[Sun Mar 18 10:51:39 2012] Detection parameters:
  Position = (326.3, 287.8) = 7 8 39.64 -49 33 54.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 155.7 +/- 23.8
  Background counts = 172.6
  Rate = 0.002 +/- 0.0003

[Sun Mar 18 10:51:40 2012] Off-axis axis estimate = 2.16'
[Sun Mar 18 14:03:37 2012] Using EEF radius (= 7.51 ")to estimate initial spatial extent for simple fitting
[Sun Mar 18 14:03:37 2012] Initial guess for spatial extent in simple fitting = 7.51"
[Sun Mar 18 14:03:37 2012] source mask rpix=1.7, npix_max = 19, mask sum = 14, frac = 0.706
[Sun Mar 18 14:03:37 2012] Giving source the simple spatial ID 15 for pass 0, mean size = 7.51"
[Sun Mar 18 15:01:43 2012] fullrun_mos2_xmm0511580401_pi300-10000_cl_pass0_src15.ximg exists
[Sun Mar 18 15:01:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0511580401_pi300-10000_cl_pass0_src15.csv
[Sun Mar 18 15:01:43 2012] fullrun_mos2_xmm0511580401_pi300-10000_cl_pass0_src15_1.ximg exists
[Sun Mar 18 15:01:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0511580401_pi300-10000_cl_pass0_src15.csv
[Sun Mar 18 15:01:43 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0511580401_pi300-10000_cl_pass0_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0511580401_pi300-10000_cl_pass0_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Mar 18 15:01:43 2012] fullrun_mos2_xmm0511580401_pi300-10000_cl_pass0_tfrozen_src15.ximg exists
[Sun Mar 18 15:01:43 2012] fullrun_mos2_xmm0511580401_pi300-10000_cl_pass0_tfrozen_src15_1.ximg exists
[Sun Mar 18 15:01:43 2012] Fit fullrun_mos2_xmm0511580401_pi300-10000_cl_pass0_tfrozen_src15 appears to have run properly
[Sun Mar 18 15:02:10 2012] Source 13 is offset by 4.102667 and -8.075776 pixels which is larger than
2 X fitted extent = 1.919995 x 1.919995, not incorporating fit results
[Sun Mar 18 15:02:10 2012] Vigneting correction estimate = 1.000000
[Sun Mar 18 15:02:10 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Mar 18 15:02:10 2012] Assessing source extent using major
[Sun Mar 18 15:02:10 2012] Source does appear to be extended
[Sun Mar 18 15:02:10 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Mar 18 21:06:13 2012] Using EEF radius (= 7.51 ")to estimate initial spatial extent for simple fitting
[Sun Mar 18 21:06:13 2012] Initial guess for spatial extent in simple fitting = 7.51"
[Sun Mar 18 21:06:13 2012] source mask rpix=1.7, npix_max = 19, mask sum = 14, frac = 0.706
[Sun Mar 18 21:06:13 2012] Giving source the simple spatial ID 12 for pass 1, mean size = 7.51"
[Sun Mar 18 21:47:37 2012] fullrun_mos2_xmm0511580401_pi300-10000_cl_pass1_src12.ximg exists
[Sun Mar 18 21:47:37 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0511580401_pi300-10000_cl_pass1_src12.csv
[Sun Mar 18 21:47:37 2012] fullrun_mos2_xmm0511580401_pi300-10000_cl_pass1_src12_1.ximg exists
[Sun Mar 18 21:47:37 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0511580401_pi300-10000_cl_pass1_src12.csv
[Sun Mar 18 21:47:37 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0511580401_pi300-10000_cl_pass1_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0511580401_pi300-10000_cl_pass1_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Mar 18 21:47:37 2012] fullrun_mos2_xmm0511580401_pi300-10000_cl_pass1_tfrozen_src12.ximg exists
[Sun Mar 18 21:47:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0511580401_pi300-10000_cl_pass1_tfrozen_src12.csv
[Sun Mar 18 21:47:37 2012] fullrun_mos2_xmm0511580401_pi300-10000_cl_pass1_tfrozen_src12_1.ximg exists
[Sun Mar 18 21:47:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0511580401_pi300-10000_cl_pass1_tfrozen_src12.csv
[Sun Mar 18 21:47:37 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0511580401_pi300-10000_cl_pass1_tfrozen_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0511580401_pi300-10000_cl_pass1_tfrozen_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Mar 18 21:48:03 2012] Warning: source 12 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 13 at 12.835503 pixels away
[Sun Mar 18 21:48:03 2012] Vigneting correction estimate = 1.000000
[Sun Mar 18 21:48:03 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Mar 18 21:48:03 2012] Assessing source extent using major
[Sun Mar 18 21:48:03 2012] Source does appear to be extended
[Sun Mar 18 21:48:03 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Mar 19 01:50:37 2012] XMMSAS src. selection expression = ellipse(28336.758057, 24992.565460, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Mar 19 01:50:37 2012] Writing source region out to fullrun_mos2_xmm0511580401_pi300-10000_pass1_cl_src13_src.reg
[Mon Mar 19 01:50:37 2012] Extracting stamp from image fullrun_mos2_xmm0511580401_pi300-10000_cl_sm2.00.img.gz, (289, 250) - (364, 325)
[Mon Mar 19 01:50:37 2012] XMMSAS bgd. selection expression = annulus(28336.758057, 24992.565460, 1087.500000, 2175.000000, X, Y) && !ellipse(27991.453400, 25799.294800, 1265.940036, 1265.940036, 0.000000, X, Y)
[Mon Mar 19 01:50:37 2012] Writing fullrun_mos2_xmm0511580401_pi300-10000_pass1_cl_src13.gif
[Mon Mar 19 02:01:06 2012] Mean detx,y = (-462.79, -41.71) 
[Mon Mar 19 02:01:10 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Mar 19 02:01:43 2012] Binned source spectrum to 10 counts/bin
[Mon Mar 19 02:01:43 2012] Setting source spectrum file to fullrun_mos2_xmm0511580401_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Mon Mar 19 02:01:43 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0511580401_pi300-10000_pass1_cl_src13_bgd.pi.gz
[Mon Mar 19 02:27:25 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Mar 19 02:27:25 2012] rmf not generated due to insufficient counts
[Mon Mar 19 02:39:22 2012] Updating aperture counts using extracted products
[Mon Mar 19 02:39:22 2012] Error reading totcts from fullrun_mos2_xmm0511580401_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Mon Mar 19 02:39:23 2012] Calculating source flux in energy range 0.30-8.00
[Mon Mar 19 02:39:23 2012] Using photon index=1.80, rate=0.00216, arf fullrun_mos2_xmm0511580401_pi300-10000_pass1_cl_src13.arf
[Mon Mar 19 02:39:23 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Mar 19 02:39:23 2012] Updating source flux to 2.5e-14
[Mon Mar 19 02:40:18 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting