[Fri Dec 30 11:54:22 2011] Detection parameters:
  Position = (326.0, 285.6) = 7 8 39.97 -49 33 57.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 245.1 +/- 26.7
  Background counts = 98.6
  Rate = 0.004 +/- 0.0004

[Fri Dec 30 11:54:22 2011] Off-axis axis estimate = 2.21'
[Fri Dec 30 17:06:56 2011] Using EEF radius (= 7.53 ")to estimate initial spatial extent for simple fitting
[Fri Dec 30 17:06:56 2011] Initial guess for spatial extent in simple fitting = 7.53"
[Fri Dec 30 17:06:56 2011] source mask rpix=1.7, npix_max = 19, mask sum = 12, frac = 0.602
[Fri Dec 30 17:06:56 2011] Giving source the simple spatial ID 7 for pass 0, mean size = 7.53"
[Fri Dec 30 20:25:33 2011] fullrun_mos2_xmm0511580201_pi300-10000_cl_pass0_src7.ximg exists
[Fri Dec 30 20:25:33 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0511580201_pi300-10000_cl_pass0_src7.csv
[Fri Dec 30 20:25:33 2011] fullrun_mos2_xmm0511580201_pi300-10000_cl_pass0_src7_1.ximg exists
[Fri Dec 30 20:25:33 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0511580201_pi300-10000_cl_pass0_src7.csv
[Fri Dec 30 20:25:33 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0511580201_pi300-10000_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0511580201_pi300-10000_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Dec 30 20:25:34 2011] fullrun_mos2_xmm0511580201_pi300-10000_cl_pass0_tfrozen_src7.ximg exists
[Fri Dec 30 20:25:34 2011] fullrun_mos2_xmm0511580201_pi300-10000_cl_pass0_tfrozen_src7_1.ximg exists
[Fri Dec 30 20:25:34 2011] Fit fullrun_mos2_xmm0511580201_pi300-10000_cl_pass0_tfrozen_src7 appears to have run properly
[Fri Dec 30 20:25:59 2011] Source 23 is offset by 4.040673 and -7.337377 pixels which is larger than
2 X fitted extent = 2.645890 x 2.645890, not incorporating fit results
[Fri Dec 30 20:25:59 2011] Spatial fit model total counts = -11136.000000, observed total counts = 50230.000000
[Fri Dec 30 20:25:59 2011] Poor agreement between spatial fit and data for source 23
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri Dec 30 20:25:59 2011] Vigneting correction estimate = 1.000000
[Fri Dec 30 20:25:59 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Dec 30 20:25:59 2011] Assessing source extent using major
[Fri Dec 30 20:25:59 2011] Source does appear to be extended
[Fri Dec 30 20:25:59 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Dec 30 20:25:59 2011] Source is confused with source 22
[Fri Dec 30 23:50:36 2011] Using EEF radius (= 7.53 ")to estimate initial spatial extent for simple fitting
[Fri Dec 30 23:50:36 2011] Initial guess for spatial extent in simple fitting = 7.53"
[Fri Dec 30 23:50:36 2011] source mask rpix=1.7, npix_max = 19, mask sum = 12, frac = 0.602
[Fri Dec 30 23:50:36 2011] Giving source the simple spatial ID 7 for pass 1, mean size = 7.53"
[Sat Dec 31 01:41:36 2011] fullrun_mos2_xmm0511580201_pi300-10000_cl_pass1_src7.ximg exists
[Sat Dec 31 01:41:36 2011] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0511580201_pi300-10000_cl_pass1_src7.csv
[Sat Dec 31 01:41:36 2011] fullrun_mos2_xmm0511580201_pi300-10000_cl_pass1_src7_1.ximg exists
[Sat Dec 31 01:41:36 2011] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0511580201_pi300-10000_cl_pass1_src7.csv
[Sat Dec 31 01:41:36 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0511580201_pi300-10000_cl_pass1_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0511580201_pi300-10000_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Dec 31 01:41:36 2011] fullrun_mos2_xmm0511580201_pi300-10000_cl_pass1_tfrozen_src7.ximg exists
[Sat Dec 31 01:41:36 2011] fullrun_mos2_xmm0511580201_pi300-10000_cl_pass1_tfrozen_src7_1.ximg exists
[Sat Dec 31 01:41:36 2011] Fit fullrun_mos2_xmm0511580201_pi300-10000_cl_pass1_tfrozen_src7 appears to have run properly
[Sat Dec 31 01:41:56 2011] Source 23 is offset by 4.047294 and -7.337377 pixels which is larger than
2 X fitted extent = 2.622920 x 2.622920, not incorporating fit results
[Sat Dec 31 01:41:56 2011] Warning: source 9 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 23 at 10.762623 pixels away
[Sat Dec 31 01:41:56 2011] Vigneting correction estimate = 1.000000
[Sat Dec 31 01:41:56 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Dec 31 01:41:56 2011] Assessing source extent using major
[Sat Dec 31 01:41:56 2011] Source does appear to be extended
[Sat Dec 31 01:41:56 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Dec 31 07:06:33 2011] XMMSAS src. selection expression = ellipse(28316.566559, 24797.718170, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Dec 31 07:06:33 2011] Writing source region out to fullrun_mos2_xmm0511580201_pi300-10000_pass1_cl_src23_src.reg
[Sat Dec 31 07:06:33 2011] Extracting stamp from image fullrun_mos2_xmm0511580201_pi300-10000_cl_sm2.00.img.gz, (289, 248) - (364, 323)
[Sat Dec 31 07:06:33 2011] XMMSAS bgd. selection expression = annulus(28316.566559, 24797.718170, 1087.500000, 2175.000000, X, Y) && !ellipse(28008.332800, 25673.501400, 1310.289638, 1310.289638, 0.000000, X, Y) && !ellipse(28808.819611, 25142.625061, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Dec 31 07:06:33 2011] Writing fullrun_mos2_xmm0511580201_pi300-10000_pass1_cl_src23.gif
[Sat Dec 31 07:19:02 2011] Mean detx,y = (-536.59, -15.23) 
[Sat Dec 31 07:19:06 2011] Setting backscal keywords in source and bgd. spectrum
[Sat Dec 31 07:19:30 2011] Binned source spectrum to 10 counts/bin
[Sat Dec 31 07:19:31 2011] Setting source spectrum file to fullrun_mos2_xmm0511580201_pi300-10000_pass1_cl_src23_src_b10.pi.gz
[Sat Dec 31 07:19:31 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0511580201_pi300-10000_pass1_cl_src23_bgd.pi.gz
[Sat Dec 31 07:43:59 2011] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Dec 31 07:43:59 2011] rmf not generated due to insufficient counts
[Sat Dec 31 08:31:00 2011] Updating aperture counts using extracted products
[Sat Dec 31 08:31:00 2011] Error reading totcts from fullrun_mos2_xmm0511580201_pi300-10000_pass1_cl_src23_src_b10.pi.gz
[Sat Dec 31 08:31:02 2011] Calculating source flux in energy range 0.30-8.00
[Sat Dec 31 08:31:02 2011] Using photon index=1.80, rate=0.00389, arf fullrun_mos2_xmm0511580201_pi300-10000_pass1_cl_src23.arf
[Sat Dec 31 08:31:02 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Dec 31 08:31:02 2011] Updating source flux to 4.1e-14
[Sat Dec 31 08:31:25 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting