[Wed Jun 12 05:19:32 2013] Detection parameters:
  Position = (305.0, 522.4) = 7 8 48.83 -49 16 41.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 151.1 +/- 26.0
  Background counts = 190.3
  Rate = 0.001 +/- 0.0003

[Wed Jun 12 05:19:33 2013] Off-axis axis estimate = 16.24'
[Wed Jun 12 05:26:24 2013] Using EEF radius (= 14.55 ")to estimate initial spatial extent for simple fitting
[Wed Jun 12 05:26:24 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Jun 12 05:26:24 2013] Initial guess for spatial extent in simple fitting = 14.55"
[Wed Jun 12 05:26:24 2013] source mask rpix=3.3, npix_max = 59, mask sum = 56, frac = 0.947
[Wed Jun 12 05:26:24 2013] Giving source the simple spatial ID 15 for pass 0, mean size = 14.55"
[Wed Jun 12 06:38:07 2013] fullrun_pn_xmm0511580301_pi300-10000_cl_pass0_src15.ximg exists
[Wed Jun 12 06:38:07 2013] fullrun_pn_xmm0511580301_pi300-10000_cl_pass0_src15_1.ximg exists
[Wed Jun 12 06:38:07 2013] Fit fullrun_pn_xmm0511580301_pi300-10000_cl_pass0_src15 appears to have run properly
[Wed Jun 12 06:38:07 2013] fullrun_pn_xmm0511580301_pi300-10000_cl_pass0_tfrozen_src15.ximg exists
[Wed Jun 12 06:38:07 2013] fullrun_pn_xmm0511580301_pi300-10000_cl_pass0_tfrozen_src15_1.ximg exists
[Wed Jun 12 06:38:07 2013] Fit fullrun_pn_xmm0511580301_pi300-10000_cl_pass0_tfrozen_src15 appears to have run properly
[Wed Jun 12 08:01:39 2013] Spatial fit model total counts = 1947.350000, observed total counts = 1770.000000
[Wed Jun 12 08:01:39 2013] Poor agreement between spatial fit and data for source 15
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed Jun 12 08:01:39 2013] Vigneting correction estimate = 1.000000
[Wed Jun 12 08:01:39 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 12 08:01:39 2013] Assessing source extent using major
[Wed Jun 12 08:01:39 2013] Source does appear to be extended
[Wed Jun 12 08:01:39 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 12 08:01:57 2013] Using EEF radius (= 14.55 ")to estimate initial spatial extent for simple fitting
[Wed Jun 12 08:01:57 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Jun 12 08:01:57 2013] Initial guess for spatial extent in simple fitting = 14.55"
[Wed Jun 12 08:01:57 2013] source mask rpix=3.3, npix_max = 59, mask sum = 56, frac = 0.947
[Wed Jun 12 08:01:57 2013] Giving source the simple spatial ID 15 for pass 1, mean size = 14.55"
[Wed Jun 12 09:05:32 2013] fullrun_pn_xmm0511580301_pi300-10000_cl_pass1_src15.ximg exists
[Wed Jun 12 09:05:32 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0511580301_pi300-10000_cl_pass1_src15.csv
[Wed Jun 12 09:05:32 2013] fullrun_pn_xmm0511580301_pi300-10000_cl_pass1_src15_1.ximg exists
[Wed Jun 12 09:05:32 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0511580301_pi300-10000_cl_pass1_src15.csv
[Wed Jun 12 09:05:32 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0511580301_pi300-10000_cl_pass1_src15_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0511580301_pi300-10000_cl_pass1_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 12 09:05:33 2013] fullrun_pn_xmm0511580301_pi300-10000_cl_pass1_tfrozen_src15.ximg exists
[Wed Jun 12 09:05:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0511580301_pi300-10000_cl_pass1_tfrozen_src15.csv
[Wed Jun 12 09:05:33 2013] fullrun_pn_xmm0511580301_pi300-10000_cl_pass1_tfrozen_src15_1.ximg exists
[Wed Jun 12 09:05:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0511580301_pi300-10000_cl_pass1_tfrozen_src15.csv
