[Sun Mar 18 10:51:34 2012] Detection parameters:
  Position = (322.2, 297.0) = 7 8 41.46 -49 33 8.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 88930.3 +/- 360.2
  Background counts = 262.1
  Rate = 0.9 +/- 0.004

[Sun Mar 18 10:51:36 2012] Off-axis axis estimate = 1.73'
[Sun Mar 18 13:11:45 2012] Using EEF radius (= 7.29 ")to estimate initial spatial extent for simple fitting
[Sun Mar 18 13:11:45 2012] Initial guess for spatial extent in simple fitting = 7.29"
[Sun Mar 18 13:11:45 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.844
[Sun Mar 18 13:11:45 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.29"
[Sun Mar 18 14:03:37 2012] fullrun_mos1_xmm0511580401_pi300-10000_cl_pass0_src1.ximg exists
[Sun Mar 18 14:03:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0511580401_pi300-10000_cl_pass0_src1.csv
[Sun Mar 18 14:03:37 2012] fullrun_mos1_xmm0511580401_pi300-10000_cl_pass0_src1_1.ximg exists
[Sun Mar 18 14:03:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0511580401_pi300-10000_cl_pass0_src1.csv
[Sun Mar 18 14:03:37 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0511580401_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0511580401_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Mar 18 14:03:37 2012] fullrun_mos1_xmm0511580401_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sun Mar 18 14:03:37 2012] fullrun_mos1_xmm0511580401_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sun Mar 18 14:03:37 2012] Fit fullrun_mos1_xmm0511580401_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sun Mar 18 15:02:03 2012] Spatial fit model total counts = 67343.000000, observed total counts = 66929.000000
[Sun Mar 18 15:02:03 2012] Offset between fit and detection position for source 2 = 0.117127 pixels
[Sun Mar 18 15:02:03 2012] 67483.700000 total counts/ 16335.200000 bgd. counts: snr = 400.194093
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.117127 pixels
  Position = (322.1, 296.9) = 7 8 41.51 -49 33 7.9
  Extent = 5.2 (5.2-5.2)", rotation angle = 0
  Source counts = 51148.5 +/- 259.8
  Background counts = 16335.2
  Rate = 0.6 +/- 0.003
[Sun Mar 18 15:02:03 2012] Vigneting correction estimate = 1.000000
[Sun Mar 18 15:02:03 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Mar 18 15:02:03 2012] Assessing source extent using major axis lower bound
[Sun Mar 18 15:02:03 2012] Source does appear to be extended
[Sun Mar 18 15:02:03 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Mar 18 20:24:04 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Mar 18 20:24:04 2012] Initial guess for spatial extent in simple fitting = 5.20"
[Sun Mar 18 20:24:04 2012] source mask rpix=1.2, npix_max = 11, mask sum = 16, frac = 1.390
[Sun Mar 18 20:24:04 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.20"
[Sun Mar 18 21:06:13 2012] fullrun_mos1_xmm0511580401_pi300-10000_cl_pass1_src1.ximg exists
[Sun Mar 18 21:06:13 2012] fullrun_mos1_xmm0511580401_pi300-10000_cl_pass1_src1_1.ximg exists
[Sun Mar 18 21:06:13 2012] Fit fullrun_mos1_xmm0511580401_pi300-10000_cl_pass1_src1 appears to have run properly
[Sun Mar 18 21:06:13 2012] fullrun_mos1_xmm0511580401_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sun Mar 18 21:06:13 2012] fullrun_mos1_xmm0511580401_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sun Mar 18 21:06:13 2012] Fit fullrun_mos1_xmm0511580401_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sun Mar 18 21:47:57 2012] Spatial fit model total counts = 67342.200000, observed total counts = 66929.000000
[Sun Mar 18 21:47:57 2012] Offset between fit and detection position for source 2 = 0.000001 pixels
