for simple fitting
[Fri Aug 24 08:21:52 2012] Initial guess for spatial extent in simple fitting = 8.61"
[Fri Aug 24 08:21:52 2012] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.016
[Fri Aug 24 08:21:52 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 8.61"
[Fri Aug 24 08:30:10 2012] fullrun_mos1_xmm0550061001_pi300-10000_cl_pass0_src3.ximg exists
[Fri Aug 24 08:30:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0550061001_pi300-10000_cl_pass0_src3.csv
[Fri Aug 24 08:30:10 2012] fullrun_mos1_xmm0550061001_pi300-10000_cl_pass0_src3_1.ximg exists
[Fri Aug 24 08:30:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0550061001_pi300-10000_cl_pass0_src3.csv
[Fri Aug 24 08:30:10 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0550061001_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0550061001_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 24 08:30:10 2012] fullrun_mos1_xmm0550061001_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Fri Aug 24 08:30:10 2012] fullrun_mos1_xmm0550061001_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Fri Aug 24 08:30:10 2012] Fit fullrun_mos1_xmm0550061001_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Fri Aug 24 08:41:44 2012] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 2 at 11.251127 pixels away
[Fri Aug 24 08:41:44 2012] Vigneting correction estimate = 1.000000
[Fri Aug 24 08:41:44 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 24 08:41:44 2012] Assessing source extent using major
[Fri Aug 24 08:41:44 2012] Source does appear to be extended
[Fri Aug 24 08:41:44 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 24 08:51:11 2012] Using EEF radius (= 8.61 ")to estimate initial spatial extent for simple fitting
[Fri Aug 24 08:51:11 2012] Initial guess for spatial extent in simple fitting = 8.61"
[Fri Aug 24 08:51:11 2012] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.016
[Fri Aug 24 08:51:11 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 8.61"
[Fri Aug 24 08:56:25 2012] fullrun_mos1_xmm0550061001_pi300-10000_cl_pass1_src3.ximg exists
[Fri Aug 24 08:56:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0550061001_pi300-10000_cl_pass1_src3.csv
[Fri Aug 24 08:56:25 2012] fullrun_mos1_xmm0550061001_pi300-10000_cl_pass1_src3_1.ximg exists
[Fri Aug 24 08:56:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0550061001_pi300-10000_cl_pass1_src3.csv
[Fri Aug 24 08:56:25 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0550061001_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0550061001_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 24 08:56:25 2012] fullrun_mos1_xmm0550061001_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Fri Aug 24 08:56:25 2012] fullrun_mos1_xmm0550061001_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Fri Aug 24 08:56:25 2012] Fit fullrun_mos1_xmm0550061001_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Fri Aug 24 09:10:51 2012] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 2 at 56.549536 pixels away
[Fri Aug 24 09:10:51 2012] Spatial fit model total counts = 152.000000, observed total counts = 152.000000
[Fri Aug 24 09:10:51 2012] Offset between fit and detection position for source 2 = 0.133254 pixels
[Fri Aug 24 09:10:51 2012] 152.130800 total counts/ 89.718900 bgd. counts: snr = 6.589090
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.133254 pixels
  Position = (242.8, 275.3) = 14 40 1.84 -60 50 18.8
  Extent = 5.8 (4.6-7.6)", rotation angle = 0
  Source counts = 62.4 +/- 12.3
  Background counts = 89.7
  Rate = 0.005 +/- 0.0009
[Fri Aug 24 09:10:51 2012] Vigneting correction estimate = 1.000000
[Fri Aug 24 09:10:51 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 24 09:10:51 2012] Assessing source extent using major axis lower bound
[Fri Aug 24 09:10:51 2012] Source does appear to be extended
[Fri Aug 24 09:10:51 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 24 09:15:39 2012] XMMSAS src. selection expression = ellipse(21072.666200, 23901.731400, 345.455410, 345.455410, 0.000000, X, Y)
[Fri Aug 24 09:15:39 2012] Writing source region out to fullrun_mos1_xmm0550061001_pi300-10000_pass1_cl_src2_src.reg
[Fri Aug 24 09:15:39 2012] Extracting stamp from image fullrun_mos1_xmm0550061001_pi300-10000_cl_sm2.00.img.gz, (223, 255) - (263, 295)
[Fri Aug 24 09:15:39 2012] XMMSAS bgd. selection expression = annulus(21072.666200, 23901.731400, 575.759017, 1151.518033, X, Y) && !ellipse(20235.824260, 22666.753600, 235.287207, 235.287207, 0.000000, X, Y)
[Fri Aug 24 09:15:39 2012] Writing fullrun_mos1_xmm0550061001_pi300-10000_pass1_cl_src2.gif
[Fri Aug 24 09:16:18 2012] Mean detx,y = (-193.66, 3738.03) 
[Fri Aug 24 09:16:19 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Aug 24 09:16:25 2012] grppha failed
[Fri Aug 24 09:16:25 2012] Setting source spectrum file to fullrun_mos1_xmm0550061001_pi300-10000_pass1_cl_src2_src.pi.gz
[Fri Aug 24 09:16:25 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0550061001_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Fri Aug 24 09:16:33 2012] Not generating rmf since there are only 62 counts
[Fri Aug 24 09:16:33 2012] rmf not generated due to insufficient counts
[Fri Aug 24 09:18:06 2012] Updating aperture counts using extracted products
[Fri Aug 24 09:18:06 2012] Error reading totcts from fullrun_mos1_xmm0550061001_pi300-10000_pass1_cl_src2_src.pi.gz
[Fri Aug 24 09:18:06 2012] No arf file for this source, not re-computing flux
[Fri Aug 24 09:18:07 2012] Source 2 has fewer than 100.000000 counts, skipping spectral fitting
[Fri Aug 24 09:18:08 2012] xmm0550061001/analysis//spectral/fullrun_mos1_xmm0550061001_pi300-10000_pass1_cl_src2_pl.csv not found, spectral fit skipped or did not complete