[Sun Mar 18 10:51:40 2012] Detection parameters:
  Position = (318.9, 203.6) = 7 8 42.91 -49 39 50.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 169.8 +/- 17.9
  Background counts = 136.4
  Rate = 0.002 +/- 0.0002

[Sun Mar 18 10:51:40 2012] Off-axis axis estimate = 7.04'
[Sun Mar 18 14:03:37 2012] Using EEF radius (= 9.95 ")to estimate initial spatial extent for simple fitting
[Sun Mar 18 14:03:37 2012] Initial guess for spatial extent in simple fitting = 9.95"
[Sun Mar 18 14:03:37 2012] source mask rpix=2.3, npix_max = 31, mask sum = 22, frac = 0.708
[Sun Mar 18 14:03:37 2012] Giving source the simple spatial ID 18 for pass 0, mean size = 9.95"
[Sun Mar 18 15:01:43 2012] fullrun_mos2_xmm0511580401_pi300-10000_cl_pass0_src18.ximg exists
[Sun Mar 18 15:01:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0511580401_pi300-10000_cl_pass0_src18.csv
[Sun Mar 18 15:01:43 2012] fullrun_mos2_xmm0511580401_pi300-10000_cl_pass0_src18_1.ximg exists
[Sun Mar 18 15:01:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0511580401_pi300-10000_cl_pass0_src18.csv
[Sun Mar 18 15:01:43 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0511580401_pi300-10000_cl_pass0_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0511580401_pi300-10000_cl_pass0_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Mar 18 15:01:43 2012] fullrun_mos2_xmm0511580401_pi300-10000_cl_pass0_tfrozen_src18.ximg exists
[Sun Mar 18 15:01:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0511580401_pi300-10000_cl_pass0_tfrozen_src18.csv
[Sun Mar 18 15:01:43 2012] fullrun_mos2_xmm0511580401_pi300-10000_cl_pass0_tfrozen_src18_1.ximg exists
[Sun Mar 18 15:01:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0511580401_pi300-10000_cl_pass0_tfrozen_src18.csv
[Sun Mar 18 15:01:43 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0511580401_pi300-10000_cl_pass0_tfrozen_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0511580401_pi300-10000_cl_pass0_tfrozen_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Mar 18 15:02:10 2012] Source 20 is offset by 1.671419 and -2.580388 pixels which is larger than
2 X fitted extent = 1.143292 x 1.143292, not incorporating fit results
[Sun Mar 18 15:02:10 2012] Vigneting correction estimate = 1.000000
[Sun Mar 18 15:02:10 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Mar 18 15:02:10 2012] Assessing source extent using major
[Sun Mar 18 15:02:10 2012] Source does appear to be extended
[Sun Mar 18 15:02:10 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Mar 18 21:06:13 2012] Using EEF radius (= 9.95 ")to estimate initial spatial extent for simple fitting
[Sun Mar 18 21:06:13 2012] Initial guess for spatial extent in simple fitting = 9.95"
[Sun Mar 18 21:06:13 2012] source mask rpix=2.3, npix_max = 31, mask sum = 22, frac = 0.708
[Sun Mar 18 21:06:13 2012] Giving source the simple spatial ID 15 for pass 1, mean size = 9.95"
[Sun Mar 18 21:47:37 2012] fullrun_mos2_xmm0511580401_pi300-10000_cl_pass1_src15.ximg exists
[Sun Mar 18 21:47:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0511580401_pi300-10000_cl_pass1_src15.csv
[Sun Mar 18 21:47:37 2012] fullrun_mos2_xmm0511580401_pi300-10000_cl_pass1_src15_1.ximg exists
[Sun Mar 18 21:47:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0511580401_pi300-10000_cl_pass1_src15.csv
[Sun Mar 18 21:47:37 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0511580401_pi300-10000_cl_pass1_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0511580401_pi300-10000_cl_pass1_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Mar 18 21:47:37 2012] fullrun_mos2_xmm0511580401_pi300-10000_cl_pass1_tfrozen_src15.ximg exists
[Sun Mar 18 21:47:37 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0511580401_pi300-10000_cl_pass1_tfrozen_src15.csv
[Sun Mar 18 21:47:37 2012] fullrun_mos2_xmm0511580401_pi300-10000_cl_pass1_tfrozen_src15_1.ximg exists
[Sun Mar 18 21:47:37 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0511580401_pi300-10000_cl_pass1_tfrozen_src15.csv
[Sun Mar 18 21:47:37 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0511580401_pi300-10000_cl_pass1_tfrozen_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0511580401_pi300-10000_cl_pass1_tfrozen_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Mar 18 21:48:03 2012] Spatial fit model total counts = -895.631000, observed total counts = 408.000000
[Sun Mar 18 21:48:03 2012] Poor agreement between spatial fit and data for source 20
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun Mar 18 21:48:03 2012] Vigneting correction estimate = 1.000000
[Sun Mar 18 21:48:03 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Mar 18 21:48:03 2012] Assessing source extent using major
[Sun Mar 18 21:48:03 2012] Source does appear to be extended
[Sun Mar 18 21:48:03 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Mar 19 01:50:37 2012] XMMSAS src. selection expression = ellipse(27697.034058, 17662.261887, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Mar 19 01:50:37 2012] Writing source region out to fullrun_mos2_xmm0511580401_pi300-10000_pass1_cl_src20_src.reg
[Mon Mar 19 01:50:37 2012] Extracting stamp from image fullrun_mos2_xmm0511580401_pi300-10000_cl_sm2.00.img.gz, (281, 166) - (356, 241)
[Mon Mar 19 01:50:37 2012] XMMSAS bgd. selection expression = annulus(27697.034058, 17662.261887, 1087.500000, 2175.000000, X, Y)
[Mon Mar 19 01:50:37 2012] Writing fullrun_mos2_xmm0511580401_pi300-10000_pass1_cl_src20.gif
[Mon Mar 19 02:02:42 2012] Mean detx,y = (-6939.98, -4392.43) 
[Mon Mar 19 02:02:43 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Mar 19 02:03:00 2012] Binned source spectrum to 10 counts/bin
[Mon Mar 19 02:03:00 2012] Setting source spectrum file to fullrun_mos2_xmm0511580401_pi300-10000_pass1_cl_src20_src_b10.pi.gz
[Mon Mar 19 02:03:00 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0511580401_pi300-10000_pass1_cl_src20_bgd.pi.gz
[Mon Mar 19 02:35:33 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Mar 19 02:35:33 2012] rmf not generated due to insufficient counts
[Mon Mar 19 02:39:22 2012] Updating aperture counts using extracted products
[Mon Mar 19 02:39:22 2012] Error reading totcts from fullrun_mos2_xmm0511580401_pi300-10000_pass1_cl_src20_src_b10.pi.gz
[Mon Mar 19 02:39:23 2012] Calculating source flux in energy range 0.30-8.00
[Mon Mar 19 02:39:23 2012] Using photon index=1.80, rate=0.00165, arf fullrun_mos2_xmm0511580401_pi300-10000_pass1_cl_src20.arf
[Mon Mar 19 02:39:23 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Mar 19 02:39:23 2012] Updating source flux to 3.8e-14
[Mon Mar 19 02:40:18 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting