[Sun Mar 18 10:51:30 2012] Detection parameters:
  Position = (334.0, 306.5) = 7 8 36.21 -49 32 22.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 188.7 +/- 34.4
  Background counts = 223.4
  Rate = 0.002 +/- 0.0004

[Sun Mar 18 10:51:32 2012] Off-axis axis estimate = 2.64'
[Sun Mar 18 11:02:36 2012] Using EEF radius (= 7.75 ")to estimate initial spatial extent for simple fitting
[Sun Mar 18 11:02:36 2012] Initial guess for spatial extent in simple fitting = 7.75"
[Sun Mar 18 11:02:36 2012] source mask rpix=1.8, npix_max = 20, mask sum = 19, frac = 0.913
[Sun Mar 18 11:02:36 2012] Giving source the simple spatial ID 28 for pass 0, mean size = 7.75"
[Sun Mar 18 13:11:44 2012] fullrun_pn_xmm0511580401_pi300-10000_cl_pass0_src28.ximg exists
[Sun Mar 18 13:11:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0511580401_pi300-10000_cl_pass0_src28.csv
[Sun Mar 18 13:11:44 2012] fullrun_pn_xmm0511580401_pi300-10000_cl_pass0_src28_1.ximg exists
[Sun Mar 18 13:11:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0511580401_pi300-10000_cl_pass0_src28.csv
[Sun Mar 18 13:11:44 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0511580401_pi300-10000_cl_pass0_src28_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0511580401_pi300-10000_cl_pass0_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Mar 18 13:11:45 2012] fullrun_pn_xmm0511580401_pi300-10000_cl_pass0_tfrozen_src28.ximg exists
[Sun Mar 18 13:11:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0511580401_pi300-10000_cl_pass0_tfrozen_src28.csv
[Sun Mar 18 13:11:45 2012] fullrun_pn_xmm0511580401_pi300-10000_cl_pass0_tfrozen_src28_1.ximg exists
[Sun Mar 18 13:11:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0511580401_pi300-10000_cl_pass0_tfrozen_src28.csv
[Sun Mar 18 13:11:45 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0511580401_pi300-10000_cl_pass0_tfrozen_src28_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0511580401_pi300-10000_cl_pass0_tfrozen_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Mar 18 15:01:57 2012] Warning, spatial fit 28 centroid is now closest to src. 32
[Sun Mar 18 15:01:57 2012] Vigneting correction estimate = 1.000000
[Sun Mar 18 15:01:57 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Mar 18 15:01:57 2012] Assessing source extent using major
[Sun Mar 18 15:01:57 2012] Source does appear to be extended
[Sun Mar 18 15:01:57 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Mar 18 15:02:28 2012] Using EEF radius (= 7.75 ")to estimate initial spatial extent for simple fitting
[Sun Mar 18 15:02:28 2012] Initial guess for spatial extent in simple fitting = 7.75"
[Sun Mar 18 15:02:28 2012] source mask rpix=1.8, npix_max = 20, mask sum = 19, frac = 0.913
[Sun Mar 18 15:02:28 2012] Giving source the simple spatial ID 28 for pass 1, mean size = 7.75"
[Sun Mar 18 20:24:03 2012] fullrun_pn_xmm0511580401_pi300-10000_cl_pass1_src28.ximg exists
[Sun Mar 18 20:24:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0511580401_pi300-10000_cl_pass1_src28.csv
[Sun Mar 18 20:24:03 2012] fullrun_pn_xmm0511580401_pi300-10000_cl_pass1_src28_1.ximg exists
[Sun Mar 18 20:24:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0511580401_pi300-10000_cl_pass1_src28.csv
[Sun Mar 18 20:24:03 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0511580401_pi300-10000_cl_pass1_src28_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0511580401_pi300-10000_cl_pass1_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Mar 18 20:24:03 2012] fullrun_pn_xmm0511580401_pi300-10000_cl_pass1_tfrozen_src28.ximg exists
[Sun Mar 18 20:24:03 2012] fullrun_pn_xmm0511580401_pi300-10000_cl_pass1_tfrozen_src28_1.ximg exists
[Sun Mar 18 20:24:03 2012] Fit fullrun_pn_xmm0511580401_pi300-10000_cl_pass1_tfrozen_src28 appears to have run properly
[Sun Mar 18 21:47:51 2012] Source 30 is offset by 7.088553 and 6.597738 pixels which is larger than
2 X fitted extent = 1.810681 x 1.810681, not incorporating fit results
[Sun Mar 18 21:47:51 2012] Vigneting correction estimate = 1.000000
[Sun Mar 18 21:47:51 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Mar 18 21:47:51 2012] Assessing source extent using major
[Sun Mar 18 21:47:51 2012] Source does appear to be extended
[Sun Mar 18 21:47:51 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Mar 18 21:48:21 2012] XMMSAS src. selection expression = ellipse(29006.290070, 26614.589233, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Mar 18 21:48:21 2012] Writing source region out to fullrun_pn_xmm0511580401_pi300-10000_pass1_cl_src30_src.reg
[Sun Mar 18 21:48:21 2012] Extracting stamp from image fullrun_pn_xmm0511580401_pi300-10000_cl_sm2.00.img.gz, (296, 269) - (371, 344)
[Sun Mar 18 21:48:21 2012] XMMSAS bgd. selection expression = annulus(29006.290070, 26614.589233, 1087.500000, 2175.000000, X, Y) && !ellipse(28000.192600, 25795.570200, 1534.132844, 1534.132844, 0.000000, X, Y) && !ellipse(31347.489594, 27937.656708, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28035.831726, 27921.856628, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28503.597443, 27051.692017, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31212.218506, 26595.674805, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29594.779968, 25747.382324, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Mar 18 21:48:21 2012] Writing fullrun_pn_xmm0511580401_pi300-10000_pass1_cl_src30.gif
[Sun Mar 18 22:53:56 2012] Mean detx,y = (-16.49, -1426.24) 
[Sun Mar 18 22:54:03 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Mar 18 22:54:29 2012] Binned source spectrum to 10 counts/bin
[Sun Mar 18 22:54:29 2012] Setting source spectrum file to fullrun_pn_xmm0511580401_pi300-10000_pass1_cl_src30_src_b10.pi.gz
[Sun Mar 18 22:54:29 2012] Setting bgd. spectrum file to fullrun_pn_xmm0511580401_pi300-10000_pass1_cl_src30_bgd.pi.gz
[Mon Mar 19 00:33:17 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Mar 19 00:33:17 2012] rmf not generated due to insufficient counts
[Mon Mar 19 02:39:16 2012] Updating aperture counts using extracted products
[Mon Mar 19 02:39:16 2012] Error reading totcts from fullrun_pn_xmm0511580401_pi300-10000_pass1_cl_src30_src_b10.pi.gz
[Mon Mar 19 02:39:18 2012] Calculating source flux in energy range 0.30-8.00
[Mon Mar 19 02:39:18 2012] Using photon index=1.80, rate=0.00224, arf fullrun_pn_xmm0511580401_pi300-10000_pass1_cl_src30.arf
[Mon Mar 19 02:39:18 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Mar 19 02:39:18 2012] Updating source flux to 6.2e-15
[Mon Mar 19 02:41:04 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting