[Sat Mar 10 11:43:24 2012] Detection parameters:
  Position = (369.6, 160.0) = 7 8 20.30 -49 42 52.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 6374.6 +/- 98.0
  Background counts = 274.5
  Rate = 0.05 +/- 0.0008

[Sat Mar 10 11:43:26 2012] Off-axis axis estimate = 11.29'
[Sat Mar 10 11:56:17 2012] Using EEF radius (= 12.07 ")to estimate initial spatial extent for simple fitting
[Sat Mar 10 11:56:17 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Mar 10 11:56:17 2012] Initial guess for spatial extent in simple fitting = 12.07"
[Sat Mar 10 11:56:17 2012] source mask rpix=2.8, npix_max = 42, mask sum = 42, frac = 0.979
[Sat Mar 10 11:56:17 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 12.07"
[Sat Mar 10 15:32:21 2012] fullrun_pn_xmm0511580101_pi300-10000_cl_pass0_src1.ximg exists
[Sat Mar 10 15:32:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0511580101_pi300-10000_cl_pass0_src1.csv
[Sat Mar 10 15:32:21 2012] fullrun_pn_xmm0511580101_pi300-10000_cl_pass0_src1_1.ximg exists
[Sat Mar 10 15:32:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0511580101_pi300-10000_cl_pass0_src1.csv
[Sat Mar 10 15:32:21 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0511580101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0511580101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Mar 10 15:32:22 2012] fullrun_pn_xmm0511580101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sat Mar 10 15:32:23 2012] fullrun_pn_xmm0511580101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sat Mar 10 15:32:23 2012] Fit fullrun_pn_xmm0511580101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sat Mar 10 18:22:37 2012] Spatial fit model total counts = 9599.130000, observed total counts = 9318.000000
[Sat Mar 10 18:22:37 2012] Offset between fit and detection position for source 1 = 0.019746 pixels
[Sat Mar 10 18:22:37 2012] 9636.450000 total counts/ 5199.860000 bgd. counts: snr = 61.525262
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.019746 pixels
  Position = (369.6, 160.0) = 7 8 20.30 -49 42 51.7
  Extent = 6.2 (6.0-6.4)", rotation angle = 0
  Source counts = 4436.6 +/- 98.2
  Background counts = 5199.9
  Rate = 0.04 +/- 0.0009
[Sat Mar 10 18:22:37 2012] Vigneting correction estimate = 1.000000
[Sat Mar 10 18:22:37 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Mar 10 18:22:37 2012] Assessing source extent using major axis lower bound
[Sat Mar 10 18:22:37 2012] Source does appear to be extended
[Sat Mar 10 18:22:37 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Mar 10 18:23:15 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Mar 10 18:23:15 2012] Initial guess for spatial extent in simple fitting = 6.22"
[Sat Mar 10 18:23:15 2012] source mask rpix=1.4, npix_max = 14, mask sum = 16, frac = 1.075
[Sat Mar 10 18:23:15 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 6.22"
[Sat Mar 10 20:27:18 2012] fullrun_pn_xmm0511580101_pi300-10000_cl_pass1_src1.ximg exists
[Sat Mar 10 20:27:18 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0511580101_pi300-10000_cl_pass1_src1.csv
[Sat Mar 10 20:27:18 2012] fullrun_pn_xmm0511580101_pi300-10000_cl_pass1_src1_1.ximg exists
[Sat Mar 10 20:27:18 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0511580101_pi300-10000_cl_pass1_src1.csv
[Sat Mar 10 20:27:18 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0511580101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0511580101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Mar 10 20:27:19 2012] fullrun_pn_xmm0511580101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sat Mar 10 20:27:19 2012] fullrun_pn_xmm0511580101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sat Mar 10 20:27:19 2012] Fit fullrun_pn_xmm0511580101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sat Mar 10 22:15:14 2012] Spatial fit model total counts = 7334.400000, observed total counts = 7299.000000
[Sat Mar 10 22:15:14 2012] Offset between fit and detection position for source 1 = 0.019654 pixels
[Sat Mar 10 22:15:14 2012] 7365.520000 total counts/ 3166.380000 bgd. counts: snr = 74.624054
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.019654 pixels
  Position = (369.6, 160.0) = 7 8 20.31 -49 42 51.7
  Extent = 5.8 (5.7-6.0)", rotation angle = 0
  Source counts = 4199.1 +/- 85.8
  Background counts = 3166.4
  Rate = 0.04 +/- 0.0008
[Sat Mar 10 22:15:14 2012] Vigneting correction estimate = 1.000000
[Sat Mar 10 22:15:14 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Mar 10 22:15:14 2012] Assessing source extent using major axis lower bound
[Sat Mar 10 22:15:14 2012] Source does appear to be extended
[Sat Mar 10 22:15:14 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Mar 10 22:15:33 2012] Counts = 4199.140000, rescaling region sizes by 2.000000
[Sat Mar 10 22:15:33 2012] XMMSAS src. selection expression = ellipse(32105.891200, 13867.560800, 697.196420, 697.196420, 0.000000, X, Y)
[Sat Mar 10 22:15:33 2012] Writing source region out to fullrun_pn_xmm0511580101_pi300-10000_pass1_cl_src1_src.reg
[Sat Mar 10 22:15:33 2012] Extracting stamp from image fullrun_pn_xmm0511580101_pi300-10000_cl_sm2.00.img.gz, (330, 120) - (410, 200)
[Sat Mar 10 22:15:33 2012] XMMSAS bgd. selection expression = annulus(32105.891200, 13867.560800, 2323.988067, 4647.976134, X, Y) && !ellipse(28636.277222, 13678.754166, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27258.340912, 12024.283279, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27672.591858, 17532.705750, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26652.349060, 13240.443344, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32440.310272, 17754.618408, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27347.212708, 10704.246521, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Mar 10 22:15:33 2012] Writing fullrun_pn_xmm0511580101_pi300-10000_pass1_cl_src1.gif
[Sat Mar 10 22:16:56 2012] Mean detx,y = (12473.74, 1075.22) 
[Sat Mar 10 22:17:06 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Mar 10 22:17:53 2012] Binned source spectrum to 10 counts/bin
[Sat Mar 10 22:17:55 2012] Setting source spectrum file to fullrun_pn_xmm0511580101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sat Mar 10 22:17:55 2012] Setting bgd. spectrum file to fullrun_pn_xmm0511580101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sun Mar 11 04:51:09 2012] Updating aperture counts using extracted products
[Sun Mar 11 04:51:09 2012] Error reading totcts from fullrun_pn_xmm0511580101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sun Mar 11 04:51:11 2012] Calculating source flux in energy range 0.30-8.00
[Sun Mar 11 04:51:11 2012] Using photon index=1.80, rate=0.0376, arf fullrun_pn_xmm0511580101_pi300-10000_pass1_cl_src1.arf
[Sun Mar 11 04:51:11 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Mar 11 04:51:11 2012] Updating source flux to 1.9e-13
[Sun Mar 11 04:57:59 2012] Reading fit data from xmm0511580101/analysis//spectral/fullrun_pn_xmm0511580101_pi300-10000_pass1_cl_src1_pl.csv
[Sun Mar 11 04:57:59 2012] Spectral fit parameter nH value = 2.48953e+20
[Sun Mar 11 04:57:59 2012] Spectral fit parameter PhoIndex value = 2.04705
[Sun Mar 11 04:57:59 2012] Failed to get F(0.3-8.0) from xmm0511580101/analysis//spectral/fullrun_pn_xmm0511580101_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Sun Mar 11 04:57:59 2012] Calculating source flux in energy range 0.30-8.00
[Sun Mar 11 04:57:59 2012] Using Nh = 2.5e+20, photon index=2.05, rate=0.0376, arf fullrun_pn_xmm0511580101_pi300-10000_pass1_cl_src1.arf
[Sun Mar 11 04:57:59 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Mar 11 04:57:59 2012] Updating source flux to 1.7e-13