[Wed Jun 12 05:20:12 2013] Detection parameters:
  Position = (460.2, 193.3) = 7 7 39.27 -49 40 33.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 148.5 +/- 19.2
  Background counts = 87.9
  Rate = 0.001 +/- 0.0002

[Wed Jun 12 05:20:12 2013] Off-axis axis estimate = 13.98'
[Wed Jun 12 07:03:53 2013] Using EEF radius (= 13.42 ")to estimate initial spatial extent for simple fitting
[Wed Jun 12 07:03:53 2013] Initial guess for spatial extent in simple fitting = 13.42"
[Wed Jun 12 07:03:53 2013] source mask rpix=3.1, npix_max = 51, mask sum = 49, frac = 0.953
[Wed Jun 12 07:03:53 2013] Giving source the simple spatial ID 26 for pass 0, mean size = 13.42"
[Wed Jun 12 08:01:32 2013] fullrun_mos2_xmm0511580301_pi300-10000_cl_pass0_src26.ximg exists
[Wed Jun 12 08:01:32 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0511580301_pi300-10000_cl_pass0_src26.csv
[Wed Jun 12 08:01:32 2013] fullrun_mos2_xmm0511580301_pi300-10000_cl_pass0_src26_1.ximg exists
[Wed Jun 12 08:01:32 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0511580301_pi300-10000_cl_pass0_src26.csv
[Wed Jun 12 08:01:32 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0511580301_pi300-10000_cl_pass0_src26_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0511580301_pi300-10000_cl_pass0_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 12 08:01:32 2013] fullrun_mos2_xmm0511580301_pi300-10000_cl_pass0_tfrozen_src26.ximg exists
[Wed Jun 12 08:01:32 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0511580301_pi300-10000_cl_pass0_tfrozen_src26.csv
[Wed Jun 12 08:01:32 2013] fullrun_mos2_xmm0511580301_pi300-10000_cl_pass0_tfrozen_src26_1.ximg exists
[Wed Jun 12 08:01:32 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0511580301_pi300-10000_cl_pass0_tfrozen_src26.csv
[Wed Jun 12 08:01:32 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0511580301_pi300-10000_cl_pass0_tfrozen_src26_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0511580301_pi300-10000_cl_pass0_tfrozen_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 12 08:01:49 2013] Warning: source 26 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 29 at 18.734613 pixels away
[Wed Jun 12 08:01:49 2013] Vigneting correction estimate = 1.000000
[Wed Jun 12 08:01:49 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 12 08:01:49 2013] Assessing source extent using major
[Wed Jun 12 08:01:49 2013] Source does appear to be extended
[Wed Jun 12 08:01:49 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 12 08:01:49 2013] Deleting source due to low Poisson probability 0.9