[Sun Mar 18 21:47:57 2012] 67482.900000 total counts/ 16335.300000 bgd. counts: snr = 400.185826
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.000001 pixels
  Position = (322.1, 296.9) = 7 8 41.51 -49 33 7.9
  Extent = 5.2 (5.2-5.2)", rotation angle = 0
  Source counts = 51147.6 +/- 259.8
  Background counts = 16335.3
  Rate = 0.6 +/- 0.003
[Sun Mar 18 21:47:57 2012] Vigneting correction estimate = 1.000000
[Sun Mar 18 21:47:57 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Mar 18 21:47:57 2012] Assessing source extent using major axis lower bound
[Sun Mar 18 21:47:57 2012] Source does appear to be extended
[Sun Mar 18 21:47:57 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Mar 19 01:04:59 2012] Counts = 51147.600000, rescaling region sizes by 3.000000
[Mon Mar 19 01:04:59 2012] XMMSAS src. selection expression = ellipse(27974.829800, 25785.666800, 936.720027, 936.720027, 0.000000, X, Y)
[Mon Mar 19 01:04:59 2012] Writing source region out to fullrun_mos1_xmm0511580401_pi300-10000_pass1_cl_src2_src.reg
[Mon Mar 19 01:04:59 2012] Extracting stamp from image fullrun_mos1_xmm0511580401_pi300-10000_cl_sm2.00.img.gz, (268, 243) - (376, 351)
[Mon Mar 19 01:04:59 2012] XMMSAS bgd. selection expression = annulus(27974.829800, 25785.666800, 4683.600135, 9367.200270, X, Y) && !ellipse(19705.721500, 30022.009600, 538.800016, 538.800016, 0.000000, X, Y) && !ellipse(34717.597931, 27366.947540, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30220.461517, 34841.829407, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36719.854000, 35571.860000, 623.215218, 623.215218, 0.000000, X, Y) && !ellipse(37141.172394, 35120.827850, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Mar 19 01:04:59 2012] Writing fullrun_mos1_xmm0511580401_pi300-10000_pass1_cl_src2.gif
[Mon Mar 19 01:05:24 2012] Mean detx,y = (276.89, -172.05) 
[Mon Mar 19 01:05:27 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Mar 19 01:09:00 2012] Binned source spectrum to 10 counts/bin
[Mon Mar 19 01:09:00 2012] Setting source spectrum file to fullrun_mos1_xmm0511580401_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Mon Mar 19 01:09:00 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0511580401_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Mon Mar 19 02:39:19 2012] Updating aperture counts using extracted products
[Mon Mar 19 02:39:19 2012] Error reading totcts from fullrun_mos1_xmm0511580401_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Mon Mar 19 02:39:20 2012] Calculating source flux in energy range 0.30-8.00
[Mon Mar 19 02:39:20 2012] Using photon index=1.80, rate=0.587, arf fullrun_mos1_xmm0511580401_pi300-10000_pass1_cl_src2.arf
[Mon Mar 19 02:39:20 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Mar 19 02:39:20 2012] Updating source flux to 5.5e-12
[Mon Mar 19 02:40:18 2012] Reading fit data from xmm0511580401/analysis//spectral/fullrun_mos1_xmm0511580401_pi300-10000_pass1_cl_src2_pl.csv
[Mon Mar 19 02:40:18 2012] Spectral fit parameter nH value = 1.18647e+21
[Mon Mar 19 02:40:18 2012] Spectral fit parameter PhoIndex value = 4.12666
[Mon Mar 19 02:40:18 2012] Failed to get F(0.3-8.0) from xmm0511580401/analysis//spectral/fullrun_mos1_xmm0511580401_pi300-10000_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Mon Mar 19 02:40:18 2012] Calculating source flux in energy range 0.30-8.00
[Mon Mar 19 02:40:18 2012] Using Nh = 1.2e+21, photon index=4.13, rate=0.587, arf fullrun_mos1_xmm0511580401_pi300-10000_pass1_cl_src2.arf
[Mon Mar 19 02:40:18 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Mar 19 02:40:18 2012] Updating source flux to 3.7e-12