[Fri Dec 30 11:54:21 2011] Detection parameters:
  Position = (322.6, 295.8) = 7 8 41.51 -49 33 6.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 131079.9 +/- 425.5
  Background counts = 97.2
  Rate = 1 +/- 0.004

[Fri Dec 30 11:54:22 2011] Off-axis axis estimate = 1.76'
[Fri Dec 30 17:06:56 2011] Using EEF radius (= 7.31 ")to estimate initial spatial extent for simple fitting
[Fri Dec 30 17:06:56 2011] Initial guess for spatial extent in simple fitting = 7.31"
[Fri Dec 30 17:06:56 2011] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.052
[Fri Dec 30 17:06:56 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 7.31"
[Fri Dec 30 20:25:33 2011] fullrun_mos2_xmm0511580201_pi300-10000_cl_pass0_src1.ximg exists
[Fri Dec 30 20:25:33 2011] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0511580201_pi300-10000_cl_pass0_src1.csv
[Fri Dec 30 20:25:33 2011] fullrun_mos2_xmm0511580201_pi300-10000_cl_pass0_src1_1.ximg exists
[Fri Dec 30 20:25:33 2011] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0511580201_pi300-10000_cl_pass0_src1.csv
[Fri Dec 30 20:25:33 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0511580201_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0511580201_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Dec 30 20:25:34 2011] fullrun_mos2_xmm0511580201_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Fri Dec 30 20:25:34 2011] fullrun_mos2_xmm0511580201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Dec 30 20:25:34 2011] Fit fullrun_mos2_xmm0511580201_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Dec 30 20:25:59 2011] Spatial fit model total counts = 117557.000000, observed total counts = 117603.000000
[Fri Dec 30 20:25:59 2011] Offset between fit and detection position for source 3 = 0.173894 pixels
[Fri Dec 30 20:25:59 2011] 117564.600000 total counts/ 24477.500000 bgd. counts: snr = 594.984937
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.173894 pixels
  Position = (322.5, 295.7) = 7 8 41.56 -49 33 6.7
  Extent = 5.4 (5.4-5.5)", rotation angle = 0
  Source counts = 93087.1 +/- 342.9
  Background counts = 24477.5
  Rate = 0.9 +/- 0.003
[Fri Dec 30 20:25:59 2011] Vigneting correction estimate = 1.000000
[Fri Dec 30 20:25:59 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Dec 30 20:25:59 2011] Assessing source extent using major axis lower bound
[Fri Dec 30 20:25:59 2011] Source does appear to be extended
[Fri Dec 30 20:25:59 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Dec 30 23:50:36 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Dec 30 23:50:36 2011] Initial guess for spatial extent in simple fitting = 5.44"
[Fri Dec 30 23:50:36 2011] source mask rpix=1.3, npix_max = 12, mask sum = 9, frac = 0.734
[Fri Dec 30 23:50:36 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 5.44"
[Sat Dec 31 01:41:36 2011] fullrun_mos2_xmm0511580201_pi300-10000_cl_pass1_src1.ximg exists
[Sat Dec 31 01:41:36 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0511580201_pi300-10000_cl_pass1_src1.csv
[Sat Dec 31 01:41:36 2011] fullrun_mos2_xmm0511580201_pi300-10000_cl_pass1_src1_1.ximg exists
[Sat Dec 31 01:41:36 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0511580201_pi300-10000_cl_pass1_src1.csv
[Sat Dec 31 01:41:36 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0511580201_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0511580201_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Dec 31 01:41:36 2011] fullrun_mos2_xmm0511580201_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sat Dec 31 01:41:36 2011] fullrun_mos2_xmm0511580201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sat Dec 31 01:41:36 2011] Fit fullrun_mos2_xmm0511580201_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sat Dec 31 01:41:56 2011] Spatial fit model total counts = 117379.000000, observed total counts = 117478.000000
[Sat Dec 31 01:41:56 2011] Offset between fit and detection position for source 3 = 0.014990 pixels
