[Wed Jun 12 05:19:32 2013] Detection parameters:
  Position = (369.5, 419.0) = 7 8 20.09 -49 24 10.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 146.8 +/- 21.5
  Background counts = 235.5
  Rate = 0.001 +/- 0.0002

[Wed Jun 12 05:19:33 2013] Off-axis axis estimate = 10.15'
[Wed Jun 12 05:26:24 2013] Using EEF radius (= 11.50 ")to estimate initial spatial extent for simple fitting
[Wed Jun 12 05:26:24 2013] Initial guess for spatial extent in simple fitting = 11.50"
[Wed Jun 12 05:26:24 2013] source mask rpix=2.6, npix_max = 39, mask sum = 38, frac = 0.961
[Wed Jun 12 05:26:24 2013] Giving source the simple spatial ID 18 for pass 0, mean size = 11.50"
[Wed Jun 12 06:38:07 2013] fullrun_pn_xmm0511580301_pi300-10000_cl_pass0_src18.ximg exists
[Wed Jun 12 06:38:07 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0511580301_pi300-10000_cl_pass0_src18.csv
[Wed Jun 12 06:38:07 2013] fullrun_pn_xmm0511580301_pi300-10000_cl_pass0_src18_1.ximg exists
[Wed Jun 12 06:38:07 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0511580301_pi300-10000_cl_pass0_src18.csv
[Wed Jun 12 06:38:07 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0511580301_pi300-10000_cl_pass0_src18_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0511580301_pi300-10000_cl_pass0_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 12 06:38:07 2013] fullrun_pn_xmm0511580301_pi300-10000_cl_pass0_tfrozen_src18.ximg exists
[Wed Jun 12 06:38:07 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0511580301_pi300-10000_cl_pass0_tfrozen_src18.csv
[Wed Jun 12 06:38:07 2013] fullrun_pn_xmm0511580301_pi300-10000_cl_pass0_tfrozen_src18_1.ximg exists
[Wed Jun 12 06:38:07 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0511580301_pi300-10000_cl_pass0_tfrozen_src18.csv
[Wed Jun 12 06:38:07 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0511580301_pi300-10000_cl_pass0_tfrozen_src18_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0511580301_pi300-10000_cl_pass0_tfrozen_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 12 08:01:39 2013] Source 18 is offset by -0.060663 and 9.407536 pixels which is larger than
2 X fitted extent = 6.513379 x 6.513379, not incorporating fit results
[Wed Jun 12 08:01:39 2013] Vigneting correction estimate = 1.000000
[Wed Jun 12 08:01:39 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 12 08:01:39 2013] Assessing source extent using major
[Wed Jun 12 08:01:39 2013] Source does appear to be extended
[Wed Jun 12 08:01:39 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 12 08:01:57 2013] Using EEF radius (= 11.50 ")to estimate initial spatial extent for simple fitting
[Wed Jun 12 08:01:57 2013] Initial guess for spatial extent in simple fitting = 11.50"
[Wed Jun 12 08:01:57 2013] source mask rpix=2.6, npix_max = 39, mask sum = 38, frac = 0.961
[Wed Jun 12 08:01:57 2013] Giving source the simple spatial ID 18 for pass 1, mean size = 11.50"
[Wed Jun 12 09:05:32 2013] fullrun_pn_xmm0511580301_pi300-10000_cl_pass1_src18.ximg exists
[Wed Jun 12 09:05:32 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0511580301_pi300-10000_cl_pass1_src18.csv
[Wed Jun 12 09:05:32 2013] fullrun_pn_xmm0511580301_pi300-10000_cl_pass1_src18_1.ximg exists
[Wed Jun 12 09:05:32 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0511580301_pi300-10000_cl_pass1_src18.csv
[Wed Jun 12 09:05:32 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0511580301_pi300-10000_cl_pass1_src18_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0511580301_pi300-10000_cl_pass1_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 12 09:05:33 2013] fullrun_pn_xmm0511580301_pi300-10000_cl_pass1_tfrozen_src18.ximg exists
