[Sun Mar 18 10:51:29 2012] Detection parameters:
  Position = (400.3, 314.8) = 7 8 6.58 -49 31 49.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 418.9 +/- 30.8
  Background counts = 191.3
  Rate = 0.006 +/- 0.0005

[Sun Mar 18 10:51:32 2012] Off-axis axis estimate = 7.48'
[Sun Mar 18 11:02:36 2012] Using EEF radius (= 10.17 ")to estimate initial spatial extent for simple fitting
[Sun Mar 18 11:02:36 2012] Initial guess for spatial extent in simple fitting = 10.17"
[Sun Mar 18 11:02:36 2012] source mask rpix=2.3, npix_max = 32, mask sum = 36, frac = 1.118
[Sun Mar 18 11:02:36 2012] Giving source the simple spatial ID 26 for pass 0, mean size = 10.17"
[Sun Mar 18 13:11:44 2012] fullrun_pn_xmm0511580401_pi300-10000_cl_pass0_src26.ximg exists
[Sun Mar 18 13:11:44 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0511580401_pi300-10000_cl_pass0_src26.csv
[Sun Mar 18 13:11:44 2012] fullrun_pn_xmm0511580401_pi300-10000_cl_pass0_src26_1.ximg exists
[Sun Mar 18 13:11:44 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0511580401_pi300-10000_cl_pass0_src26.csv
[Sun Mar 18 13:11:44 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0511580401_pi300-10000_cl_pass0_src26_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0511580401_pi300-10000_cl_pass0_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Mar 18 13:11:45 2012] fullrun_pn_xmm0511580401_pi300-10000_cl_pass0_tfrozen_src26.ximg exists
[Sun Mar 18 13:11:45 2012] fullrun_pn_xmm0511580401_pi300-10000_cl_pass0_tfrozen_src26_1.ximg exists
[Sun Mar 18 13:11:45 2012] Fit fullrun_pn_xmm0511580401_pi300-10000_cl_pass0_tfrozen_src26 appears to have run properly
[Sun Mar 18 15:01:57 2012] Spatial fit model total counts = 1636.600000, observed total counts = 1533.000000
[Sun Mar 18 15:01:57 2012] Offset between fit and detection position for source 27 = 0.181644 pixels
[Sun Mar 18 15:01:57 2012] 1629.319000 total counts/ 1376.620000 bgd. counts: snr = 6.810774
Spatial fit parameters:
  Offset between fit and detection position for source 27 = 0.181644 pixels
  Position = (400.1, 314.8) = 7 8 6.66 -49 31 49.5
  Extent = 4.5 (4.0-5.2)", rotation angle = 0
  Source counts = 252.7 +/- 40.4
  Background counts = 1376.6
  Rate = 0.003 +/- 0.0005
[Sun Mar 18 15:01:57 2012] Vigneting correction estimate = 1.000000
[Sun Mar 18 15:01:57 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Mar 18 15:01:57 2012] Assessing source extent using major axis lower bound
[Sun Mar 18 15:01:57 2012] Source does appear to be extended
[Sun Mar 18 15:01:57 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Mar 18 15:02:28 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Mar 18 15:02:28 2012] Initial guess for spatial extent in simple fitting = 4.54"
[Sun Mar 18 15:02:28 2012] source mask rpix=1.0, npix_max = 9, mask sum = 9, frac = 0.945
[Sun Mar 18 15:02:28 2012] Giving source the simple spatial ID 26 for pass 1, mean size = 4.54"
[Sun Mar 18 20:24:03 2012] fullrun_pn_xmm0511580401_pi300-10000_cl_pass1_src26.ximg exists
[Sun Mar 18 20:24:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0511580401_pi300-10000_cl_pass1_src26.csv
[Sun Mar 18 20:24:03 2012] fullrun_pn_xmm0511580401_pi300-10000_cl_pass1_src26_1.ximg exists
[Sun Mar 18 20:24:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0511580401_pi300-10000_cl_pass1_src26.csv
[Sun Mar 18 20:24:03 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0511580401_pi300-10000_cl_pass1_src26_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0511580401_pi300-10000_cl_pass1_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Mar 18 20:24:03 2012] fullrun_pn_xmm0511580401_pi300-10000_cl_pass1_tfrozen_src26.ximg exists
[Sun Mar 18 20:24:03 2012] fullrun_pn_xmm0511580401_pi300-10000_cl_pass1_tfrozen_src26_1.ximg exists
[Sun Mar 18 20:24:03 2012] Fit fullrun_pn_xmm0511580401_pi300-10000_cl_pass1_tfrozen_src26 appears to have run properly
[Sun Mar 18 21:47:51 2012] Spatial fit model total counts = 1637.810000, observed total counts = 1533.000000
[Sun Mar 18 21:47:51 2012] Offset between fit and detection position for source 27 = 0.007035 pixels
[Sun Mar 18 21:47:51 2012] 1630.520000 total counts/ 1375.900000 bgd. counts: snr = 6.864345
Spatial fit parameters:
  Offset between fit and detection position for source 27 = 0.007035 pixels
  Position = (400.1, 314.8) = 7 8 6.65 -49 31 49.5
  Extent = 4.6 (4.0-5.2)", rotation angle = 0
  Source counts = 254.6 +/- 40.4
  Background counts = 1375.9
  Rate = 0.003 +/- 0.0005
[Sun Mar 18 21:47:51 2012] Vigneting correction estimate = 1.000000
[Sun Mar 18 21:47:51 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Mar 18 21:47:51 2012] Assessing source extent using major axis lower bound
[Sun Mar 18 21:47:51 2012] Source does appear to be extended
[Sun Mar 18 21:47:51 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Mar 18 21:48:21 2012] XMMSAS src. selection expression = ellipse(34762.557140, 27343.372760, 274.516808, 274.516808, 0.000000, X, Y)
[Sun Mar 18 21:48:21 2012] Writing source region out to fullrun_pn_xmm0511580401_pi300-10000_pass1_cl_src27_src.reg
[Sun Mar 18 21:48:21 2012] Extracting stamp from image fullrun_pn_xmm0511580401_pi300-10000_cl_sm2.00.img.gz, (384, 299) - (416, 331)
[Sun Mar 18 21:48:21 2012] XMMSAS bgd. selection expression = annulus(34762.557140, 27343.372760, 457.528013, 915.056026, X, Y) && !ellipse(36536.699219, 27039.154968, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Mar 18 21:48:21 2012] Writing fullrun_pn_xmm0511580401_pi300-10000_pass1_cl_src27.gif
[Sun Mar 18 22:47:20 2012] Mean detx,y = (2406.22, -6784.33) 
[Sun Mar 18 22:47:30 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Mar 18 22:48:02 2012] Binned source spectrum to 10 counts/bin
[Sun Mar 18 22:48:02 2012] Setting source spectrum file to fullrun_pn_xmm0511580401_pi300-10000_pass1_cl_src27_src_b10.pi.gz
[Sun Mar 18 22:48:02 2012] Setting bgd. spectrum file to fullrun_pn_xmm0511580401_pi300-10000_pass1_cl_src27_bgd.pi.gz
[Mon Mar 19 02:39:16 2012] Updating aperture counts using extracted products
[Mon Mar 19 02:39:16 2012] Error reading totcts from fullrun_pn_xmm0511580401_pi300-10000_pass1_cl_src27_src_b10.pi.gz
[Mon Mar 19 02:39:18 2012] Calculating source flux in energy range 0.30-8.00
[Mon Mar 19 02:39:18 2012] Using photon index=1.80, rate=0.00325, arf fullrun_pn_xmm0511580401_pi300-10000_pass1_cl_src27.arf
[Mon Mar 19 02:39:18 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Mar 19 02:39:18 2012] Updating source flux to 1.5e-14