[Sun Mar 18 10:51:38 2012] Detection parameters:
  Position = (322.4, 297.1) = 7 8 41.37 -49 33 7.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 92732.2 +/- 358.7
  Background counts = 173.5
  Rate = 1 +/- 0.004

[Sun Mar 18 10:51:40 2012] Off-axis axis estimate = 1.74'
[Sun Mar 18 14:03:37 2012] Using EEF radius (= 7.30 ")to estimate initial spatial extent for simple fitting
[Sun Mar 18 14:03:37 2012] Initial guess for spatial extent in simple fitting = 7.30"
[Sun Mar 18 14:03:37 2012] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.054
[Sun Mar 18 14:03:37 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.30"
[Sun Mar 18 15:01:43 2012] fullrun_mos2_xmm0511580401_pi300-10000_cl_pass0_src1.ximg exists
[Sun Mar 18 15:01:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0511580401_pi300-10000_cl_pass0_src1.csv
[Sun Mar 18 15:01:43 2012] fullrun_mos2_xmm0511580401_pi300-10000_cl_pass0_src1_1.ximg exists
[Sun Mar 18 15:01:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0511580401_pi300-10000_cl_pass0_src1.csv
[Sun Mar 18 15:01:43 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0511580401_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0511580401_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Mar 18 15:01:43 2012] fullrun_mos2_xmm0511580401_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sun Mar 18 15:01:43 2012] fullrun_mos2_xmm0511580401_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sun Mar 18 15:01:43 2012] Fit fullrun_mos2_xmm0511580401_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sun Mar 18 15:02:10 2012] Spatial fit model total counts = 73430.200000, observed total counts = 71365.000000
[Sun Mar 18 15:02:10 2012] Offset between fit and detection position for source 3 = 0.131940 pixels
[Sun Mar 18 15:02:10 2012] 73469.900000 total counts/ 17862.000000 bgd. counts: snr = 416.074837
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.131940 pixels
  Position = (322.3, 297.1) = 7 8 41.42 -49 33 7.2
  Extent = 5.3 (5.2-5.3)", rotation angle = 0
  Source counts = 55607.9 +/- 271.1
  Background counts = 17862.0
  Rate = 0.6 +/- 0.003
[Sun Mar 18 15:02:10 2012] Vigneting correction estimate = 1.000000
[Sun Mar 18 15:02:10 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Mar 18 15:02:10 2012] Assessing source extent using major axis lower bound
[Sun Mar 18 15:02:10 2012] Source does appear to be extended
[Sun Mar 18 15:02:10 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Mar 18 21:06:13 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Mar 18 21:06:13 2012] Initial guess for spatial extent in simple fitting = 5.27"
[Sun Mar 18 21:06:13 2012] source mask rpix=1.2, npix_max = 11, mask sum = 12, frac = 1.023
[Sun Mar 18 21:06:13 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.27"
[Sun Mar 18 21:47:37 2012] fullrun_mos2_xmm0511580401_pi300-10000_cl_pass1_src1.ximg exists
[Sun Mar 18 21:47:37 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0511580401_pi300-10000_cl_pass1_src1.csv
[Sun Mar 18 21:47:37 2012] fullrun_mos2_xmm0511580401_pi300-10000_cl_pass1_src1_1.ximg exists
[Sun Mar 18 21:47:37 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0511580401_pi300-10000_cl_pass1_src1.csv
[Sun Mar 18 21:47:37 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0511580401_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0511580401_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Mar 18 21:47:37 2012] fullrun_mos2_xmm0511580401_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sun Mar 18 21:47:37 2012] fullrun_mos2_xmm0511580401_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sun Mar 18 21:47:37 2012] Fit fullrun_mos2_xmm0511580401_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sun Mar 18 21:48:03 2012] Spatial fit model total counts = 73448.900000, observed total counts = 71365.000000
[Sun Mar 18 21:48:03 2012] Offset between fit and detection position for source 3 = 0.000113 pixels
[Sun Mar 18 21:48:03 2012] 73486.200000 total counts/ 17876.800000 bgd. counts: snr = 415.913789
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.000113 pixels
  Position = (322.3, 297.1) = 7 8 41.42 -49 33 7.2
  Extent = 5.3 (5.3-5.3)", rotation angle = 0
  Source counts = 55609.4 +/- 271.1
  Background counts = 17876.8
  Rate = 0.6 +/- 0.003
[Sun Mar 18 21:48:03 2012] Vigneting correction estimate = 1.000000
[Sun Mar 18 21:48:03 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Mar 18 21:48:03 2012] Assessing source extent using major axis lower bound
[Sun Mar 18 21:48:03 2012] Source does appear to be extended
[Sun Mar 18 21:48:03 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Mar 19 01:50:37 2012] Counts = 55609.400000, rescaling region sizes by 3.000000
[Mon Mar 19 01:50:37 2012] XMMSAS src. selection expression = ellipse(27991.453400, 25799.294800, 949.455027, 949.455027, 0.000000, X, Y)
[Mon Mar 19 01:50:37 2012] Writing source region out to fullrun_mos2_xmm0511580401_pi300-10000_pass1_cl_src3_src.reg
[Mon Mar 19 01:50:37 2012] Extracting stamp from image fullrun_mos2_xmm0511580401_pi300-10000_cl_sm2.00.img.gz, (268, 243) - (377, 352)
[Mon Mar 19 01:50:37 2012] XMMSAS bgd. selection expression = annulus(27991.453400, 25799.294800, 4747.275137, 9494.550273, X, Y) && !ellipse(19420.863022, 19703.192200, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19727.949000, 30093.922200, 558.808016, 558.808016, 0.000000, X, Y) && !ellipse(30323.665161, 35012.157501, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28336.758057, 24992.565460, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27697.034058, 17662.261887, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37164.701263, 35098.273376, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Mar 19 01:50:37 2012] Writing fullrun_mos2_xmm0511580401_pi300-10000_pass1_cl_src3.gif
[Mon Mar 19 01:50:58 2012] Mean detx,y = (18.37, 78.25) 
[Mon Mar 19 01:51:01 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Mar 19 01:54:52 2012] Binned source spectrum to 10 counts/bin
[Mon Mar 19 01:54:52 2012] Setting source spectrum file to fullrun_mos2_xmm0511580401_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Mon Mar 19 01:54:52 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0511580401_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Mon Mar 19 02:39:21 2012] Updating aperture counts using extracted products
[Mon Mar 19 02:39:21 2012] Error reading totcts from fullrun_mos2_xmm0511580401_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Mon Mar 19 02:39:22 2012] Calculating source flux in energy range 0.30-8.00
[Mon Mar 19 02:39:22 2012] Using photon index=1.80, rate=0.631, arf fullrun_mos2_xmm0511580401_pi300-10000_pass1_cl_src3.arf
[Mon Mar 19 02:39:22 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Mar 19 02:39:22 2012] Updating source flux to 6.6e-12
[Mon Mar 19 02:41:04 2012] Reading fit data from xmm0511580401/analysis//spectral/fullrun_mos2_xmm0511580401_pi300-10000_pass1_cl_src3_pl.csv
[Mon Mar 19 02:41:04 2012] Spectral fit parameter nH value = 1.33403e+21
[Mon Mar 19 02:41:04 2012] Spectral fit parameter PhoIndex value = 4.15802
[Mon Mar 19 02:41:04 2012] Failed to get F(0.3-8.0) from xmm0511580401/analysis//spectral/fullrun_mos2_xmm0511580401_pi300-10000_pass1_cl_src3_pl.csv, possibly due to different flux energy range selected
[Mon Mar 19 02:41:04 2012] Calculating source flux in energy range 0.30-8.00
[Mon Mar 19 02:41:04 2012] Using Nh = 1.3e+21, photon index=4.16, rate=0.631, arf fullrun_mos2_xmm0511580401_pi300-10000_pass1_cl_src3.arf
[Mon Mar 19 02:41:04 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Mar 19 02:41:04 2012] Updating source flux to 4.4e-12