[Sun Mar 18 10:51:35 2012] Detection parameters:
  Position = (427.5, 404.2) = 7 7 54.56 -49 25 20.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 139.1 +/- 22.0
  Background counts = 125.1
  Rate = 0.001 +/- 0.0002

[Sun Mar 18 10:51:36 2012] Off-axis axis estimate = 12.10'
[Sun Mar 18 13:11:45 2012] Using EEF radius (= 12.48 ")to estimate initial spatial extent for simple fitting
[Sun Mar 18 13:11:45 2012] Initial guess for spatial extent in simple fitting = 12.48"
[Sun Mar 18 13:11:45 2012] source mask rpix=2.9, npix_max = 45, mask sum = 47, frac = 1.036
[Sun Mar 18 13:11:45 2012] Giving source the simple spatial ID 18 for pass 0, mean size = 12.48"
[Sun Mar 18 14:03:37 2012] fullrun_mos1_xmm0511580401_pi300-10000_cl_pass0_src18.ximg exists
[Sun Mar 18 14:03:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0511580401_pi300-10000_cl_pass0_src18.csv
[Sun Mar 18 14:03:37 2012] fullrun_mos1_xmm0511580401_pi300-10000_cl_pass0_src18_1.ximg exists
[Sun Mar 18 14:03:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0511580401_pi300-10000_cl_pass0_src18.csv
[Sun Mar 18 14:03:37 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0511580401_pi300-10000_cl_pass0_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0511580401_pi300-10000_cl_pass0_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Mar 18 14:03:37 2012] fullrun_mos1_xmm0511580401_pi300-10000_cl_pass0_tfrozen_src18.ximg exists
[Sun Mar 18 14:03:37 2012] fullrun_mos1_xmm0511580401_pi300-10000_cl_pass0_tfrozen_src18_1.ximg exists
[Sun Mar 18 14:03:37 2012] Fit fullrun_mos1_xmm0511580401_pi300-10000_cl_pass0_tfrozen_src18 appears to have run properly
[Sun Mar 18 15:02:03 2012] Source 10 is offset by -7.007513 and 5.720159 pixels which is larger than
2 X fitted extent = 1.434377 x 1.434377, not incorporating fit results
[Sun Mar 18 15:02:03 2012] Warning, spatial fit 18 centroid is now closest to src. 9
[Sun Mar 18 15:02:03 2012] Vigneting correction estimate = 1.000000
[Sun Mar 18 15:02:03 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Mar 18 15:02:03 2012] Assessing source extent using major
[Sun Mar 18 15:02:03 2012] Source does appear to be extended
[Sun Mar 18 15:02:03 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Mar 18 15:02:03 2012] Source is confused with source 9
[Sun Mar 18 20:24:04 2012] Using EEF radius (= 12.48 ")to estimate initial spatial extent for simple fitting
[Sun Mar 18 20:24:04 2012] Initial guess for spatial extent in simple fitting = 12.48"
[Sun Mar 18 20:24:04 2012] source mask rpix=2.9, npix_max = 45, mask sum = 47, frac = 1.036
[Sun Mar 18 20:24:04 2012] Giving source the simple spatial ID 17 for pass 1, mean size = 12.48"
[Sun Mar 18 21:06:13 2012] fullrun_mos1_xmm0511580401_pi300-10000_cl_pass1_src17.ximg exists
[Sun Mar 18 21:06:13 2012] fullrun_mos1_xmm0511580401_pi300-10000_cl_pass1_src17_1.ximg exists
[Sun Mar 18 21:06:13 2012] Fit fullrun_mos1_xmm0511580401_pi300-10000_cl_pass1_src17 appears to have run properly
[Sun Mar 18 21:06:13 2012] fullrun_mos1_xmm0511580401_pi300-10000_cl_pass1_tfrozen_src17.ximg exists
[Sun Mar 18 21:06:13 2012] fullrun_mos1_xmm0511580401_pi300-10000_cl_pass1_tfrozen_src17_1.ximg exists
[Sun Mar 18 21:06:13 2012] Fit fullrun_mos1_xmm0511580401_pi300-10000_cl_pass1_tfrozen_src17 appears to have run properly
[Sun Mar 18 21:47:57 2012] Warning, spatial fit 17 centroid is now closest to src. 9
[Sun Mar 18 21:47:57 2012] Vigneting correction estimate = 1.000000
[Sun Mar 18 21:47:57 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Mar 18 21:47:57 2012] Assessing source extent using major
[Sun Mar 18 21:47:57 2012] Source does appear to be extended
[Sun Mar 18 21:47:57 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Mar 19 01:05:00 2012] XMMSAS src. selection expression = ellipse(37141.172394, 35120.827850, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Mar 19 01:05:00 2012] Writing source region out to fullrun_mos1_xmm0511580401_pi300-10000_pass1_cl_src10_src.reg
[Mon Mar 19 01:05:00 2012] Extracting stamp from image fullrun_mos1_xmm0511580401_pi300-10000_cl_sm2.00.img.gz, (390, 367) - (465, 442)
[Mon Mar 19 01:05:00 2012] XMMSAS bgd. selection expression = annulus(37141.172394, 35120.827850, 1087.500000, 2175.000000, X, Y) && !ellipse(36719.854000, 35571.860000, 623.215218, 623.215218, 0.000000, X, Y) && !ellipse(34876.687286, 36982.539703, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Mar 19 01:05:00 2012] Writing fullrun_mos1_xmm0511580401_pi300-10000_pass1_cl_src10.gif
[Mon Mar 19 01:16:50 2012] Mean detx,y = (12929.16, -3357.59) 
[Mon Mar 19 01:16:51 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Mar 19 01:16:59 2012] Binned source spectrum to 10 counts/bin
[Mon Mar 19 01:16:59 2012] Setting source spectrum file to fullrun_mos1_xmm0511580401_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Mon Mar 19 01:16:59 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0511580401_pi300-10000_pass1_cl_src10_bgd.pi.gz
[Mon Mar 19 01:50:19 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Mar 19 01:50:19 2012] rmf not generated due to insufficient counts
[Mon Mar 19 02:39:20 2012] Updating aperture counts using extracted products
[Mon Mar 19 02:39:20 2012] Error reading totcts from fullrun_mos1_xmm0511580401_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Mon Mar 19 02:39:21 2012] Calculating source flux in energy range 0.30-8.00
[Mon Mar 19 02:39:21 2012] Using photon index=1.80, rate=0.00135, arf fullrun_mos1_xmm0511580401_pi300-10000_pass1_cl_src10.arf
[Mon Mar 19 02:39:21 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Mar 19 02:39:21 2012] Updating source flux to 3.5e-14
[Mon Mar 19 02:39:24 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting