[Mon Feb 27 10:39:29 2012] Detection parameters:
  Position = (186.0, 318.1) = 15 1 32.21 -10 50 3.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 55.0 +/- 14.3
  Background counts = 65.6
  Rate = 0.005 +/- 0.001

[Mon Feb 27 10:39:29 2012] Off-axis axis estimate = 8.28'
[Mon Feb 27 10:59:27 2012] Using EEF radius (= 10.57 ")to estimate initial spatial extent for simple fitting
[Mon Feb 27 10:59:27 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Feb 27 10:59:27 2012] Initial guess for spatial extent in simple fitting = 10.57"
[Mon Feb 27 10:59:27 2012] source mask rpix=2.4, npix_max = 34, mask sum = 36, frac = 1.049
[Mon Feb 27 10:59:27 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 10.57"
[Mon Feb 27 11:08:23 2012] fullrun_mos2_xmm0511581301_pi300-10000_cl_pass0_src1.ximg exists
[Mon Feb 27 11:08:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0511581301_pi300-10000_cl_pass0_src1.csv
[Mon Feb 27 11:08:23 2012] fullrun_mos2_xmm0511581301_pi300-10000_cl_pass0_src1_1.ximg exists
[Mon Feb 27 11:08:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0511581301_pi300-10000_cl_pass0_src1.csv
[Mon Feb 27 11:08:23 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0511581301_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0511581301_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Feb 27 11:08:23 2012] fullrun_mos2_xmm0511581301_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Mon Feb 27 11:08:23 2012] fullrun_mos2_xmm0511581301_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Mon Feb 27 11:08:23 2012] Fit fullrun_mos2_xmm0511581301_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Mon Feb 27 11:08:29 2012] Spatial fit model total counts = 200.474000, observed total counts = 202.000000
[Mon Feb 27 11:08:29 2012] Offset between fit and detection position for source 4 = 5.713962 pixels
[Mon Feb 27 11:08:29 2012] 193.321300 total counts/ 127.969000 bgd. counts: snr = 5.777081
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 5.713962 pixels
  Position = (191.5, 316.5) = 15 1 30.59 -10 50 10.0
  Extent = 21.1 (21.1-42.3)", rotation angle = 0
  Source counts = 65.4 +/- 13.9
  Background counts = 128.0
  Rate = 0.006 +/- 0.001
[Mon Feb 27 11:08:29 2012] Vigneting correction estimate = 1.000000
[Mon Feb 27 11:08:29 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Feb 27 11:08:29 2012] Assessing source extent using major axis lower bound
[Mon Feb 27 11:08:29 2012] Source does appear to be extended
[Mon Feb 27 11:08:29 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Feb 27 11:23:58 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Feb 27 11:23:58 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Feb 27 11:23:58 2012] Initial guess for spatial extent in simple fitting = 21.13"
[Mon Feb 27 11:23:58 2012] source mask rpix=4.9, npix_max = 114, mask sum = 120, frac = 1.045
[Mon Feb 27 11:23:58 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 21.13"
[Mon Feb 27 11:33:25 2012] fullrun_mos2_xmm0511581301_pi300-10000_cl_pass1_src1.ximg exists
[Mon Feb 27 11:33:25 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0511581301_pi300-10000_cl_pass1_src1.csv
[Mon Feb 27 11:33:25 2012] fullrun_mos2_xmm0511581301_pi300-10000_cl_pass1_src1_1.ximg exists
[Mon Feb 27 11:33:25 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0511581301_pi300-10000_cl_pass1_src1.csv
[Mon Feb 27 11:33:25 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0511581301_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0511581301_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Feb 27 11:33:25 2012] fullrun_mos2_xmm0511581301_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Mon Feb 27 11:33:25 2012] fullrun_mos2_xmm0511581301_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Mon Feb 27 11:33:25 2012] Fit fullrun_mos2_xmm0511581301_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Mon Feb 27 11:33:31 2012] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 4 at 19.272858 pixels away
[Mon Feb 27 11:33:31 2012] Vigneting correction estimate = 1.000000
[Mon Feb 27 11:33:31 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Feb 27 11:33:31 2012] Assessing source extent using major axis lower bound
[Mon Feb 27 11:33:31 2012] Source does appear to be extended
[Mon Feb 27 11:33:31 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Feb 27 11:50:28 2012] XMMSAS src. selection expression = ellipse(16610.970000, 27487.905000, 1267.938036, 1267.938036, 0.000000, X, Y)
[Mon Feb 27 11:50:28 2012] Writing source region out to fullrun_mos2_xmm0511581301_pi300-10000_pass1_cl_src4_src.reg
[Mon Feb 27 11:50:28 2012] Extracting stamp from image fullrun_mos2_xmm0511581301_pi300-10000_cl_sm2.00.img.gz, (119, 244) - (264, 389)
[Mon Feb 27 11:50:28 2012] XMMSAS bgd. selection expression = annulus(16610.970000, 27487.905000, 2113.230061, 4226.460122, X, Y)
[Mon Feb 27 11:50:28 2012] Writing fullrun_mos2_xmm0511581301_pi300-10000_pass1_cl_src4.gif
[Mon Feb 27 11:56:10 2012] Mean detx,y = (-7264.63, -5852.98) 
[Mon Feb 27 11:56:12 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Feb 27 11:57:52 2012] Binned source spectrum to 10 counts/bin
[Mon Feb 27 11:57:53 2012] Setting source spectrum file to fullrun_mos2_xmm0511581301_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Mon Feb 27 11:57:53 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0511581301_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Mon Feb 27 12:00:23 2012] Not generating rmf since there are only 65 counts
[Mon Feb 27 12:00:23 2012] rmf not generated due to insufficient counts
[Mon Feb 27 12:03:05 2012] Updating aperture counts using extracted products
[Mon Feb 27 12:03:05 2012] Error reading totcts from fullrun_mos2_xmm0511581301_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Mon Feb 27 12:03:05 2012] Calculating source flux in energy range 0.30-8.00
[Mon Feb 27 12:03:05 2012] Using photon index=1.80, rate=0.00551, arf fullrun_mos2_xmm0511581301_pi300-10000_pass1_cl_src4.arf
[Mon Feb 27 12:03:05 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Feb 27 12:03:05 2012] Updating source flux to 7.4e-14
[Mon Feb 27 12:03:20 2012] Source 4 has fewer than 100.000000 counts, skipping spectral fitting
[Mon Feb 27 12:03:21 2012] xmm0511581301/analysis//spectral/fullrun_mos2_xmm0511581301_pi300-10000_pass1_cl_src4_pl.csv not found, spectral fit skipped or did not complete