[Wed Jun 12 09:05:33 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0511580301_pi300-10000_cl_pass1_tfrozen_src15_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0511580301_pi300-10000_cl_pass1_tfrozen_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 12 10:22:23 2013] Source 15 is offset by -3.547252 and 8.218332 pixels which is larger than
2 X fitted extent = 1.583012 x 1.583012, not incorporating fit results
[Wed Jun 12 10:22:23 2013] Warning: source 15 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 15 at 13.672967 pixels away
[Wed Jun 12 10:22:23 2013] Vigneting correction estimate = 1.000000
[Wed Jun 12 10:22:23 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 12 10:22:23 2013] Assessing source extent using major
[Wed Jun 12 10:22:23 2013] Source does appear to be extended
[Wed Jun 12 10:22:23 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 12 10:22:37 2013] XMMSAS src. selection expression = ellipse(26486.027405, 45398.756897, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Jun 12 10:22:37 2013] Writing source region out to fullrun_pn_xmm0511580301_pi300-10000_pass1_cl_src15_src.reg
[Wed Jun 12 10:22:37 2013] Extracting stamp from image fullrun_pn_xmm0511580301_pi300-10000_cl_sm2.00.img.gz, (267, 485) - (342, 560)
[Wed Jun 12 10:22:37 2013] XMMSAS bgd. selection expression = annulus(26486.027405, 45398.756897, 1087.500000, 2175.000000, X, Y) && !ellipse(26828.627075, 43516.484497, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Jun 12 10:22:37 2013] Writing fullrun_pn_xmm0511580301_pi300-10000_pass1_cl_src15.gif
[Wed Jun 12 10:46:42 2013] Mean detx,y = (-17634.96, -8664.31) 
[Wed Jun 12 10:46:45 2013] Setting backscal keywords in source and bgd. spectrum
[Wed Jun 12 10:47:11 2013] Binned source spectrum to 10 counts/bin
[Wed Jun 12 10:47:11 2013] Setting source spectrum file to fullrun_pn_xmm0511580301_pi300-10000_pass1_cl_src15_src_b10.pi.gz
[Wed Jun 12 10:47:11 2013] Setting bgd. spectrum file to fullrun_pn_xmm0511580301_pi300-10000_pass1_cl_src15_bgd.pi.gz
[Wed Jun 12 11:28:45 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Jun 12 11:28:45 2013] rmf not generated due to insufficient counts
[Wed Jun 12 12:33:20 2013] Updating aperture counts using extracted products
[Wed Jun 12 12:33:20 2013] Total counts from fullrun_pn_xmm0511580301_pi300-10000_pass1_cl_src15_src_b10.pi.gz = 988.00
[Wed Jun 12 12:33:20 2013] Total counts from fullrun_pn_xmm0511580301_pi300-10000_pass1_cl_src15_bgd.pi.gz = 1915.00
[Wed Jun 12 12:33:20 2013] Got source and background scale factors 1297892.000000, 2656724.000000
[Wed Jun 12 12:33:20 2013] User source parameters:
  Position = (305.0, 522.4) = 7 8 48.83 -49 16 41.1
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 52.5 +/- 32.4
  Background aperture counts = 935.5
  Rate = 0.0006 +/- 0.0004

[Wed Jun 12 12:33:20 2013] Updating counts from extracted products
[Wed Jun 12 12:33:20 2013] Set source signif. to 52.46/30.59 = 1.72
[Wed Jun 12 12:33:24 2013] Calculating source flux in energy range 0.30-8.00
[Wed Jun 12 12:33:24 2013] Using photon index=1.80, rate=0.000638, arf fullrun_pn_xmm0511580301_pi300-10000_pass1_cl_src15.arf
[Wed Jun 12 12:33:24 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jun 12 12:33:24 2013] Updating source flux to 6.7e-15
[Wed Jun 12 12:33:34 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Wed Jun 12 12:33:38 2013] xmm0511580301/analysis//spectral/fullrun_pn_xmm0511580301_pi300-10000_pass1_cl_src15_pl.csv not found, spectral fit skipped or did not complete