[Sat Dec 31 01:41:56 2011] 117856.800000 total counts/ 24533.000000 bgd. counts: snr = 595.822754
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.014990 pixels
  Position = (322.5, 295.7) = 7 8 41.56 -49 33 6.8
  Extent = 5.5 (5.4-5.5)", rotation angle = 0
  Source counts = 93323.8 +/- 343.3
  Background counts = 24533.0
  Rate = 0.9 +/- 0.003
[Sat Dec 31 01:41:56 2011] Vigneting correction estimate = 1.000000
[Sat Dec 31 01:41:56 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Dec 31 01:41:56 2011] Assessing source extent using major axis lower bound
[Sat Dec 31 01:41:56 2011] Source does appear to be extended
[Sat Dec 31 01:41:56 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Dec 31 07:06:33 2011] Counts = 93323.800000, rescaling region sizes by 3.000000
[Sat Dec 31 07:06:33 2011] XMMSAS src. selection expression = ellipse(28008.332800, 25673.501400, 982.717228, 982.717228, 0.000000, X, Y)
[Sat Dec 31 07:06:33 2011] Writing source region out to fullrun_mos2_xmm0511580201_pi300-10000_pass1_cl_src3_src.reg
[Sat Dec 31 07:06:33 2011] Extracting stamp from image fullrun_mos2_xmm0511580201_pi300-10000_cl_sm2.00.img.gz, (266, 239) - (379, 352)
[Sat Dec 31 07:06:33 2011] XMMSAS bgd. selection expression = annulus(28008.332800, 25673.501400, 4913.586141, 9827.172283, X, Y) && !ellipse(19423.565842, 19549.224396, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28316.566559, 24797.718170, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28808.819611, 25142.625061, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19744.416840, 29953.360260, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27723.470340, 17631.208400, 598.740711, 598.740711, 0.000000, X, Y) && !ellipse(37171.835327, 34999.585938, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21706.354620, 20068.040400, 436.380013, 436.380013, 0.000000, X, Y) && !ellipse(34708.002655, 27228.559448, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Dec 31 07:06:33 2011] Writing fullrun_mos2_xmm0511580201_pi300-10000_pass1_cl_src3.gif
[Sat Dec 31 07:07:04 2011] Mean detx,y = (31.16, 108.93) 
[Sat Dec 31 07:07:10 2011] Setting backscal keywords in source and bgd. spectrum
[Sat Dec 31 07:10:51 2011] Binned source spectrum to 10 counts/bin
[Sat Dec 31 07:10:52 2011] Setting source spectrum file to fullrun_mos2_xmm0511580201_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Sat Dec 31 07:10:52 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0511580201_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Sat Dec 31 08:31:00 2011] Updating aperture counts using extracted products
[Sat Dec 31 08:31:00 2011] Error reading totcts from fullrun_mos2_xmm0511580201_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Sat Dec 31 08:31:01 2011] Calculating source flux in energy range 0.30-8.00
[Sat Dec 31 08:31:01 2011] Using photon index=1.80, rate=0.931, arf fullrun_mos2_xmm0511580201_pi300-10000_pass1_cl_src3.arf
[Sat Dec 31 08:31:01 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Dec 31 08:31:01 2011] Updating source flux to 9.6e-12
[Sat Dec 31 08:33:18 2011] Reading fit data from xmm0511580201/analysis//spectral/fullrun_mos2_xmm0511580201_pi300-10000_pass1_cl_src3_pl.csv
[Sat Dec 31 08:33:18 2011] Spectral fit parameter nH value = 1.06087e+21
[Sat Dec 31 08:33:18 2011] Spectral fit parameter PhoIndex value = 3.6935
[Sat Dec 31 08:33:18 2011] Failed to get F(0.3-8.0) from xmm0511580201/analysis//spectral/fullrun_mos2_xmm0511580201_pi300-10000_pass1_cl_src3_pl.csv, possibly due to different flux energy range selected
[Sat Dec 31 08:33:18 2011] Calculating source flux in energy range 0.30-8.00
[Sat Dec 31 08:33:18 2011] Using Nh = 1.1e+21, photon index=3.69, rate=0.931, arf fullrun_mos2_xmm0511580201_pi300-10000_pass1_cl_src3.arf
[Sat Dec 31 08:33:18 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Dec 31 08:33:18 2011] Updating source flux to 6.6e-12