[Sat Mar 10 11:44:58 2012] Detection parameters:
  Position = (170.0, 220.2) = 7 9 49.74 -49 38 24.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 406.5 +/- 27.8
  Background counts = 54.3
  Rate = 0.003 +/- 0.0002

[Sat Mar 10 11:44:59 2012] Off-axis axis estimate = 10.91'
[Sat Mar 10 16:51:07 2012] Using EEF radius (= 11.88 ")to estimate initial spatial extent for simple fitting
[Sat Mar 10 16:51:07 2012] Initial guess for spatial extent in simple fitting = 11.88"
[Sat Mar 10 16:51:07 2012] source mask rpix=2.7, npix_max = 41, mask sum = 30, frac = 0.718
[Sat Mar 10 16:51:07 2012] Giving source the simple spatial ID 6 for pass 0, mean size = 11.88"
[Sat Mar 10 18:22:19 2012] fullrun_mos2_xmm0511580101_pi300-10000_cl_pass0_src6.ximg exists
[Sat Mar 10 18:22:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0511580101_pi300-10000_cl_pass0_src6.csv
[Sat Mar 10 18:22:19 2012] fullrun_mos2_xmm0511580101_pi300-10000_cl_pass0_src6_1.ximg exists
[Sat Mar 10 18:22:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0511580101_pi300-10000_cl_pass0_src6.csv
[Sat Mar 10 18:22:19 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0511580101_pi300-10000_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0511580101_pi300-10000_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Mar 10 18:22:20 2012] fullrun_mos2_xmm0511580101_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Sat Mar 10 18:22:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0511580101_pi300-10000_cl_pass0_tfrozen_src6.csv
[Sat Mar 10 18:22:20 2012] fullrun_mos2_xmm0511580101_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Sat Mar 10 18:22:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0511580101_pi300-10000_cl_pass0_tfrozen_src6.csv
[Sat Mar 10 18:22:20 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0511580101_pi300-10000_cl_pass0_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0511580101_pi300-10000_cl_pass0_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Mar 10 18:22:58 2012] Warning, spatial fit 6 centroid is now closest to src. 32
[Sat Mar 10 18:22:58 2012] Spatial fit model total counts = 703.213000, observed total counts = 703.000000
[Sat Mar 10 18:22:58 2012] Offset between fit and detection position for source 1 = 9.591960 pixels
[Sat Mar 10 18:22:58 2012] Warning, changing simple spatial fit ID from 6 to 34
[Sat Mar 10 18:22:58 2012] 702.142017 total counts/ 702.142000 bgd. counts: snr = 0.000001
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 9.591960 pixels
  Position = (176.2, 212.8) = 7 9 46.98 -49 39 1.2
  Extent = 23.5 (23.5-47.1)", rotation angle = 0
  Source counts = 0.0 +/- 26.5
  Background counts = 702.1
  Rate = 1e-10 +/- 0.0002
  Deleting source due to low Poisson probability