[Tue Mar 20 01:56:26 2012] Detection parameters:
  Position = (403.4, 169.8) = 15 0 30.00 -11 0 8.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 37.8 +/- 10.3
  Background counts = 20.5
  Rate = 0.002 +/- 0.0004

[Tue Mar 20 01:56:26 2012] Off-axis axis estimate = 12.04'
[Tue Mar 20 02:28:56 2012] Using EEF radius (= 12.45 ")to estimate initial spatial extent for simple fitting
[Tue Mar 20 02:28:56 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Mar 20 02:28:56 2012] Initial guess for spatial extent in simple fitting = 12.45"
[Tue Mar 20 02:28:56 2012] source mask rpix=2.9, npix_max = 45, mask sum = 49, frac = 1.084
[Tue Mar 20 02:28:56 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 12.45"
[Tue Mar 20 02:40:29 2012] fullrun_mos2_xmm0511581401_pi300-10000_cl_pass0_src5.ximg exists
[Tue Mar 20 02:40:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0511581401_pi300-10000_cl_pass0_src5.csv
[Tue Mar 20 02:40:29 2012] fullrun_mos2_xmm0511581401_pi300-10000_cl_pass0_src5_1.ximg exists
[Tue Mar 20 02:40:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0511581401_pi300-10000_cl_pass0_src5.csv
[Tue Mar 20 02:40:29 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0511581401_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0511581401_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 20 02:40:29 2012] fullrun_mos2_xmm0511581401_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Tue Mar 20 02:40:29 2012] fullrun_mos2_xmm0511581401_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Tue Mar 20 02:40:29 2012] Fit fullrun_mos2_xmm0511581401_pi300-10000_cl_pass0_tfrozen_src5 appears to have run properly
[Tue Mar 20 02:40:38 2012] Spatial fit model total counts = 180.451000, observed total counts = 175.000000
[Tue Mar 20 02:40:38 2012] Offset between fit and detection position for source 3 = 0.631216 pixels
[Tue Mar 20 02:40:38 2012] 181.716600 total counts/ 168.140000 bgd. counts: snr = 1.047021
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.631216 pixels
  Position = (403.7, 170.4) = 15 0 29.93 -11 0 7.9
  Extent = 3.4 (3.1-6.0)", rotation angle = 0
  Source counts = 13.6 +/- 13.5
  Background counts = 168.1
  Rate = 0.0006 +/- 0.0006
  Deleting source due to low Poisson probability