[Wed Jun 12 09:05:33 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0511580301_pi300-10000_cl_pass1_tfrozen_src18.csv
[Wed Jun 12 09:05:33 2013] fullrun_pn_xmm0511580301_pi300-10000_cl_pass1_tfrozen_src18_1.ximg exists
[Wed Jun 12 09:05:33 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0511580301_pi300-10000_cl_pass1_tfrozen_src18.csv
[Wed Jun 12 09:05:33 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0511580301_pi300-10000_cl_pass1_tfrozen_src18_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0511580301_pi300-10000_cl_pass1_tfrozen_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 12 10:22:23 2013] Warning, spatial fit 18 centroid is now closest to src. 4
[Wed Jun 12 10:22:23 2013] Vigneting correction estimate = 1.000000
[Wed Jun 12 10:22:23 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 12 10:22:23 2013] Assessing source extent using major
[Wed Jun 12 10:22:23 2013] Source does appear to be extended
[Wed Jun 12 10:22:23 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 12 10:22:37 2013] XMMSAS src. selection expression = ellipse(32095.679504, 36405.949646, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Jun 12 10:22:37 2013] Writing source region out to fullrun_pn_xmm0511580301_pi300-10000_pass1_cl_src18_src.reg
[Wed Jun 12 10:22:37 2013] Extracting stamp from image fullrun_pn_xmm0511580301_pi300-10000_cl_sm2.00.img.gz, (332, 382) - (407, 457)
[Wed Jun 12 10:22:37 2013] XMMSAS bgd. selection expression = annulus(32095.679504, 36405.949646, 1087.500000, 2175.000000, X, Y) && !ellipse(30206.604919, 34904.103119, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30001.116272, 38743.567535, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Jun 12 10:22:37 2013] Writing fullrun_pn_xmm0511580301_pi300-10000_pass1_cl_src18.gif
[Wed Jun 12 10:50:33 2013] Mean detx,y = (-6997.08, -8906.06) 
[Wed Jun 12 10:50:39 2013] Setting backscal keywords in source and bgd. spectrum
[Wed Jun 12 10:51:03 2013] Binned source spectrum to 10 counts/bin
[Wed Jun 12 10:51:03 2013] Setting source spectrum file to fullrun_pn_xmm0511580301_pi300-10000_pass1_cl_src18_src_b10.pi.gz
[Wed Jun 12 10:51:03 2013] Setting bgd. spectrum file to fullrun_pn_xmm0511580301_pi300-10000_pass1_cl_src18_bgd.pi.gz
[Wed Jun 12 11:29:33 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Jun 12 11:29:33 2013] rmf not generated due to insufficient counts
[Wed Jun 12 12:33:21 2013] Updating aperture counts using extracted products
[Wed Jun 12 12:33:21 2013] Total counts from fullrun_pn_xmm0511580301_pi300-10000_pass1_cl_src18_src_b10.pi.gz = 750.00
[Wed Jun 12 12:33:21 2013] Total counts from fullrun_pn_xmm0511580301_pi300-10000_pass1_cl_src18_bgd.pi.gz = 3589.00
[Wed Jun 12 12:33:21 2013] Got source and background scale factors 869324.000000, 3917253.000000
[Wed Jun 12 12:33:21 2013] User source parameters:
  Position = (369.5, 419.0) = 7 8 20.09 -49 24 10.6
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = -46.5 +/- 28.4
  Background aperture counts = 796.5
  Rate = -0.0006 +/- 0.0003

[Wed Jun 12 12:33:21 2013] Updating counts from extracted products
[Wed Jun 12 12:33:21 2013] Set source signif. to -46.48/28.22 = -1.65
[Wed Jun 12 12:33:24 2013] Calculating source flux in energy range 0.30-8.00
[Wed Jun 12 12:33:24 2013] Using photon index=1.80, rate=-0.000565, arf fullrun_pn_xmm0511580301_pi300-10000_pass1_cl_src18.arf
[Wed Jun 12 12:33:24 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jun 12 12:33:24 2013] Updated flux is not positive, keeping original flux
[Wed Jun 12 12:33:34 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Wed Jun 12 12:33:38 2013] xmm0511580301/analysis//spectral/fullrun_pn_xmm0511580301_pi300-10000_pass1_cl_src18_pl.csv not found, spectral fit skipped or did not complete