[Sat Mar 10 11:43:24 2012] Detection parameters:
  Position = (281.3, 227.7) = 7 8 59.90 -49 37 53.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1624.4 +/- 50.7
  Background counts = 310.1
  Rate = 0.02 +/- 0.0007

[Sat Mar 10 11:43:26 2012] Off-axis axis estimate = 5.28'
[Sat Mar 10 11:56:17 2012] Using EEF radius (= 9.07 ")to estimate initial spatial extent for simple fitting
[Sat Mar 10 11:56:17 2012] Initial guess for spatial extent in simple fitting = 9.07"
[Sat Mar 10 11:56:17 2012] source mask rpix=2.1, npix_max = 26, mask sum = 23, frac = 0.861
[Sat Mar 10 11:56:17 2012] Giving source the simple spatial ID 4 for pass 0, mean size = 9.07"
[Sat Mar 10 15:32:22 2012] fullrun_pn_xmm0511580101_pi300-10000_cl_pass0_src4.ximg exists
[Sat Mar 10 15:32:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0511580101_pi300-10000_cl_pass0_src4.csv
[Sat Mar 10 15:32:22 2012] fullrun_pn_xmm0511580101_pi300-10000_cl_pass0_src4_1.ximg exists
[Sat Mar 10 15:32:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0511580101_pi300-10000_cl_pass0_src4.csv
[Sat Mar 10 15:32:22 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0511580101_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0511580101_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Mar 10 15:32:23 2012] fullrun_pn_xmm0511580101_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Sat Mar 10 15:32:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0511580101_pi300-10000_cl_pass0_tfrozen_src4.csv
[Sat Mar 10 15:32:23 2012] fullrun_pn_xmm0511580101_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Sat Mar 10 15:32:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0511580101_pi300-10000_cl_pass0_tfrozen_src4.csv
[Sat Mar 10 15:32:23 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0511580101_pi300-10000_cl_pass0_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0511580101_pi300-10000_cl_pass0_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Mar 10 18:22:37 2012] Spatial fit model total counts = 3473.830000, observed total counts = 2633.000000
[Sat Mar 10 18:22:37 2012] Poor agreement between spatial fit and data for source 4
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Mar 10 18:22:37 2012] Vigneting correction estimate = 1.000000
[Sat Mar 10 18:22:37 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Mar 10 18:22:37 2012] Assessing source extent using major
[Sat Mar 10 18:22:37 2012] Source does appear to be extended
[Sat Mar 10 18:22:37 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Mar 10 18:23:15 2012] Using EEF radius (= 9.07 ")to estimate initial spatial extent for simple fitting
[Sat Mar 10 18:23:15 2012] Initial guess for spatial extent in simple fitting = 9.07"
[Sat Mar 10 18:23:15 2012] source mask rpix=2.1, npix_max = 26, mask sum = 23, frac = 0.861
[Sat Mar 10 18:23:15 2012] Giving source the simple spatial ID 4 for pass 1, mean size = 9.07"
[Sat Mar 10 20:27:18 2012] fullrun_pn_xmm0511580101_pi300-10000_cl_pass1_src4.ximg exists
[Sat Mar 10 20:27:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0511580101_pi300-10000_cl_pass1_src4.csv
[Sat Mar 10 20:27:18 2012] fullrun_pn_xmm0511580101_pi300-10000_cl_pass1_src4_1.ximg exists
[Sat Mar 10 20:27:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0511580101_pi300-10000_cl_pass1_src4.csv
[Sat Mar 10 20:27:18 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0511580101_pi300-10000_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0511580101_pi300-10000_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Mar 10 20:27:19 2012] fullrun_pn_xmm0511580101_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Sat Mar 10 20:27:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0511580101_pi300-10000_cl_pass1_tfrozen_src4.csv
[Sat Mar 10 20:27:19 2012] fullrun_pn_xmm0511580101_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Sat Mar 10 20:27:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0511580101_pi300-10000_cl_pass1_tfrozen_src4.csv
[Sat Mar 10 20:27:19 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0511580101_pi300-10000_cl_pass1_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0511580101_pi300-10000_cl_pass1_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Mar 10 22:15:14 2012] Spatial fit model total counts = 3473.300000, observed total counts = 2633.000000
[Sat Mar 10 22:15:14 2012] Poor agreement between spatial fit and data for source 4
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Mar 10 22:15:14 2012] Vigneting correction estimate = 1.000000
[Sat Mar 10 22:15:14 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Mar 10 22:15:14 2012] Assessing source extent using major
[Sat Mar 10 22:15:14 2012] Source does appear to be extended
[Sat Mar 10 22:15:14 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Mar 10 22:15:33 2012] Counts = 1624.388062, rescaling region sizes by 2.000000
[Sat Mar 10 22:15:33 2012] XMMSAS src. selection expression = ellipse(24422.196136, 19757.122482, 1305.000000, 1305.000000, 0.000000, X, Y)
[Sat Mar 10 22:15:33 2012] Writing source region out to fullrun_pn_xmm0511580101_pi300-10000_pass1_cl_src4_src.reg
[Sat Mar 10 22:15:33 2012] Extracting stamp from image fullrun_pn_xmm0511580101_pi300-10000_cl_sm2.00.img.gz, (206, 153) - (356, 303)
[Sat Mar 10 22:15:33 2012] XMMSAS bgd. selection expression = annulus(24422.196136, 19757.122482, 4350.000000, 8700.000000, X, Y) && !ellipse(32105.891200, 13867.560800, 464.797613, 464.797613, 0.000000, X, Y) && !ellipse(27984.228160, 25589.114200, 1582.977420, 1582.977420, 0.000000, X, Y) && !ellipse(28636.277222, 13678.754166, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22259.848200, 28178.893800, 396.919211, 396.919211, 0.000000, X, Y) && !ellipse(31143.851501, 19876.839081, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27258.340912, 12024.283279, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31331.604553, 27707.863922, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27672.591858, 17532.705750, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31072.351562, 27000.155243, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28829.680176, 26319.894257, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26652.349060, 13240.443344, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32440.310272, 17754.618408, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24837.023224, 28940.195770, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28560.531891, 26758.953796, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29641.866913, 25335.712067, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25966.608093, 25100.540192, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22950.975372, 25054.605530, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29633.227448, 24524.088196, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32322.100640, 23070.869000, 533.421615, 533.421615, 0.000000, X, Y) && !ellipse(25171.354860, 22799.120000, 523.382415, 326.074409, 259.057000, X, Y) && !ellipse(31153.691040, 22190.873672, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24060.253860, 21925.585800, 461.935213, 329.512009, 92.079553, X, Y) && !ellipse(27347.212708, 10704.246521, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Mar 10 22:15:33 2012] Writing fullrun_pn_xmm0511580101_pi300-10000_pass1_cl_src4.gif
[Sat Mar 10 22:30:23 2012] Mean detx,y = (3890.23, 5471.13) 
[Sat Mar 10 22:31:00 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Mar 10 22:34:19 2012] Binned source spectrum to 10 counts/bin
[Sat Mar 10 22:34:20 2012] Setting source spectrum file to fullrun_pn_xmm0511580101_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Sat Mar 10 22:34:20 2012] Setting bgd. spectrum file to fullrun_pn_xmm0511580101_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Sun Mar 11 01:00:21 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Mar 11 01:00:21 2012] rmf not generated due to insufficient counts
[Sun Mar 11 04:51:09 2012] Updating aperture counts using extracted products
[Sun Mar 11 04:51:09 2012] Error reading totcts from fullrun_pn_xmm0511580101_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Sun Mar 11 04:51:12 2012] Calculating source flux in energy range 0.30-8.00
[Sun Mar 11 04:51:12 2012] Using photon index=1.80, rate=0.0222, arf fullrun_pn_xmm0511580101_pi300-10000_pass1_cl_src4.arf
[Sun Mar 11 04:51:12 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Mar 11 04:51:12 2012] Updating source flux to 7.5e-14
[Sun Mar 11 04:55:22 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting