[Sat Mar 10 11:44:58 2012] Detection parameters:
  Position = (395.1, 441.1) = 7 8 9.18 -49 22 27.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 442.0 +/- 27.8
  Background counts = 60.3
  Rate = 0.004 +/- 0.0002

[Sat Mar 10 11:44:59 2012] Off-axis axis estimate = 12.49'
[Sat Mar 10 16:51:07 2012] Using EEF radius (= 12.68 ")to estimate initial spatial extent for simple fitting
[Sat Mar 10 16:51:07 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Mar 10 16:51:07 2012] Initial guess for spatial extent in simple fitting = 12.68"
[Sat Mar 10 16:51:07 2012] source mask rpix=2.9, npix_max = 46, mask sum = 42, frac = 0.901
[Sat Mar 10 16:51:07 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 12.68"
[Sat Mar 10 18:22:19 2012] fullrun_mos2_xmm0511580101_pi300-10000_cl_pass0_src5.ximg exists
[Sat Mar 10 18:22:19 2012] fullrun_mos2_xmm0511580101_pi300-10000_cl_pass0_src5_1.ximg exists
[Sat Mar 10 18:22:19 2012] Fit fullrun_mos2_xmm0511580101_pi300-10000_cl_pass0_src5 appears to have run properly
[Sat Mar 10 18:22:20 2012] fullrun_mos2_xmm0511580101_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Sat Mar 10 18:22:20 2012] fullrun_mos2_xmm0511580101_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Sat Mar 10 18:22:20 2012] Fit fullrun_mos2_xmm0511580101_pi300-10000_cl_pass0_tfrozen_src5 appears to have run properly
[Sat Mar 10 18:22:58 2012] Warning: source 5 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 4 at 17.158443 pixels away
[Sat Mar 10 18:22:58 2012] Vigneting correction estimate = 1.000000
[Sat Mar 10 18:22:58 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Mar 10 18:22:58 2012] Assessing source extent using major
[Sat Mar 10 18:22:58 2012] Source does appear to be extended
[Sat Mar 10 18:22:58 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Mar 10 21:23:22 2012] Using EEF radius (= 12.68 ")to estimate initial spatial extent for simple fitting
[Sat Mar 10 21:23:22 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Mar 10 21:23:22 2012] Initial guess for spatial extent in simple fitting = 12.68"
[Sat Mar 10 21:23:22 2012] source mask rpix=2.9, npix_max = 46, mask sum = 42, frac = 0.901
[Sat Mar 10 21:23:22 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 12.68"
[Sat Mar 10 22:15:04 2012] fullrun_mos2_xmm0511580101_pi300-10000_cl_pass1_src5.ximg exists
[Sat Mar 10 22:15:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0511580101_pi300-10000_cl_pass1_src5.csv
[Sat Mar 10 22:15:04 2012] fullrun_mos2_xmm0511580101_pi300-10000_cl_pass1_src5_1.ximg exists
[Sat Mar 10 22:15:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0511580101_pi300-10000_cl_pass1_src5.csv
[Sat Mar 10 22:15:04 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0511580101_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0511580101_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Mar 10 22:15:04 2012] fullrun_mos2_xmm0511580101_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Sat Mar 10 22:15:04 2012] fullrun_mos2_xmm0511580101_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Sat Mar 10 22:15:04 2012] Fit fullrun_mos2_xmm0511580101_pi300-10000_cl_pass1_tfrozen_src5 appears to have run properly
[Sat Mar 10 22:15:23 2012] Warning: source 5 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 4 at 12.605052 pixels away
[Sat Mar 10 22:15:23 2012] Vigneting correction estimate = 1.000000
[Sat Mar 10 22:15:23 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Mar 10 22:15:23 2012] Assessing source extent using major
[Sat Mar 10 22:15:23 2012] Source does appear to be extended
[Sat Mar 10 22:15:23 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Mar 11 04:21:38 2012] XMMSAS src. selection expression = ellipse(34322.468506, 38328.448395, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Mar 11 04:21:38 2012] Writing source region out to fullrun_mos2_xmm0511580101_pi300-10000_pass1_cl_src4_src.reg
[Sun Mar 11 04:21:38 2012] Extracting stamp from image fullrun_mos2_xmm0511580101_pi300-10000_cl_sm2.00.img.gz, (358, 404) - (433, 479)
[Sun Mar 11 04:21:38 2012] XMMSAS bgd. selection expression = annulus(34322.468506, 38328.448395, 1087.500000, 2175.000000, X, Y)
[Sun Mar 11 04:21:38 2012] Writing fullrun_mos2_xmm0511580101_pi300-10000_pass1_cl_src4.gif
[Sun Mar 11 04:29:18 2012] Mean detx,y = (8900.43, 11213.12) 
[Sun Mar 11 04:29:19 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Mar 11 04:29:27 2012] Binned source spectrum to 10 counts/bin
[Sun Mar 11 04:29:28 2012] Setting source spectrum file to fullrun_mos2_xmm0511580101_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Sun Mar 11 04:29:28 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0511580101_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Sun Mar 11 04:40:55 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Mar 11 04:40:55 2012] rmf not generated due to insufficient counts
[Sun Mar 11 04:51:18 2012] Updating aperture counts using extracted products
[Sun Mar 11 04:51:18 2012] Error reading totcts from fullrun_mos2_xmm0511580101_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Sun Mar 11 04:51:19 2012] Calculating source flux in energy range 0.30-8.00
[Sun Mar 11 04:51:19 2012] Using photon index=1.80, rate=0.00358, arf fullrun_mos2_xmm0511580101_pi300-10000_pass1_cl_src4.arf
[Sun Mar 11 04:51:19 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Mar 11 04:51:19 2012] Updating source flux to 1.1e-13
[Sun Mar 11 04:54:43 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting