[Wed Jun 12 05:19:32 2013] Detection parameters:
  Position = (357.5, 313.5) = 7 8 25.35 -49 32 0.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 406.0 +/- 31.1
  Background counts = 320.4
  Rate = 0.004 +/- 0.0003

[Wed Jun 12 05:19:33 2013] Off-axis axis estimate = 4.42'
[Wed Jun 12 05:26:24 2013] Using EEF radius (= 8.64 ")to estimate initial spatial extent for simple fitting
[Wed Jun 12 05:26:24 2013] Initial guess for spatial extent in simple fitting = 8.64"
[Wed Jun 12 05:26:24 2013] source mask rpix=2.0, npix_max = 24, mask sum = 16, frac = 0.647
[Wed Jun 12 05:26:24 2013] Giving source the simple spatial ID 12 for pass 0, mean size = 8.64"
[Wed Jun 12 06:38:07 2013] fullrun_pn_xmm0511580301_pi300-10000_cl_pass0_src12.ximg exists
[Wed Jun 12 06:38:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0511580301_pi300-10000_cl_pass0_src12.csv
[Wed Jun 12 06:38:07 2013] fullrun_pn_xmm0511580301_pi300-10000_cl_pass0_src12_1.ximg exists
[Wed Jun 12 06:38:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0511580301_pi300-10000_cl_pass0_src12.csv
[Wed Jun 12 06:38:07 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0511580301_pi300-10000_cl_pass0_src12_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0511580301_pi300-10000_cl_pass0_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 12 06:38:07 2013] fullrun_pn_xmm0511580301_pi300-10000_cl_pass0_tfrozen_src12.ximg exists
[Wed Jun 12 06:38:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0511580301_pi300-10000_cl_pass0_tfrozen_src12.csv
[Wed Jun 12 06:38:07 2013] fullrun_pn_xmm0511580301_pi300-10000_cl_pass0_tfrozen_src12_1.ximg exists
[Wed Jun 12 06:38:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0511580301_pi300-10000_cl_pass0_tfrozen_src12.csv
[Wed Jun 12 06:38:07 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0511580301_pi300-10000_cl_pass0_tfrozen_src12_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0511580301_pi300-10000_cl_pass0_tfrozen_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 12 08:01:39 2013] Source 12 is offset by -2.335642 and -8.074464 pixels which is larger than
2 X fitted extent = 2.005954 x 3.261890, not incorporating fit results
[Wed Jun 12 08:01:39 2013] Vigneting correction estimate = 1.000000
[Wed Jun 12 08:01:39 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 12 08:01:39 2013] Assessing source extent using major
[Wed Jun 12 08:01:39 2013] Source does appear to be extended
[Wed Jun 12 08:01:39 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 12 08:01:57 2013] Using EEF radius (= 8.64 ")to estimate initial spatial extent for simple fitting
[Wed Jun 12 08:01:57 2013] Initial guess for spatial extent in simple fitting = 8.64"
[Wed Jun 12 08:01:57 2013] source mask rpix=2.0, npix_max = 24, mask sum = 16, frac = 0.647
[Wed Jun 12 08:01:57 2013] Giving source the simple spatial ID 12 for pass 1, mean size = 8.64"
[Wed Jun 12 09:05:32 2013] fullrun_pn_xmm0511580301_pi300-10000_cl_pass1_src12.ximg exists
[Wed Jun 12 09:05:32 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0511580301_pi300-10000_cl_pass1_src12.csv
[Wed Jun 12 09:05:32 2013] fullrun_pn_xmm0511580301_pi300-10000_cl_pass1_src12_1.ximg exists
[Wed Jun 12 09:05:32 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0511580301_pi300-10000_cl_pass1_src12.csv
[Wed Jun 12 09:05:32 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0511580301_pi300-10000_cl_pass1_src12_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0511580301_pi300-10000_cl_pass1_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 12 09:05:33 2013] fullrun_pn_xmm0511580301_pi300-10000_cl_pass1_tfrozen_src12.ximg exists
[Wed Jun 12 09:05:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0511580301_pi300-10000_cl_pass1_tfrozen_src12.csv
[Wed Jun 12 09:05:33 2013] fullrun_pn_xmm0511580301_pi300-10000_cl_pass1_tfrozen_src12_1.ximg exists
[Wed Jun 12 09:05:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0511580301_pi300-10000_cl_pass1_tfrozen_src12.csv
[Wed Jun 12 09:05:33 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0511580301_pi300-10000_cl_pass1_tfrozen_src12_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0511580301_pi300-10000_cl_pass1_tfrozen_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 12 10:22:23 2013] Source 12 is offset by -2.337435 and -8.230395 pixels which is larger than
2 X fitted extent = 2.009522 x 3.373747, not incorporating fit results
[Wed Jun 12 10:22:23 2013] Vigneting correction estimate = 1.000000
[Wed Jun 12 10:22:23 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 12 10:22:23 2013] Assessing source extent using major
[Wed Jun 12 10:22:23 2013] Source does appear to be extended
[Wed Jun 12 10:22:23 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 12 10:22:37 2013] XMMSAS src. selection expression = ellipse(31055.861176, 27228.065613, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Jun 12 10:22:37 2013] Writing source region out to fullrun_pn_xmm0511580301_pi300-10000_pass1_cl_src12_src.reg
[Wed Jun 12 10:22:37 2013] Extracting stamp from image fullrun_pn_xmm0511580301_pi300-10000_cl_sm2.00.img.gz, (320, 276) - (395, 351)
[Wed Jun 12 10:22:37 2013] XMMSAS bgd. selection expression = annulus(31055.861176, 27228.065613, 1087.500000, 2175.000000, X, Y) && !ellipse(27937.563000, 25720.189000, 1590.036046, 1575.768045, 260.325400, X, Y) && !ellipse(31269.624322, 27853.325800, 417.664012, 417.664012, 0.000000, X, Y) && !ellipse(28486.576050, 27018.485565, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29021.078583, 26591.397552, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31107.092621, 26540.009460, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29406.679108, 25588.991241, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29666.463104, 24780.795013, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Jun 12 10:22:37 2013] Writing fullrun_pn_xmm0511580301_pi300-10000_pass1_cl_src12.gif
[Wed Jun 12 10:43:46 2013] Mean detx,y = (304.29, -3650.98) 
[Wed Jun 12 10:43:52 2013] Setting backscal keywords in source and bgd. spectrum
[Wed Jun 12 10:44:03 2013] Binned source spectrum to 10 counts/bin
[Wed Jun 12 10:44:03 2013] Setting source spectrum file to fullrun_pn_xmm0511580301_pi300-10000_pass1_cl_src12_src_b10.pi.gz
[Wed Jun 12 10:44:03 2013] Setting bgd. spectrum file to fullrun_pn_xmm0511580301_pi300-10000_pass1_cl_src12_bgd.pi.gz
[Wed Jun 12 11:25:53 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Jun 12 11:25:53 2013] rmf not generated due to insufficient counts
[Wed Jun 12 12:33:19 2013] Updating aperture counts using extracted products
[Wed Jun 12 12:33:19 2013] Total counts from fullrun_pn_xmm0511580301_pi300-10000_pass1_cl_src12_src_b10.pi.gz = 1640.00
[Wed Jun 12 12:33:19 2013] Total counts from fullrun_pn_xmm0511580301_pi300-10000_pass1_cl_src12_bgd.pi.gz = 8918.00
[Wed Jun 12 12:33:19 2013] Got source and background scale factors 1049269.000000, 8293516.000000
[Wed Jun 12 12:33:20 2013] User source parameters:
  Position = (357.5, 313.5) = 7 8 25.35 -49 32 0.4
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 511.7 +/- 41.5
  Background aperture counts = 1128.3
  Rate = 0.006 +/- 0.0005

[Wed Jun 12 12:33:20 2013] Updating counts from extracted products
[Wed Jun 12 12:33:20 2013] Set source signif. to 511.72/33.59 = 15.23
[Wed Jun 12 12:33:24 2013] Calculating source flux in energy range 0.30-8.00
[Wed Jun 12 12:33:24 2013] Using photon index=1.80, rate=0.00623, arf fullrun_pn_xmm0511580301_pi300-10000_pass1_cl_src12.arf
[Wed Jun 12 12:33:24 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jun 12 12:33:24 2013] Updating source flux to 2.4e-14
[Wed Jun 12 12:33:34 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Wed Jun 12 12:33:38 2013] xmm0511580301/analysis//spectral/fullrun_pn_xmm0511580301_pi300-10000_pass1_cl_src12_pl.csv not found, spectral fit skipped or did not complete