[Fri Dec 30 11:54:22 2011] Detection parameters:
  Position = (223.8, 225.3) = 7 9 25.72 -49 38 11.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 331.6 +/- 25.2
  Background counts = 66.3
  Rate = 0.005 +/- 0.0004

[Fri Dec 30 11:54:22 2011] Off-axis axis estimate = 7.58'
[Fri Dec 30 17:06:56 2011] Using EEF radius (= 10.22 ")to estimate initial spatial extent for simple fitting
[Fri Dec 30 17:06:56 2011] Initial guess for spatial extent in simple fitting = 10.22"
[Fri Dec 30 17:06:56 2011] source mask rpix=2.3, npix_max = 32, mask sum = 36, frac = 1.109
[Fri Dec 30 17:06:56 2011] Giving source the simple spatial ID 4 for pass 0, mean size = 10.22"
[Fri Dec 30 20:25:33 2011] fullrun_mos2_xmm0511580201_pi300-10000_cl_pass0_src4.ximg exists
[Fri Dec 30 20:25:33 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0511580201_pi300-10000_cl_pass0_src4.csv
[Fri Dec 30 20:25:33 2011] fullrun_mos2_xmm0511580201_pi300-10000_cl_pass0_src4_1.ximg exists
[Fri Dec 30 20:25:33 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0511580201_pi300-10000_cl_pass0_src4.csv
[Fri Dec 30 20:25:33 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0511580201_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0511580201_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Dec 30 20:25:34 2011] fullrun_mos2_xmm0511580201_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Fri Dec 30 20:25:34 2011] fullrun_mos2_xmm0511580201_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Fri Dec 30 20:25:34 2011] Fit fullrun_mos2_xmm0511580201_pi300-10000_cl_pass0_tfrozen_src4 appears to have run properly
[Fri Dec 30 20:25:59 2011] Warning: source 4 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 30 at 12.186765 pixels away
[Fri Dec 30 20:25:59 2011] Warning: source 23 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 30 at 10.394598 pixels away
[Fri Dec 30 20:25:59 2011] Vigneting correction estimate = 1.000000
[Fri Dec 30 20:25:59 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Dec 30 20:25:59 2011] Assessing source extent using major
[Fri Dec 30 20:25:59 2011] Source does appear to be extended
[Fri Dec 30 20:25:59 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Dec 30 23:50:36 2011] Using EEF radius (= 10.22 ")to estimate initial spatial extent for simple fitting
[Fri Dec 30 23:50:36 2011] Initial guess for spatial extent in simple fitting = 10.22"
[Fri Dec 30 23:50:36 2011] source mask rpix=2.3, npix_max = 32, mask sum = 36, frac = 1.109
[Fri Dec 30 23:50:36 2011] Giving source the simple spatial ID 4 for pass 1, mean size = 10.22"
[Sat Dec 31 01:41:36 2011] fullrun_mos2_xmm0511580201_pi300-10000_cl_pass1_src4.ximg exists
[Sat Dec 31 01:41:36 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0511580201_pi300-10000_cl_pass1_src4.csv
[Sat Dec 31 01:41:36 2011] fullrun_mos2_xmm0511580201_pi300-10000_cl_pass1_src4_1.ximg exists
[Sat Dec 31 01:41:36 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0511580201_pi300-10000_cl_pass1_src4.csv
[Sat Dec 31 01:41:36 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0511580201_pi300-10000_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0511580201_pi300-10000_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Dec 31 01:41:36 2011] fullrun_mos2_xmm0511580201_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Sat Dec 31 01:41:36 2011] fullrun_mos2_xmm0511580201_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Sat Dec 31 01:41:36 2011] Fit fullrun_mos2_xmm0511580201_pi300-10000_cl_pass1_tfrozen_src4 appears to have run properly
[Sat Dec 31 01:41:56 2011] Warning: source 4 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 30 at 13.277108 pixels away
[Sat Dec 31 01:41:56 2011] Vigneting correction estimate = 1.000000
[Sat Dec 31 01:41:56 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Dec 31 01:41:56 2011] Assessing source extent using major
[Sat Dec 31 01:41:56 2011] Source does appear to be extended
[Sat Dec 31 01:41:56 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Dec 31 07:06:33 2011] XMMSAS src. selection expression = ellipse(19423.565842, 19549.224396, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Dec 31 07:06:33 2011] Writing source region out to fullrun_mos2_xmm0511580201_pi300-10000_pass1_cl_src30_src.reg
[Sat Dec 31 07:06:33 2011] Extracting stamp from image fullrun_mos2_xmm0511580201_pi300-10000_cl_sm2.00.img.gz, (186, 188) - (261, 263)
[Sat Dec 31 07:06:33 2011] XMMSAS bgd. selection expression = annulus(19423.565842, 19549.224396, 1087.500000, 2175.000000, X, Y) && !ellipse(21706.354620, 20068.040400, 436.380013, 436.380013, 0.000000, X, Y)
[Sat Dec 31 07:06:33 2011] Writing fullrun_mos2_xmm0511580201_pi300-10000_pass1_cl_src30.gif
[Sat Dec 31 07:16:20 2011] Mean detx,y = (-1522.82, -10307.25) 
[Sat Dec 31 07:16:23 2011] Setting backscal keywords in source and bgd. spectrum
[Sat Dec 31 07:17:10 2011] Binned source spectrum to 10 counts/bin
[Sat Dec 31 07:17:10 2011] Setting source spectrum file to fullrun_mos2_xmm0511580201_pi300-10000_pass1_cl_src30_src_b10.pi.gz
[Sat Dec 31 07:17:10 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0511580201_pi300-10000_pass1_cl_src30_bgd.pi.gz
[Sat Dec 31 07:36:47 2011] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Dec 31 07:36:47 2011] rmf not generated due to insufficient counts
[Sat Dec 31 08:31:00 2011] Updating aperture counts using extracted products
[Sat Dec 31 08:31:00 2011] Error reading totcts from fullrun_mos2_xmm0511580201_pi300-10000_pass1_cl_src30_src_b10.pi.gz
[Sat Dec 31 08:31:02 2011] Calculating source flux in energy range 0.30-8.00
[Sat Dec 31 08:31:02 2011] Using photon index=1.80, rate=0.00506, arf fullrun_mos2_xmm0511580201_pi300-10000_pass1_cl_src30.arf
[Sat Dec 31 08:31:02 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Dec 31 08:31:02 2011] Updating source flux to 8.3e-14
[Sat Dec 31 08:31:25 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting