[Wed Jun 12 05:20:12 2013] Detection parameters:
  Position = (207.8, 228.1) = 7 9 32.32 -49 38 1.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 101.4 +/- 15.7
  Background counts = 98.1
  Rate = 0.002 +/- 0.0003

[Wed Jun 12 05:20:12 2013] Off-axis axis estimate = 8.32'
[Wed Jun 12 07:03:53 2013] Using EEF radius (= 10.59 ")to estimate initial spatial extent for simple fitting
[Wed Jun 12 07:03:53 2013] Initial guess for spatial extent in simple fitting = 10.59"
[Wed Jun 12 07:03:53 2013] source mask rpix=2.4, npix_max = 34, mask sum = 30, frac = 0.871
[Wed Jun 12 07:03:53 2013] Giving source the simple spatial ID 20 for pass 0, mean size = 10.59"
[Wed Jun 12 08:01:32 2013] fullrun_mos2_xmm0511580301_pi300-10000_cl_pass0_src20.ximg exists
[Wed Jun 12 08:01:32 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0511580301_pi300-10000_cl_pass0_src20.csv
[Wed Jun 12 08:01:32 2013] fullrun_mos2_xmm0511580301_pi300-10000_cl_pass0_src20_1.ximg exists
[Wed Jun 12 08:01:32 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0511580301_pi300-10000_cl_pass0_src20.csv
[Wed Jun 12 08:01:32 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0511580301_pi300-10000_cl_pass0_src20_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0511580301_pi300-10000_cl_pass0_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 12 08:01:32 2013] fullrun_mos2_xmm0511580301_pi300-10000_cl_pass0_tfrozen_src20.ximg exists
[Wed Jun 12 08:01:32 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0511580301_pi300-10000_cl_pass0_tfrozen_src20.csv
[Wed Jun 12 08:01:32 2013] fullrun_mos2_xmm0511580301_pi300-10000_cl_pass0_tfrozen_src20_1.ximg exists
[Wed Jun 12 08:01:32 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0511580301_pi300-10000_cl_pass0_tfrozen_src20.csv
[Wed Jun 12 08:01:32 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0511580301_pi300-10000_cl_pass0_tfrozen_src20_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0511580301_pi300-10000_cl_pass0_tfrozen_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 12 08:01:49 2013] Spatial fit model total counts = 679.164000, observed total counts = 576.000000
[Wed Jun 12 08:01:49 2013] Poor agreement between spatial fit and data for source 26
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed Jun 12 08:01:49 2013] Vigneting correction estimate = 1.000000
[Wed Jun 12 08:01:49 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 12 08:01:49 2013] Assessing source extent using major
[Wed Jun 12 08:01:49 2013] Source does appear to be extended
[Wed Jun 12 08:01:49 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 12 08:01:49 2013] Deleting source due to low Poisson probability 0.8